Differential pressure extrusion using double reduction dies was examined. Axisymmetric extrusion experiments using superplastic eutectic alloy of lead-tin were carried out for both single and double reduction extrusions. The flow lines, finite strain distribution at the exit section, and the stress distribution were obtained for the single extrusion and the first stage reduction of the double extrusion. The effect of back pressure induced by the second stage extrusion on the flow behavior and the axial stress distribution was examined. The effect of the intermediate diameter and the intermediate length on the final strain distribution in double extrusion was determined.
Differential Pressure Extrusion Through Double Reduction Dies
A. H. Shabaik
Materials Department, School of Engineering and Applied Science, University of California, Los Angeles, Calif.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Shabaik, A. H. (August 1, 1973). "Differential Pressure Extrusion Through Double Reduction Dies." ASME. J. Eng. Ind. August 1973; 95(3): 890–894. https://doi.org/10.1115/1.3438241
Download citation file:
- Ris (Zotero)
- Reference Manager