Abstract
Distributed production paradigms have grown in discrete manufacturing as discrete products are increasingly made by global, distributed networks. Challenges faced by discrete manufacturing, such as increased globalization, market volatility, workforce shortages, and mass personalization have necessitated scalable solutions that improve the agility of production systems. These challenges have driven the need for better collaboration and coordination in production via improved integration of production systems across the product life cycle. This paper describes key industry use cases to motivate the research and development needed for distributed production in discrete manufacturing. The technological challenges that have hindered distributed production in discrete manufacturing are presented as a state-of-the-art review of the standards and technologies that have been developed to overcome these challenges. Based on this review, future research directions are described to address the needs of industry and achieve the goals of distributed production in discrete manufacturing.
References
1.
Hedberg
, T.
, Helu
, M.
, and Sprock
, T.
, 2018
, “A Standards and Technology Roadmap for Scalable Distributed Manufacturing Systems
,” ASME 2018 13th International Manufacturing Science and Engineering Conference
, College Station, TX
, June 18–22
, Paper No. MSEC2018-6550, V003T02A019. http:dx.doi.org/10.1115/MSEC2018-6550
2.
Lanza
, G.
, Ferdows
, K.
, Kara
, S.
, Mourtzis
, D.
, Schuh
, G.
, Váncza
, J.
, Wang
, L.
, and Wiendahl
, H.-P.
, 2019
, “Global Production Networks: Design and Operation
,” CIRP Ann. Manuf. Technol.
, 68
(2
), pp. 823
–841
. 10.1016/j.cirp.2019.05.0083.
Matt
, D. T.
, Rauch
, E.
, and Dallasega
, P.
, 2015
, “Trends Towards Distributed Manufacturing Systems and Modern Forms for Their Design
,” Procedia CIRP
, 33
, pp. 185
–190
. 10.1016/j.procir.2015.06.0344.
Srai
, J. S.
, Kumar
, M.
, Graham
, G.
, Phillips
, W.
, Tooze
, J.
, Ford
, S.
, Beecher
, P.
, Raj
, B.
, Gregory
, M.
, Tiwari
, M. K.
, Ravi
, B.
, Neely
, A.
, Shankar
, R.
, Charnley
, F.
, and Tiwari
, A.
, 2016
, “Distributed Manufacturing: Scope, Challenges and Opportunities
,” Int. J. Prod. Res.
, 54
(23
), pp. 6917
–6935
. 10.1080/00207543.2016.11923025.
Corwin
, J.
, and Puckett
, R.
, 2009
, “Japan’s Manufacturing Competitiveness Strategy: Challenges for Japan, Opportunities for the United States
,” http://digitalcommons.ilr.cornell.edu/key_workplace/646, Accessed November 20, 2019.6.
Harding
, R.
, 2019
, “Japan’s Workforce Set to Shrink by Almost 13m in Next 20 Years
,” Financial Times
. Accessed November 20, 2019.7.
Subcommittee on Advanced Manufacturing of the Committee on Technology of the National Science and Technology Council
, 2018
, “Strategy for American Leadership in Advanced Manufacturing
,” https://www.whitehouse.gov/wp-content/uploads/2018/10/Advanced-Manufacturing-Strategic-Plan-2018.pdf, Accessed November 20, 2019.8.
World Economic Forum
, 2013
, “Manufacturing for Growth: Strategies for Driving Growth and Employment
,” http://reports.weforum.org/manufacturing-growth/, Accessed November 20, 2019.9.
Thoben
, K.-D.
, Wiesner
, S.
, and Wuest
, T.
, 2017
, “‘Industrie 4.0’ and Smart Manufacturing—A Review of Research Issues and Application Examples
,” Int. J. Autom. Technol.
, 11
(1
), pp. 4
–16
. 10.20965/ijat.2017.p000410.
Hu
, S. J.
, 2013
, “Evolving Paradigms of Manufacturing: From Mass Production to Mass Customization and Personalization
,” Procedia CIRP
, 7
, pp. 3
–8
. 10.1016/j.procir.2013.05.00211.
Schaeffer
, E.
, 2017
, Industry X.0: Realizing Digital Value in Industrial Sectors
, Redline Verlag
, München
.12.
Sharifi
, H.
, and Zhang
, Z.
, 1999
, “A Methodology for Achieving Agility in Manufacturing Organisations: An Introduction
,” Int. J. Prod. Econ.
, 62
(1–2
), pp. 7
–22
. 10.1016/S0925-5273(98)00217-513.
Hedberg
, T.
, Feeney
, A. B.
, Helu
, M.
, and Camelio
, J. A.
, 2017
, “Toward a Lifecycle Information Framework and Technology in Manufacturing
,” ASME J. Comput. Inf. Sci. Eng.
, 17
(2
), p. 021010
. 10.1115/1.403413214.
Evans
, P. C.
, and Annunziata
, M.
, 2012
, “Industrial Internet: Pushing the Boundaries
,” Report, General Electric
.15.
Fischer
, K.
, Rosche
, P.
, Trainer
, A.
, Barnard Feeney
, A.
, and Hedberg
, T.
, Jr., 2015
, “Investigating the Impact of Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain
,” Report NISTGCR 15-1009
, National Institute of Standards and Technology
.16.
Xu
, X.
, 2012
, “From Cloud Computing to Cloud Manufacturing
,” Rob. Comput. Integr. Manuf.
, 28
(1
), pp. 75
–86
. 10.1016/j.rcim.2011.07.00217.
D’Amours
, S.
, Montreuil
, B.
, Lefrancois
, P.
, and Soumis
, F.
, 1999
, “Networked Manufacturing: The Impact of Information Sharing
,” Int. J. Prod. Econ.
, 58
(1
), pp. 63
–79
. 10.1016/S0925-5273(98)00088-718.
Li
, B.-H.
, Zhang
, L.
, Wang
, S.-L.
, Tao
, F.
, Cao
, J.-W.
, Jiang
, X.-D.
, Song
, X.
, and Chai
, X.-D.
, 2010
, “Cloud Manufacturing: A New Service-Oriented Networked Manufacturing Model
,” Comput. Integr. Manuf. Syst.
, 16
(1
), pp. 1
–7
.19.
Lu
, T.-P.
, and Yih
, Y.
, 2001
, “An Agent-Based Production Control Framework for Multiple-Line Collaborative Manufacturing
,” Int. J. Prod. Res.
, 39
(10
), pp. 2155
–2176
. 10.1080/0020754011003847820.
Wang
, L.
, Keshavarzmanesh
, S.
, Feng
, H.-Y.
, and Buchal
, R. O.
, 2009
, “Assembly Process Planning and Its Future in Collaborative Manufacturing: A Review
,” Int. J. Adv. Manuf. Technol.
, 41
(1–2
), pp. 132
–144
. 10.1007/s00170-008-1458-921.
Browne
, J.
, Dubois
, D.
, Rathmill
, K.
, Sethi
, S. P.
, and Stecke
, K. E.
, 1984
, “Classification of Flexible Manufacturing Systems
,” FMS Mag.
, 2
(2
), pp. 114
–117
.22.
ElMaraghy
, H. A.
, 2005
, “Flexible and Reconfigurable Manufacturing Systems Paradigms
,” Int. J. Flexible Manuf. Syst.
, 17
(4
), pp. 261
–276
. 10.1007/s10696-006-9028-723.
The International Society of Automation
, 2010
, “Enterprise-Control System Integration—Part 1: Models and Terminology (ANSI/ISA-95.00.01-2010)
.”24.
Johnsson
, C.
, Brandl
, D.
, and Unger
, K.
, 2006
, “ISA 95 for Beginners
.” Report, WBF—The Forum for Automation and Manufacturing Professionals
.25.
Kraft
, E. M.
, 2016
, “The Air Force Digital Thread/Digital Twin-Life Cycle Integration and Use of Computational and Experimental Knowledge
,” 54th AIAA Aerospace Sciences Meeting
, San Diego, CA
, Jan. 4–8
, p. 0897
.26.
Salado
, A.
, and Nilchiani
, R.
, 2015
, “A Research on Measuring and Reducing Problem Complexity to Increase System Affordability: From Theory to Practice
,” Procedia Comput. Sci.
, 44
, pp. 21
–30
. 10.1016/j.procs.2015.03.03727.
Salado
, A.
, Nilchiani
, R.
, and Verma
, D.
, 2016
, “A Contribution to the Scientific Foundations of Systems Engineering: Solution Spaces and Requirements
,” J. Syst. Sci. Syst. Eng.
, 26
(5
), pp. 549
–589
. 10.1007/s11518-016-5315-328.
Tolk
, A.
, and Muguira
, J. A.
, 2003
, “The Levels of Conceptual Interoperability Model
,” Proceedings of the 2003 Fall Simulation Interoperability Workshop
, Orlando, FL
, Sept. 14–19
, pp. 1
–11
.29.
Wang
, W.
, Tolk
, A.
, and Wang
, W.
, 2009
, “The Levels of Conceptual Interoperability Model: Applying Systems Engineering Principles to M&S
,” Proceedings of the 2009 Spring Simulation Multiconference
, San Diego, CA
, Mar. 22–27
, Article 168
.30.
Kulvatunyou
, B.
, Wallace
, E.
, Kiritsis
, D.
, Smith
, B.
, and Will
, C.
, 2018
, “The Industrial Ontologies Foundry Proof-of-Concept Project,” Advances in Production Management Systems: Smart Manufacturing for Industry 4.0
, Moon
, I.
, Lee
, G. M.
, Park
, J.
, Kiritsis
, D.
, and von Cieminski
, G.
, eds., Springer
, New York
, pp. 402
–409
.31.
Shah
, J. J.
, and Mäntylä
, M.
, 1995
, Parametric and Feature-Based CAD/CAM: Concepts, Techniques, and Applications
, John Wiley & Sons
, Hoboken, NJ
.32.
Srinivasan
, V.
, 1999
, “A Geometrical Product Specification Language Based on a Classification of Symmetry Groups
,” Comput. Aided Des.
, 31
(11
), pp. 659
–668
. 10.1016/S0010-4485(99)00066-433.
International Organization for Standards
, 2014
, “Industrial Automation Systems and Integration—Product Data Representation and Exchange—Part 242: Application Protocol: Managed Model-Based 3D Engineering (ISO 103030-242)
.”34.
Shea
, K.
, Aish
, R.
, and Gourtovaia
, M.
, 2005
, “Towards Integrated Performance-Driven Generative Design Tools
,” Autom. Constr.
, 14
(2
), pp. 253
–264
. 10.1016/j.autcon.2004.07.00235.
International Organization for Standards
, 2014
, “Asset Management—Overview, Principles, and Terminology (ISO 55000:2014)
.”36.
Ameri
, F.
, and Thornhill
, S.
, 2013
, “Manufacturing Capability Inference and Supplier Classification Based on a Formal Thesaurus
,” IFIP International Conference on Advances in Production Management Systems (APMS 2013)
, State College, PA
, Sept. 9–12
, Springer, pp. 344
–351
.37.
Ameri
, F.
, and Sabbagh
, R.
, 2016
, “Digital Factories for Capability Modeling and Visualization
,” IFIP International Conference on Advances in Production Management Systems (APMS 2016)
, Iguassu Falls, Brazil
, Sept. 3–7
, Springer, pp. 69
–78
.38.
Nelaturi
, S.
, Burton
, G.
, Fritz
, C.
, and Kurtoglu
, T.
, 2015
, “Automatic Spatial Planning for Machining Operations
,” 2015 IEEE International Conference on Automation Science and Engineering (CASE)
, Gothenburg, Sweden
, Aug. 24–28
, IEEE, pp. 677
–682
.39.
Defense Advanced Research Projects Agency
, “Adaptive Vehicle Make (AVM) (Archived)
,” https://www.darpa.mil/program/adaptive-vehicle-make, Accessed November 27, 2019.40.
Norman
, D. A.
, 1988
, The Design of Everyday Things
, Basic Books
, New York
.41.
Kim
, N.
, Shin
, D.
, Wysk
, R.
, and Rothrock
, L.
, 2010
, “Using Finite State Automata (FSA) for Formal Modelling of Affordances in Human–Machine Cooperative Manufacturing Systems
,” Int. J. Prod. Res.
, 48
(5
), pp. 1303
–1320
. 10.1080/0020754080258223542.
Fritz
, C.
, 2016
, “Automated Process Planning for CNC Machining
,” AI Mag.
, 37
(3
), pp. 116
–117
. 10.1609/aimag.v37i3.266543.
Hayes
, C.
, and Wright
, P.
, 1989
, “Automating Process Planning: Using Feature Interactions to Guide Search
,” J. Manuf. Syst.
, 8
(1
), pp. 1
–15
. 10.1016/0278-6125(89)90015-044.
Alting
, L.
, and Zhang
, H.
, 1989
, “Computer Aided Process Planning: The State-of-the-Art Survey
,” Int. J. Prod. Res.
, 27
(4
), pp. 553
–585
. 10.1080/0020754890894256945.
Al-wswasi
, M.
, Ivanov
, A.
, and Makatsoris
, H.
, 2018
, “A Survey on Smart Automated Computer-Aided Process Planning (ACAPP) Techniques
,” Int. J. Adv. Manuf. Technol.
, 97
(1–4
), pp. 809
–832
. 10.1007/s00170-018-1966-146.
Li
, X.
, Zhang
, S.
, Huang
, R.
, Huang
, B.
, Xu
, C.
, and Zhang
, Y.
, 2018
, “A Survey of Knowledge Representation Methods and Applications in Machining Process Planning
,” Int. J. Adv. Manuf. Technol.
, 98
(9–12
), pp. 3041
–3059
. 10.1007/s00170-018-2433-847.
Liu
, Y.
, Wang
, L.
, Wang
, X. V.
, Xu
, X.
, and Zhang
, L.
, 2019
, “Scheduling in Cloud Manufacturing: State-of-the-Art and Research Challenges
,” Int. J. Prod. Res.
, 57
(15–16
), pp. 4854
–4879
. 10.1080/00207543.2018.144997848.
Leo Kumar
, S.
, 2019
, “Knowledge-Based Expert System in Manufacturing Planning: State-of-the-Art Review
,” Int. J. Prod. Res.
, 57
(15–16
), pp. 4766
–4790
. 10.1080/00207543.2018.142437249.
ROS Industrial
, 2018
, “IMTS 2018—Leveraging Open Standards and Technologies to Re-Imagine Interoperability Within Factories
,” http://reports.weforum.org/manufacturing-growth/, Accessed December 2, 2019.50.
Duffie
, N.
, 1996
, “Heterarchical Control of Highly Distributed Manufacturing Systems
,” Int. J. Comput. Integr. Manuf.
, 9
(4
), pp. 270
–281
. 10.1080/09511929613156251.
Maturana
, F. P.
, and Norrie
, D. H.
, 1996
, “Multi-Agent Mediator Architecture for Distributed Manufacturing
,” J. Intell. Manuf.
, 7
(4
), pp. 257
–270
. 10.1007/BF0012482852.
Shen
, W.
, and Norrie
, D. H.
, 1999
, “Agent-Based Systems for Intelligent Manufacturing: A State-of-the-Art Survey
,” Knowl. Inf. Syst.
, 1
(2
), pp. 129
–156
. 10.1007/BF0332509653.
West
, T. D.
, and Blackburn
, M.
, 2017
, “Is Digital Thread/Digital Twin Affordable? A Systemic Assessment of the Cost of Dod’s Latest Manhattan Project
,” Procedia Comput. Sci.
, 114
, pp. 47
–56
. 10.1016/j.procs.2017.09.00354.
Hedberg
, T. D.
, Bajaj
, M.
, and Camelio
, J. A.
, 2020
, “Using Graphs to Link Data Across the Product Lifecycle for Enabling Smart Manufacturing Digital Threads
,” ASME J. Comput. Inf. Sci. Eng.
, 20
(1
), p. 011011
. 10.1115/1.404492155.
Wells
, L. J.
, Camelio
, J. A.
, Williams
, C. B.
, and White
, J.
, 2014
, “Cyber-Physical Security Challenges in Manufacturing Systems
,” Manuf. Lett.
, 2
(2
), pp. 74
–77
. 10.1016/j.mfglet.2014.01.00556.
Helu
, M.
, and Hedberg
, T.
, Jr., 2015
, “Enabling Smart Manufacturing Research and Development Using a Product Lifecycle Test Bed
,” Procedia Manuf.
, 1
, pp. 86
–97
. 10.1016/j.promfg.2015.09.06657.
Stouffer
, K.
, Falco
, J.
, and Scarfone
, K.
, 2011
, “Guide to Industrial Control Systems (ICS) Security
,” Report NIST SP800-82
, National Institute of Standards and Technology
.58.
Stouffer
, K.
, Zimmerman
, T.
, Yang
, C.
, Cichonski
, J.
, Shah
, N.
, and Downard
, W.
, 2019
, “Cybersecurity Framework Manufacturing Profile Low Security Level Example Implementations Guide: Volume 3—Discrete-Based Manufacturing System Use Case
,” Report NISTIR 8183A
, National Institute of Standards and Technology
.59.
Hedberg
, T.
, Jr., and Helu
, M.
, 2017
, “Design and Configuration of the Smart Manufacturing Systems Test Bed
,” Report NISTAMS 200-1
, National Institute of Standards and Technology
.60.
International Electrochemical Commission
, 2016
, “OPC Unified Architecture—Part 1: Overview and Concepts
.”61.
MTConnect Institute
, 2018
, “ANSI MTConnect Version 1.4.0 (ANSI/MTC1.4-2018)
.”62.
Ruemler
, S. P.
, Zimmerman
, K. E.
, Hartman
, N. W.
, Hedberg
, T.
, and Barnard Feeny
, A.
, 2017
, “Promoting Model-Based Definition to Establish a Complete Product Definition
,” ASME J. Manuf. Sci. Eng.
, 139
(5
), p. 051008
. 10.1115/1.403462563.
Lynn
, R.
, Sati
, M.
, Tucker
, T.
, Rossignac
, J.
, Saldana
, C.
, and Kurfess
, T.
, 2018
, “Realization of the 5-Axis Machine Tool Digital Twin Using Direct Servo Control From CAM
,” National Institute of Standards and Technology (NIST) 9th Model-Based Enterprise Summit (MBE 2018)
, Gaithersburg, MD
, Apr. 2–5
, pp. 29
–33
.64.
Monnier
, L.
, Bemstein
, W. Z.
, and Foufou
, S.
, 2019
, “A Proposed Mapping Method for Aligning Machine Execution Data to Numerical Control Code
,” 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE)
, Vancouver, BC, Canada
, Aug. 22–26
, IEEE, pp. 66
–72
.65.
Helu
, M.
, Joseph
, A.
, and Hedberg
, T.
, Jr., 2018
, “A Standards-Based Approach for Linking As-Planned to As-Fabricated Product Data
,” CIRP Ann. Manuf. Technol.
, 67
(1
), pp. 487
–490
. 10.1016/j.cirp.2018.04.03966.
Digital Metrology Standards Consortium
, 2018
, “ANSI Quality Information Framework 3.0 (ANSI QIF 3.0)
.”67.
ASME Model-Based Enterprise Steering Group
, 2018
, “Model-Based Enterprise Standards Committee: Recommendation Report
,” Report, American Society of Mechanical Engineers
.68.
Bernstein
, W. Z.
, Hedberg
, T. D.
, Jr., Helu
, M.
, and Feeney
, A. B.
, 2018
, “Contextualising Manufacturing Data for Lifecycle Decision-Making
,” Int. J. Prod. Lifecycle Manage.
, 10
(4
), p. 326
. 10.1504/IJPLM.2017.09032869.
Regli
, W.
, Rossignac
, J.
, Shapiro
, V.
, and Srinivasan
, V.
, 2016
, “The New Frontiers in Computational Modeling of Material Structures
,” Comput. Aided Des.
, 77
, pp. 73
–85
. 10.1016/j.cad.2016.03.002Copyright © 2020 by ASME
You do not currently have access to this content.
