Abstract
In this study, surface error calculations and stability conditions are presented for milling operations in case of slender parts. The dynamic behavior of the flexible beam-type workpiece is modeled by means of finite element method (FEM), while the varying dynamical properties related to the feed motion as well as the material removal process are incorporated in the model. The FEM-generated direct frequency response function is verified through a closed-form solution based on the distributed transfer function method. Relative errors and convergence of the FEM are investigated based on the analytical solutions of the continuum model, from which appropriate element size and mode number can be selected for modal coordinate transformations. The pattern in the variation of the natural frequencies is explored using the analytical model in case of high radial depth of cut relative to the original cross section of the beam-like workpiece. Both the stability conditions and the resulted surface errors are predicted as a function of the tool position. The presented approach and the results are validated by laboratory tests.
Issue Section:
Research Papers
References
1.
Tlusty
, J.
, and Spacek
, L.
, 1954
, Self-Excited Vibrations on Machine Tools
, Nakl. CSAV
, Prague in Czech
.2.
Tobias
, S.
, 1965
, Machine-Tool Vibration
, Blackie
, Glasgow
.3.
Stepan
, G.
, 1989
, Retarded Dynamical Systems
, Longman
, Harlow
.4.
Insperger
, T.
, and Stepan
, G.
, 2011
, Semi-Discretization for Time-Delay Systems
, Vol. 178
, Springer
, New York
.5.
Ding
, Y.
, Zhu
, L. M.
, Zhang
, X. J.
, and Ding
, H.
, 2010
, “A Full-Discretization Method for Prediction of Milling Stability
,” Int. J. Mach. Tools Manuf.
, 50
(5
), pp. 502
–509
. 10.1016/j.ijmachtools.2010.01.0036.
Zhang
, X. J.
, Xiong
, C. H.
, Ding
, Y.
, Feng
, M. J.
, and Xiong
, Y. L.
, 2012
, “Milling Stability Analysis with Simultaneously Considering the Structural Mode Coupling Effect and Regenarative Effect
,” Int. J. Mach. Tools Manuf.
, 53
(1
), pp. 127
–140
. 10.1016/j.ijmachtools.2011.10.0047.
Totis
, G.
, Albertelli
, P.
, Sortino
, M.
, and Monno
, M.
, 2014
, “Efficient Evaluation of Process Stability in Milling With Spindle Speed Variation by Using the Chebyshev Collocation Method
,” J. Sound Vib.
, 333
(3
), pp. 646
–668
. 10.1016/j.jsv.2013.09.0438.
Bayly
, P. V.
, Halley
, J. E.
, Mann
, B. P.
, and Davies
, M. A.
, 2003
, “Stability of Interrupted Cutting by Temporal Finite Element Analysis
,” ASME J. Manuf. Sci. Eng.
, 125
(2
), pp. 220
–225
. 10.1115/1.15568609.
Altintas
, Y.
, and Budak
, E.
, 1995
, “Analytical Prediction of Stability Lobes in Milling
,” CIRP J. Manuf. Sci. Technol.
, 44
(1
), pp. 357
–362
. 10.1016/S0007-8506(07)62342-710.
Budak
, E.
, and Altintas
, Y.
, 1998
, “Analytical Prediction of Chatter Stability in Milling, Part I: General Formulation
,” ASME J. Dyn. Syst.
, 120
(1
), pp. 22
–30
. 10.1115/1.280131711.
Bachrathy
, D.
, and Stepan
, G.
, 2013
, “Improved Prediction of Stability Lobes With Extended Multi Frequency Solution
,” CIRP J. Manuf. Sci. Technol.
, 62
(1
), pp. 411
–414
. 10.1016/j.cirp.2013.03.08512.
Davim
, J.
, 2001
, “A Note on the Determination of Optimal Cutting Conditions for Surface Finish Obtained in Turning Using Design of Experiments
,” J. Mater. Process. Technol.
, 116
(2–3
), pp. 305
–308
. 10.1016/S0924-0136(01)01063-913.
Budak
, E.
, and Altintas
, Y.
, 1995
, “Modeling and Avoidance of Static Form Errors in Peripheral Milling of Plates
,” Int. J. Mach. Tools Manuf.
, 35
(3
), pp. 459
–476
. 10.1016/0890-6955(94)P2628-S14.
Schmitz
, T. L.
, and Mann
, B. P.
, 2006
, “Closed-Form Solutions for Surface Location Error in Milling
,” Int. J. Mach. Tools Manuf.
, 46
(12–13
), pp. 1369
–1377
. 10.1016/j.ijmachtools.2005.10.00715.
Insperger
, T.
, Gradisek
, J.
, Kalveram
, M.
, Stepan
, G.
, Winert
, K.
, and Govekar
, E.
, 2006
, “Machine Tool Chatter and Surface Location Error in Milling Processes
,” ASME J. Manuf. Sci. Eng.
, 128
(4
), pp. 913
–920
. 10.1115/1.228063416.
Zapata
, R.
, DeMarco
, C.
, and Schmitz
, T.
, 2008
, “The Milling Dynamics “Super Diagram”: Combining Stability and Surface Location Error
,” Proceedings of American Society for Precision Engineering Annual Meeting
, Portland, OR
, Oct. 19–24
.17.
Budak
, E.
, Tunc
, L.
, Alan
, S.
, and Özgüven
, H. N.
, 2012
, “Prediction of Workpiece Dynamics and Its Effects on Chatter Stability in Milling
,” CIRP Ann.
, 61
(1
), pp. 339
–342
. 10.1016/j.cirp.2012.03.14418.
Bravo
, U.
, Altuzarra
, O.
, de Lacalle
, L. L.
, Sánchez
, J.
, and Campa
, F.
, 2005
, “Stability Limits of Milling Considering the Flexibility of the Workpiece and the Machine
,” Int. J. Mach. Tools Manuf.
, 45
(15
), pp. 1669
–1680
. 10.1016/j.ijmachtools.2005.03.00419.
Thevenot
, V.
, Arnaud
, L.
, Dessein
, G.
, and Cazenave-Larroche
, G.
, 2006
, “Influence of Material Removal on the Dynamic Behavior of Thin-Walled Structures in Peripheral Milling
,” Mach. Sci. Technol.
, 10
(3
), pp. 275
–287
. 10.1080/1091034060090208220.
Denkena
, B.
, and Schmidt
, C.
, 2007
, “Experimental Investigation and Simulation of Machining Thin-Walled Workpieces
,” Prod. Eng.
, 1
(4
), pp. 343
–350
. 10.1007/s11740-007-0017-921.
Otto
, A.
, Khasawneh
, F. A.
, and Radons
, G.
, 2015
, “Position-Dependent Stability Analysis of Turning With Tool and Workpiece Compliance
,” Int. J. Adv. Manuf. Technol.
, 79
(9–12
), pp. 1453
–1463
. 10.1007/s00170-015-6929-122.
Seguy
, S.
, Dessein
, G.
, and Arnaud
, L.
, 2008
, “Surface Roughness Variation of Thin Wall Milling, Related to Modal Interactions
,” Int. J. Mach. Tools Manuf.
, 48
(3–4
), pp. 261
–274
. 10.1016/j.ijmachtools.2007.09.00523.
Li
, Z.-L.
, Tuysuz
, O.
, Zhu
, L.-M.
, and Altintas
, Y.
, 2018
, “Surface Form Error Prediction in Five-Axis Flank Milling of Thin-Walled Parts
,” Int. J. Mach. Tools Manuf.
, 128
, pp. 21
–32
. 10.1016/j.ijmachtools.2018.01.00524.
Song
, Q.
, Ai
, X.
, and Tang
, W.
, 2011
, “Prediction of Simultaneous Dynamic Stability Limit of Time–Variable Parameters System in Thin-Walled Workpiece High-Speed Milling Processes
,” Int. J. Adv. Manuf. Technol.
, 55
(9–12
), pp. 883
–889
. 10.1007/s00170-010-3139-825.
Tuysuz
, O.
, and Altintas
, Y.
, 2017
, “Frequency Domain Updating of Thin-Walled Workpiece Dynamics Using Reduced Order Substructuring Method in Machining
,” ASME J. Manuf. Sci. Eng.
, 139
(7
), p. 071013
. 10.1115/1.403612426.
Yang
, Y.
, Zhang
, W.-H.
, Ma
, Y.-C.
, Wan
, M.
, and Dang
, X.-B.
, 2019
, “An Efficient Decomposition-Condensation Method for Chatter Prediction in Milling Large-Scale Thin-Walled Structures
,” Mech. Syst. Sig. Process.
, 121
, pp. 58
–76
. 10.1016/j.ymssp.2018.11.01327.
Stepan
, G.
, Kiss
, A. K.
, Ghalamchi
, B.
, Sopanen
, J.
, and Bachrathy
, D.
, 2017
, “Chatter Avoidance in Cutting Highly Flexible Workpieces
,” CIRP Ann.
, 66
(1
), pp. 377
–380
. 10.1016/j.cirp.2017.04.05428.
Kiss
, A. K.
, Bachrathy
, D.
, and Stepan
, G.
, 2016
, “Surface Error and Stability Chart of Beam-Type Workpiece in Milling Processes
,” International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Volume 8: 28th Conference on Mechanical Vibration and Noise
, Charlotte, NC
, Aug. 21–24
.29.
Ewins
, D. J.
, 2000
, Modal Testing, Theory, Practice, and Application
, 2nd ed., Wiley
, Hoboken, NJ
.30.
Yang
, B.
, and Tan
, C. A.
, 1992
, “Transfer Functions of One-Dimensional Distributed Parameter Systems
,” ASME J. Appl. Mech.
, 59
(4
), pp. 1009
–1014
. 10.1115/1.289401531.
Mancisidor
, I.
, Urkiola
, A.
, Barcena
, R.
, Munoa
, J.
, Dombovari
, Z.
, and Zatarain
, M.
, 2014
, “Receptance Coupling for Tool Point Dynamic Prediction by Fixed Boundaries Approach
,” Int. J. Mach. Tools Manuf.
, 78
, pp. 18
–29
. 10.1016/j.ijmachtools.2013.12.00232.
Campa
, F.
, de Lacalle
, L. L.
, and Celaya
, A.
, 2011
, “Chatter Avoidance in the Milling of Thin Floors with Bull-Nose End Mills: Model and Stability Diagrams
,” Int. J. Mach. Tools Manuf.
, 51
(1
), pp. 43
–53
. 10.1016/j.ijmachtools.2010.09.00833.
Sellmeier
, V.
, and Denkena
, B.
, 2011
, “Stable Islands in the Stability Chart of Milling Processes Due to Unequal Tooth Pitch
,” Int. J. Mach. Tools Manuf.
, 51
(2
), pp. 152
–164
. 10.1016/j.ijmachtools.2010.09.00734.
Erneux
, P.
, and Mandel
, T.
, 1986
, “Imperfect Bifurcation With a Slowly-Varying Control Parameter
,” SIAM J. Appl. Math.
, 46
(1
), pp. 1
–16
. 10.1137/014600135.
Haberman
, R.
, 1979
, “Slowly-Varying Jump and Transition Phenomena Associated With Algebraic Bifurcation Problems
,” SIAM J. Appl. Math.
, 37
(1
), pp. 69
–106
. 10.1137/013700636.
Dombovari
, Z.
, Munoa
, J.
, Kuske
, R.
, and Stepan
, G.
, 2018
, “Milling Stability for Slowly Varying Parameters
,” 8th CIRP Conference on High Performance Cutting (HPC 2018)
, Budapest, Hungary
[Procedia CIRP
, 77
, pp. 110
–113
]. 10.1016/j.procir.2018.08.23337.
Timoshenko
, S.
, and Goodier
, J.
, 1969
, Theory of Elasticity
, McGraw-Hill Education
, New York
.38.
Butkovskiy
, A. G.
, 1983
, Structural Theory of Distributed Systems
, Prentice Hall Europe
, Upper Saddle River, NJ
.39.
Schmitz
, T.
, and Donalson
, R.
, 2000
, “Predicting High-Speed Machining Dynamics by Substructure Analysis
,” CIRP Ann.
, 49
(1
), pp. 303
–308
. 10.1016/S0007-8506(07)62951-540.
Rao
, S. S.
, 2007
, Vibration of Continuous Systems
, John Wiley & Sons, Inc.
, Hoboken, NJ
.41.
Altintas
, Y.
, 2012
, Manufacturing Automation – Metal Cutting Mechanics, Machine Tool Vibrations and CNC Design
, 2nd ed., Cambridge University Press
, Cambridge
.42.
Bachrathy
, D.
, Munoa
, J.
, and Stepan
, G.
, 2016
, “Experimental Validation of Appropriate Axial Immersions for Helical Mills
,” Int. J. Adv. Manuf. Technol.
, 84
(5–8
), pp. 1295
–1302
.43.
Dombovari
, Z.
, and Stepan
, G.
, 2012
, “The Effect of Helix Angle Variation on Milling Stability
,” ASME J. Manuf. Sci. Eng.
, 134
(5
), p. 051015
. 10.1115/1.400746644.
Budak
, E.
, Altintas
, Y.
, and Armarego
, E. J. A.
, 1996
, “Prediction of Milling Force Coefficients From Orthogonal Cutting Data
,” ASME J. Manuf. Sci. Eng.
, 118
(2
), pp. 216
–224
. 10.1115/1.283101445.
Bachrathy
, D.
, Insperger
, T.
, and Stepan
, G.
, 2009
, “Surface Properties of the Machined Workpiece for Helical Mills
,” Mach. Sci. Technol.
, 13
(2
), pp. 227
–245
. 10.1080/1091034090301216746.
Bachrathy
, D.
, and Stepan
, G.
, 2012
, “Bisection Method in Higher Dimensions and the Efficiency Number
,” Period. Polytech. Mech. Eng.
, 56
(2
), pp. 81
–86
. 10.3311/pp.me.2012-2.0147.
Kiss
, A. K.
, Bachrathy
, D.
, and Stepan
, G.
, 2018
, “Laser Scanned Patterns of Machined Surfaces
,” 8th CIRP Conference on High Performance Cutting (HPC 2018)
, Elsevier, Amsterdam
[Procedia CIRP 77
(4
), pp. 355
–358
].48.
Dombovari
, Z.
, Iglesias
, A.
, Zatarain
, M.
, and Insperger
, T.
, 2011
, “Prediction of Multiple Dominant Chatter Frequencies in Milling Processes
,” Int. J. Mach. Tools Manuf.
, 51
(6
), pp. 457
–464
. 10.1016/j.ijmachtools.2011.02.002Copyright © 2019 by ASME
You do not currently have access to this content.
