In recent years, cutting tool manufacturers are moving toward improving the robustness of the positioning of an insert in the tool body interface. Increasing the robustness of the interface involves designs with both chamfered and serrated surfaces. These designs have a tendency to overdetermine the positioning and cause instabilities in the interface. Cutting forces generated from the machining process will also plastically deform the interface, consequently, altering the positioning of the insert. Current methodologies within positioning and variation simulation use point-based contacts and assume linear material behavior. In this paper, a first-order reliability-based design optimization framework that allows robust positioning of surface-to-surface-based contacts is presented. Results show that the contact variation over the interface can be limited to predefined contact zones, consequently allowing successful positioning of inserts in early design phases of cutting tool designs.
Reliability-Based Design Optimization of Surface-to-Surface Contact for Cutting Tool Interface Designs
Manuscript received May 28, 2018; final manuscript received January 23, 2019; published online February 27, 2019. Assoc. Editor: Radu Pavel.
- Views Icon Views
- Share Icon Share
- Search Site
Camuz, S., Bengtsson, M., Söderberg, R., and Wärmefjord, K. (February 27, 2019). "Reliability-Based Design Optimization of Surface-to-Surface Contact for Cutting Tool Interface Designs." ASME. J. Manuf. Sci. Eng. April 2019; 141(4): 041006. https://doi.org/10.1115/1.4042787
Download citation file: