This paper provides a comprehensive review on the dressing techniques of diamond grinding wheels. The common techniques with different tools were discussed in detail, which included the bonded SiC and diamond abrasive tools, loose abrasives, soft-elastic abrasive belts, and profiled diamond wheels. Meanwhile, laser dressing, electrical discharge dressing (EDD), and electrolytic in-process dressing (ELID) were also addressed. Some critical problems in the above dressing techniques were then analyzed and summarized for further investigation.

References

References
1.
Heinzel
,
C.
,
Borchers
,
F.
,
Berger
,
D.
, and
Ehle
,
L.
,
2016
, “
Surface and Material Modifications of Tempered Steel After Precision Grinding With Electroplated Coarse Grained Diamond Wheels
,”
Procedia CIRP
,
45
, pp.
191
194
.
2.
Daito
,
M.
,
Kanai
,
A.
, and
Miyashita
,
M.
,
1998
, “
Traverse Grinding Characteristics of Resin Bond Diamond Wheel With New Profile in Precision Grinding of Silicon Wafers
,”
Spring Topical Meeting of the ASPE on Silicon Machining
, Carmel-by-the-Sea, CA, Apr. 13–16, pp.
40
43
.
3.
Grunwald
,
F.
, and
Baswetter
,
G.
, 1979, “
Precision Treatment of Optical Glass With Small-Grained Diamond Grinding Wheels
,”
Eighth Congress of the International Confederation of Measuring Technique
, Moscow, Russia, May 21–27, pp.
219
222
.
4.
Baek
,
S. Y.
,
Lee
,
J. H.
,
Lee
,
E. S.
, and
Lee
,
J. T.
,
2008
, “
Machinability in Precision Grinding of Aspheric Optical Lens With Diamond Wheel
,”
Key Eng. Mater.
,
364–366
, pp.
1162
1167
.
5.
Matsuo
,
T.
,
Touge
,
M.
, and
Yamada
,
H.
,
1997
, “
High-Precision Surface Grinding of Ceramics With Superfine Grain Diamond Cup Wheels
,”
CIRP Ann
.,
46
(1), pp.
249
252
.
6.
Suzuki
,
H.
,
Okada
,
M.
,
Yamagata
,
Y.
,
Morita
,
S.
, and
Higuchi
,
T.
,
2012
, “
Precision Grinding of Structured Ceramic Molds by Diamond Wheel Trued With Alloy Metal
,”
CIRP Ann. Manuf. Technol.
,
61
(
1
), pp.
283
286
.
7.
Xie
,
J.
,
Xie
,
H. F.
,
Luo
,
M. J.
,
Tan
,
T. W.
, and
Li
,
P.
,
2012
, “
Dry Electro-Contact Discharge Mutual-Wear Truing of Micro Diamond Wheel V-Tip for Precision Micro-Grinding
,”
Int. J. Mach. Tools Manuf.
,
60
, pp.
44
51
.
8.
Zhang
,
B.
,
Uematsu
,
T.
, and
Nakajima
,
A.
,
1998
, “
High Efficiency and Precision Grinding of Si3N4 Ceramic Balls Aided by Magnetic Fluid Support Using Diamond Wheels
,”
JSME Int. J. Ser. C
,
41
(
3
), pp.
499
505
.
9.
Zhao
,
Q. L.
, and
Guo
,
B.
,
2015
, “
Ultra-Precision Grinding of Optical Glasses Using Mono-Layer Nickel Electroplated Coarse-Grained Diamond Wheels—Part 1: ELID Assisted Precision Conditioning of Grinding Wheels
,”
Precis. Eng.
,
39
, pp.
56
66
.
10.
Zhang
,
G. F.
,
Zhang
,
B.
,
Deng
,
Z. H.
, and
Tan
,
Y. Q.
,
2010
, “
An Experimental Study on a Noval Diamond Whisker Wheel
,”
CIRP Ann. Manuf. Technol.
,
59
(
1
), pp.
355
360
.
11.
Verkerk
,
J.
,
1979
, “
Slotted Wheels to Avoid Cracks in Precision Grinding
,”
Annual Abrasive Engineering Society Conference/Exhibition
, Pittsburge, PA, May 14–16, pp.
75
81
.
12.
Tawakoli
,
T.
,
Lee
,
D. H.
, and
Daneshi
,
A.
,
2013
, “
Green Grinding With Innovative Wheel Topography
,”
Int. J. Precis. Eng. Manuf.
,
14
(
7
), pp.
1209
1212
.
13.
Nakayama
,
K.
,
Takagi
,
J.
, and
Abe
,
T.
,
1977
, “
Grinding Wheel With Helical Grooves-An Attempt to Improve the Grinding Performance
,”
Manufacturing Technology, 27th General Assembly CIRP
, Delhi, India, Sept. 29–Oct. 3, pp.
133
138
.
14.
Kohler
,
J.
,
Achindler
,
A.
, and
Woiwode
,
S.
,
2012
, “
Continuous Generating Grinding-Tooth Root Machining and Use of CBN-Tools
,”
CIRP Ann. Manuf. Technol.
,
61
(
1
), pp.
291
294
.
15.
Akbari
,
M.
,
Buhl
,
S.
,
Leinenbach
,
C.
, and
Wegener
,
K.
,
2016
, “
A New Value for Johnson Cook Damage Limit Criterion in Machining With Large Negative Rake Angle as Basis for Understanding of Grinding
,”
J. Mater. Process. Technol.
,
234
, pp.
58
71
.
16.
Puerto
,
P.
,
Kirsch
,
B.
,
Madariagn
,
J.
,
Fernandez
,
R.
,
Aurich
,
J. C.
, and
Gallego
,
I.
,
2015
, “
A Comparison of Techniques to Measure the Wear Flat Area of Conventional and Superabrasive Grinding Wheels
,”
ASME J. Tribol.
,
137
(2), p.
024503
.
17.
Ismail
,
M. F.
,
Yanagi
,
K.
, and
Isobe
,
H.
,
2011
, “
Characterization of Geometrical Properties of Electroplated Diamond Tools and Estimation of Its Grinding Performance
,”
Wear
,
271
(
3–4
), pp.
559
564
.
18.
Huang
,
H.
,
2001
, “
Effects of Truing/Dressing Intensity on Truing/Dressing Efficiency and Grinding Performance of Vitrified Diamond Wheels
,”
J. Mater. Process. Technol.
,
117
(
1–2
), pp.
9
14
.
19.
Inasaki
,
I.
,
1989
, “
Dressing of Resinoid Bonded Diamond Grinding Wheels
,”
CIRP Ann. Manuf. Technol.
,
38
(
1
), pp.
315
318
.
20.
Malkin
,
S.
,
1989
,
Grinding Technology: Theory and Applications of Machining With Abrasives
, Society of Manufacturing Engineers, Dearborn, MI, pp.
79
106
.
21.
Rowe
,
W. B.
,
2009
,
Principles of Modern Grinding Technology
,
William Andrew Publishing
, Norwich, NY, pp.
59
78
.
22.
Tsai
,
M. Y.
, and
Liao
,
Y. S.
,
2009
, “
Dressing Characteristics of Oriented Single Diamond on CMP Polyurethane Pad
,”
Mach. Sci. Technol.
,
13
(
1
), pp.
92
105
.
23.
Timmer
,
J. H.
,
2001
, “
Laser konditionieren von CBN-und Diamant-Schleifschei-ben
,” Ph.D. dissertation, Braunschweig University of Technology, Braunschweig, Germany.
24.
Mohamed
,
A. O.
,
Bauer
,
R.
, and
Warkentin
,
A.
,
2013
, “
Application of Shallow Circumferential Grooved Wheels to Creep-Feed Grinding
,”
J. Mater. Process. Technol.
,
213
(
5
), pp.
700
706
.
25.
Aurich
,
J. C.
,
Braun
,
O.
, and
Warnecke
,
G.
,
2003
, “
Development of Superabrasive Grinding Wheel With Defined Grain Structure Using Kinematic Simulation
,”
Ann. CIRP Manuf. Technol.
,
52
(
1
), pp.
275
280
.
26.
Aurich
,
J. C.
,
Herzenstiel
,
P.
,
Sudermann
,
H.
, and
Magg
,
T.
,
2008
, “
High-Performance Dry Grinding Using a Grinding Wheel With a Defined Grain Pattern
,”
Ann. CIRP Manuf. Technol.
,
57
(
1
), pp.
357
362
.
27.
Oliveira
,
J. F. G.
,
Bottene
,
A. C.
, and
France
,
T. V.
,
2010
, “
A Novel Dressing Technique for Texturing of Ground Surfaces
,”
CIRP Ann. Manuf. Technol.
,
59
(
1
), pp.
361
364
.
28.
Deng
,
H.
,
Deng
,
Z. H.
, and
Li
,
S. C.
, 2017, “The Grinding Performance of a Laser-Dressed Bronze-Bonded Diamond Grinding Wheel,”
Int. J. Adv. Manuf. Technol.
,
88
(5–8), pp. 1789–1798.
29.
Walter
,
C.
,
Komischke
,
T.
,
Kuster
,
F.
, and
Wegener
,
K.
,
2014
, “
Laser-Structured Grinding Tools-Generation of Protype Patterns and Performance Evaluation
,”
J. Mater. Process. Technol.
,
214
(
4
), pp.
951
961
.
30.
Rahman
,
M.
,
Kumar
,
A. S.
, and
Biswas
,
I.
,
2009
, “
A Review of Electrolytic in-Process Dressing (ELID) Grinding
,”
Key Eng. Mater.
,
404
, pp.
45
59
.
31.
Schopf
,
M.
,
Beltrami
,
I.
,
Boccadoro
,
M.
, and
Kramer
,
D.
,
2001
, “
ECDM (Electro Chemical Discharge Machining), a New Method for Trueing and Dressing of Metal Bonded Diamond Grinding Tools
,”
CIRP Ann. Manuf. Technol.
,
50
(
1
), pp.
125
128
.
32.
Wegener
,
K.
,
Hoffmeister
,
H. W.
,
Karpuschewski
,
B.
,
Kuster
,
F.
,
Hahmann
,
W. C.
, and
Rabiey
,
M.
,
2011
, “
Conditioning and Monitoring of Grinding Wheels
,”
CIRP Ann. Manuf. Technol.
,
60
(
2
), pp.
757
777
.
33.
Zhang
,
C.
, and
Shin
,
Y. C.
,
2002
, “
A Novel Laser-Assisted Truing and Dressing Technique for Vitrified CBN Wheels
,”
Int. J. Mach. Tools Manuf.
,
42
(7), pp.
825
835
.
34.
Lavine
,
A. S.
,
Malkin
,
S.
, and
Jen
,
T. C.
,
1989
, “
Thermal Aspects of Grinding With cBN Wheels
,”
CIRP Ann. Manuf. Technol.
,
38
(
1
), pp.
557
560
.
35.
Chen
,
X.
,
Rowe
,
W. B.
, and
Cai
,
R.
,
2002
, “
Precision Grinding Using CBN Wheels
,”
Int. J. Mach. Tools Manuf.
,
42
(
5
), pp.
585
593
.
36.
Inasaki
,
I.
,
1987
, “
Creep Feed Grinding With Continuous Dressing
,”
CIRP Ann. Manuf. Technol.
,
36
(
1
), pp.
227
230
.
37.
Takagi
,
J.
, and
Liu
,
M.
,
1996
, “
Fracture Characteristics of Grain Cutting Edges of CBN Wheel in Truing Operation
,”
J. Mater. Process. Technol.
,
62
(
4
), pp.
397
402
.
38.
Chen
,
B.
,
Guo
,
B.
, and
Zhao
,
Q. L.
,
2015
, “
On-Machine Precision Form Truing of Arc-Shaped Diamond Wheels
,”
J. Mater. Process. Technol.
,
223
, pp.
65
74
.
39.
Derkx
,
J. M.
,
Hoogstrate
,
A. M.
,
Saurwalt
,
J. J.
, and
Karpuschewski
,
B.
,
2008
, “
Form Crush Dressing of Diamond Grinding Wheels
,”
CIRP Ann. Manuf. Technol.
,
57
(
1
), pp.
349
352
.
40.
Filho
,
N. M.
,
Coelho
,
R. T.
, and
Oliveira
,
J. F. G.
,
1999
, “
Analysis of Dressing Performance Using Single Crystal Diamond Dresser
,”
Ind. Diamond Rev.
,
59
(
581
), pp.
133
142
.
41.
Subramanian
,
K.
, and
Lindsay
,
R. P. A.
,
1992
, “
A Systems Approach for the Use of Vitrified Bonded Superabrasive Wheels for Precision Production Grinding
,”
ASME J. Eng. Ind.
,
114
(1), pp.
41
52
.
42.
Syoji
,
K.
,
1989
, “
Truing and Dressing of Superabrasive Wheels
,”
Mach. Tools
,
2
, pp.
18
26
.
43.
Zhou
,
Y.
,
Atwood
,
M.
,
Golini
,
D.
,
Smith
,
M.
, and
Paul
,
D.
,
1998
, “
Wear and Self-Sharpening of Vitrified Bond Diamond Wheels During Sapphire Grinding
,”
Wear
,
219
(
1
), pp.
42
45
.
44.
Shih
,
A. J.
,
1998
, “
Rotary Truing of Vitreous Bond Diamond Grinding Wheels Using Metal Bond Diamond Disks
,”
Mach. Sci. Technol.
,
2
(
1
), pp.
13
18
.
45.
Syoji
,
K.
, and
Piao
,
C. G.
,
1991
, “
Studies on Truing of Diamond Vitrified Wheels—II: Truing Mechanism With Cup-Truer
,”
Int. J. Jpn. Soc. Precis. Eng.
,
25
(
4
), pp.
285
290
.
46.
Williams
,
J.
, and
Yazdzik
,
H.
,
1993
, “
In-Process Dressing Characteristics of Vitrified Bonded CBN Grinding Wheels
,”
ASME J. Eng. Gas Turbines Power
,
115
(1), pp.
200
204
.
47.
Brinksmeier
,
E.
, and
Cinar
,
M.
,
1995
, “
Characterization of Dressing Processes by Determination of the Collision Number of the Abrasive Grits
,”
CIRP Ann. Manuf. Technol.
,
44
(
1
), pp.
299
304
.
48.
Klocke
,
F.
, and
Konig
,
W.
,
1995
, “
Appropriate Conditioning Strategies Increase the Performance Capabilities of Vitrified-Bond CBN Grinding Wheels
,”
CIRP Ann. Manuf. Technol.
,
44
(
1
), pp.
305
310
.
49.
Prusak
,
Z.
,
Webster
,
J. A.
, and
Marinescu
,
D.
,
1997
, “
Influence of Dressing Parameters on Grinding Performance of CBN/Seed Gel Hybrid Wheels in Cylindrical Grinding
,”
Int. J. Prod. Res.
,
35
(
10
), pp.
2899
2915
.
50.
Blunt
,
L.
, and
Ebdon
,
S.
,
1996
, “
Application of Three-Dimensional Surface Measurement Techniques to Characterizing Grinding Wheel Topography
,”
Int. J. Mach. Tools Manuf.
,
36
(
11
), pp.
1207
1226
.
51.
Bohlheim
,
W.
,
1997
, “
Method for Determining Grinding Wheel Topography
,”
Ind. Diamond Rev.
,
57
(
573
), pp.
58
62
.
52.
Syoji
,
K.
,
Zhou
,
L. B.
, and
Matsui
,
S.
,
1990
, “
Studies on Truing and Dressing of Diamond Wheels—The Measurement of Protrusion Height of Abrasive Grains by Using a Stereopair and Influence of Protrusion Height on Grinding Performance
,”
Bull. JSPE
,
24
(
2
), pp.
124
129
.
53.
Chen
,
X.
,
Rowe
,
W. B.
,
Allanson
,
D. R.
, and
Mills
,
B. A.
,
1999
, “
Grinding Power Model for Selection of Dressing and Grinding Conditions
,”
ASME J. Manuf. Sci. Eng.
,
121
(
4
), pp.
632
637
.
54.
Hassui
,
A. E.
,
Diniz
,
J. F. G.
, and
Felipe
,
J. J. F.
,
1998
, “
Experimental Evaluation on Grinding Wheel Wear Through Vibration and Acoustic Emission
,”
Wear
,
217
(
1
), pp.
7
14
.
55.
Kato
,
Y.
,
1990
, “
Optimum Dressing of Vitrified Bond CBN Wheels and Its Effect on the Residual Stress of the Workpiece
,”
Fourth International Grinding Conference
, Dearborn, MI, Oct. 9–11, pp.
228
234
.
56.
Maksoud
,
T. M. A.
,
Mokbel
,
A. A.
, and
Morgan
,
J. E.
,
1997
, “
In-Process Detection of Grinding Wheel Truing and Dressing Conditions Using a Flapper Nozzle Arrangement
,”
J. Eng. Manuf.
,
211
(
5
), pp.
335
343
.
57.
Torrance
,
A. A.
, and
Badger
,
J. A.
,
2000
, “
The Relation Between the Traverse Dressing of Vitrified Grinding Wheels and Their Performance
,”
Int. J. Mach. Tools Manuf.
,
40
(
12
), pp.
1787
1811
.
58.
Mochida
,
M.
,
Kubo
,
A.
,
Tamaki
,
J.
,
Harano
,
K.
,
Sumiya
,
H.
, and
Ullah
,
A. M. M. S.
,
2012
, “
Performance of Newly Developed Single-Point Diamond Dresser in Terms of Cutting-Point Rake Angle
,”
Adv. Mater. Res.
,
565
, pp.
205
210
.
59.
Zhang
,
K.
,
Su
,
H. H.
, and
Dai
,
F. M.
,
2014
, “
Study on the Dullness of Monolayer Brazed Diamond Grinding Wheel Through Plate Wheel Dressing
,”
Adv. Mater. Res.
,
1027
, pp.
159
162
.
60.
Tawakoli
,
T.
, and
Daneshi
,
A.
,
2012
, “
T-Dress, a Novel Approach in Dressing and Structuring of Grinding Wheels
,”
Adv. Mater. Res.
,
565
, pp.
217
221
.
61.
Chowdhury
,
M. A. K.
,
Kubo
,
A.
,
Tamaki
,
J.
, and
Sharifullah
,
A. M. M.
,
2013
, “
Computer-Aided Simulation of Rotary Diamond Dressing Based on Kinematic Analysis
,”
J. Adv. Mech. Des., Syst., Manuf.
,
7
(
4
), pp.
506
520
.
62.
Kubo
,
A.
, and
Tamaki
,
J.
,
2007
, “
Development of Solid-Type Diamond Rotary Dresser Utilizing CVD Diamond Disc Application to Low-Spped Dresser
,”
Key Eng. Mater.
,
329
, pp.
187
194
.
63.
Shih
,
A. J.
,
2000
, “
An Experimental Investigation of Rotary Diamond Truing and Dressing of Vitreous Bond Wheels for Ceramic Grinding
,”
Int. J. Mach. Tools Manuf.
,
40
(
12
), pp.
1755
1774
.
64.
Chang
,
X. L.
,
Wu
,
H. Y.
, and
Peng
,
Y. F.
,
2014
, “
Research on the 2-Axis Cup-Wheel Dressing Technology of Arc-Diamond Grinding Wheel
,”
7th International Symposium on Advanced Optical Manufacturing and Testing Technologies
, Harbin, China, Apr. 26–29, p. 92811X.
65.
Su
,
H. H.
,
Fu
,
Y. C.
,
Xu
,
J. H.
,
Ding
,
W. F.
, and
Xu
,
H. J.
,
2010
, “
Dressing of Monolayer Brazed Diamond Wheel for Grinding Li-Ti Ferrite
,”
Adv. Mater. Res.
,
126-128
, pp.
995
1000
.
66.
Hessel
,
D.
,
2003
, “
Punktcrushieren Karamisch Gebundener Diamanschleifscheiben
,” Ph.D. Dissertation, University of Hannover, Hannover, Germany.
67.
Chen
,
W. K.
,
Huang
,
H.
, and
Yin
,
L.
,
2005
, “
Loose Abrasive Truing and Dressing of Resin Bond Diamond Cup Wheels for Grinding Fibre Optic Connectors
,”
J. Mater. Process. Technol.
,
159
(
2
), pp.
229
239
.
68.
Yao
,
P.
,
Wei
,
W.
,
Huang
,
C. Z.
,
Wang
,
J.
,
Zhu
,
H. T.
, and
Zhang
,
Z. Y.
,
2014
, “
High Efficiency Abrasive Waterjet Dressing of Diamond Grinding Wheel
,”
Adv. Mater. Res.
,
1017
, pp.
243
248
.
69.
Ma
,
M. X.
,
Ying
,
B. G.
, and
Wang
,
X. K.
,
2000
, “
Soft-Elastic Dressing of Fine Grain Diamond Wheels
,”
J. Mater. Process. Technol.
,
103
(
2
), pp.
194
199
.
70.
Su
,
H. H.
,
Dai
,
J. B.
,
Ding
,
W. F.
,
Zhang
,
K.
, and
Xu
,
W.
,
2016
, “
Experimental Research on Performance of Monolayer Brazed Diamond Wheel Through a New Precise Dressing Method-Plate Wheel Dressing
,”
Int. J. Adv. Manuf. Technol.
,
87
(
9–12
), pp.
3249
3259
.
71.
Chen
,
Y. Q.
, and
Zhang
,
L. C.
,
2013
,
Polishing of Diamond Materials: Mechanisms, Modeling and Implementation
,
Springer
, London, pp. 11–20.
72.
Su
,
H. H.
,
Xu
,
J. H.
,
Fu
,
Y. C.
,
Ding
,
W. F.
, and
Wang
,
S.
,
2010
, “
Experimental Study on Performance of Monolayer Brazed Diamond Wheel Through Plate Wheel Dressing
,”
Adv. Mater. Res.
,
325
, pp.
208
212
.
73.
Riemer
,
O.
, and
Mutlugünes
,
Y.
,
2012
, “
Thermo-Chemical Dressing of Coarse Grained Diamond Grinding Wheels
,”
Adv. Mater. Res.
,
565
, pp.
211
216
.
74.
Lv
,
B. H.
,
Wu
,
Z.
,
Yuan
,
J. L.
, and
Fan
,
H. W.
,
2011
, “
Dressing Process of Porous Self-Generation Superabrasive Tool
,”
Adv. Mater. Res.
,
325
, pp.
183
188
.
75.
Brinksmeier
,
E.
,
Aurich
,
J. C.
,
Govekar
,
E.
,
Heinzel
,
C.
,
Hoffmeister
,
H. W.
,
Klocke
,
F.
,
Peters
,
J.
,
Rentsch
,
R.
,
Stephenson
,
D. J.
,
Uhlmann
,
E.
,
Weinert
,
K.
, and
Wittmann
,
M.
,
2006
, “
Advances in Modeling and Simulation of Grinding Process
,”
CIRP Ann. Manuf. Technol.
,
55
(
2
), pp.
667
696
.
76.
Butler
,
D. L.
,
Blunt
,
L. A.
,
See
,
B. K.
,
Webster
,
J. A.
, and
Stout
,
K. J.
,
2002
, “
The Characterisation of Grinding Wheels Using 3D Surface Measurement Techniques
,”
J. Mater. Process. Technol.
,
127
(
2
), pp.
234
237
.
77.
Zhou
,
X.
, and
Xi
,
F.
,
2002
, “
Modeling and Predicting Surface Roughness of the Grinding Process
,”
Int. J. Mach. Tools Manuf.
,
42
(
8
), pp.
969
977
.
78.
Mahmoud
,
T.
,
Tamaki
,
J.
, and
Yan
,
J.
,
2003
, “
Three-Dimensional Shape Modeling of Diamond Abrasive Grains Measured by a Scanning Laser Microscope
,”
Key Eng. Mater.
,
238–239
, pp.
131
136
.
79.
Huo
,
F. W.
,
Jin
,
Z. J.
,
Kang
,
R. K.
,
Guo
,
D. M.
, and
Yang
,
C.
,
2008
, “
Recognition of Diamond Grains on Surface of Fine Diamond Grinding Wheel
,”
Front. Mech. Eng. China
,
3
(
3
), pp.
325
331
.
80.
Hecker
,
R. L.
,
Ramoneda
,
I. M.
, and
Liang
,
S. Y.
,
2003
, “
Analysis of Wheel Topography and Grit Force for Grinding Process Modeling
,”
J. Manuf. Processes
,
5
(
1
), pp.
13
23
.
81.
Herzenstiel
,
P.
, and
Aurich
,
J. C.
,
2010
, “
CBN-Grinding Wheel With a Defined Grain Pattern-Extensive Numerical and Experimental Studies
,”
Mach. Sci. Technol.
,
14
(
3
), pp.
301
322
.
82.
Kubo
,
A.
,
Sharif Ullah
,
A. M. M.
, and
Tamaki
,
J.
,
2014
, “
Computer-Aided Simulation of Dressing Using Diamond Rotary Dresser and Visualization of Dressing Process
,”
Adv. Mater. Res.
,
1017
, pp.
592
597
.
83.
Martins
,
C. H. R.
,
Aguiar
,
P. R.
,
Frech
,
A.
, and
Bianchi
,
E. C.
,
2014
, “
Tool Condition Monitoring of Single-Point Dresser Using Acoustic Emission and Neural Networks Models
,”
IEEE Trans. Instrum. Meas.
,
63
(
3
), pp.
667
679
.
84.
Lefebvre
,
A.
,
Sinot
,
O.
, and
Torrance
,
A.
,
2013
, “
Optimization of Dressing Conditions for a Resin-Bonded Diamond Wheel by Topography Analysis
,”
Mach. Sci. Technol.
,
17
(
2
), pp.
312
324
.
85.
Westkaemper
,
E.
,
1995
, “
Grinding Assisted by Nd:YAG Lasers
,”
CIRP Ann. Manuf. Technol.
,
44
(
1
), pp.
317
320
.
86.
Bathe
,
R.
,
Singh
,
A. K.
, and
Padmanabham
,
G.
,
2014
, “
Effect of Pulsed Laser Dressing of Metal-Bonded Diamond Wheel on Cutting Cutting Performance
,”
Mater. Manuf. Processes
,
29
(
3
), pp.
386
389
.
87.
Deng
,
H.
,
Chen
,
G. Y.
,
Zhou
,
C.
,
Zhou
,
X. C.
,
He
,
J.
, and
Zhang
,
Y.
,
2014
, “
A Theoretical and Experimental Study on the Pulsed Laser Dressing of Bronze-Bonded Diamond Grinding Wheels
,”
Appl. Surf. Sci.
,
314
, pp.
78
89
.
88.
Nakajima
,
T.
,
Ohashi
,
K.
,
Sun
,
L. X.
, and
Jitsumori
,
K.
,
1993
, “
Dressing of Resinoid Bond Wheel With Moving Heat Source (1st)—Transformation of Wheel Surface With a Single Pulse Irradiation of YAG Laser
,”
J. JSPE
,
59
(
12
), pp.
1967
1972
.
89.
Nakajima
,
T.
,
Ohashi
,
K.
,
Sun
,
L. X.
,
Jitsumori
,
K.
, and
Yagi
,
D.
,
1995
, “
Dressing of Resinoid Bond Wheel With Moving Heat Source (2nd)—Dressing Effect With YAG Laser
,”
J. JSPE
,
61
(
4
), pp.
556
560
.
90.
Nakajima
,
T.
,
Ohashi
,
T.
, and
Yagi
,
D.
,
1997
, “
Dressing of Resinoid Bond Wheel With Moving Heat Source (3rd)—Improvement of Dressing Effect With Q-Switch YAG Laser
,”
J. JSPE
,
63
(
8
), pp.
1153
1157
.
91.
Tamaki
,
J.
,
Futamata
,
M.
, and
Iyama
,
T.
,
1997
, “
Laser Beam Aided Truing of Electroplated Diamond Grinding Quill
,”
J. JSPE
,
63
(
12
), pp.
1730
1734
.
92.
Xie
,
X. Z.
,
Chen
,
G. Y.
, and
Li
,
L. J.
,
2004
, “
Dressing of Resin-Bonded Superabrasive Grinding Wheels by Means of Acousto-Optical Q-Switched Pulsed Nd:YAG Laser
,”
Opt. Laser Technol.
,
36
(
5
), pp.
409
419
.
93.
Babu
,
N. R.
, and
Radhakrishnan
,
V.
,
1989
, “
Investigations on Laser Dressing of Grinding Wheels—Part II: grinding Performance of a Laser Dressed Aluminum Oxide Wheel
,”
ASME J. Eng. Ind.
,
111
(
3
), pp.
253
261
.
94.
Chen
,
G. Y.
,
Mei
,
L. F.
,
Zhang
,
B.
,
Yu
,
C. R.
, and
Shun
,
K. J.
,
2010
, “
Experiment and Numerical Simulation Study on Laser Truing and Dressing of Bronze-Bonded Diamond Wheel
,”
Opt. Lasers Eng.
,
48
(
3
), pp.
295
304
.
95.
Dold
,
C.
,
Transchel
,
R.
,
Rabiey
,
M.
,
Langenstein
,
P.
,
Jaeger
,
C.
,
Pude
,
F.
,
Kuster
,
F.
, and
Wegener
,
K.
,
2011
, “
A Study on Laser Touch Dressing of Electroplated Diamond Wheels Using Pulsed Picosecond Laser Sources
,”
CIRP Ann. Manuf. Technol.
,
60
(
1
), pp.
363
366
.
96.
Deng
,
H.
,
Chen
,
G. Y.
,
Zhou
,
C.
,
Li
,
S. C.
, and
Zhang
,
M. J.
,
2014
, “
Processing Parameter Optimization for the Laser Dressing of Bronze-Bonded Diamond Wheels
,”
Appl. Surf. Sci.
,
290
, pp.
475
481
.
97.
Hosokawa
,
A.
,
Ueda
,
T.
, and
Yunoki
,
T.
,
2006
, “
Laser Dressing of Metal Bonded Diamond Wheel
,”
CIRP Ann. Manuf. Technol.
,
55
(
1
), pp.
329
332
.
98.
Witzendorff
,
P.
,
Stompe
,
M.
,
Moalem
,
A.
,
Cvetkovic
,
S.
,
Suttmann
,
O.
,
Overmeyer
,
L.
, and
Rissing
,
L.
,
2014
, “
Dicing of Hard and Brittle Materials With on-Machine Laser-Dressed Metal-Bonded Diamond Blades
,”
Precis. Eng.
,
38
(
1
), pp.
162
167
.
99.
Wang
,
X. Y.
,
Wu
,
Y. B.
,
Wang
,
J.
,
Xu
,
W. J.
, and
Kato
,
M.
,
2005
, “
Absorbed Energy in Laser Truing of a Small Vitrified CBN Grinding Wheel
,”
J. Mater. Process. Technol.
,
164–165
, pp.
1128
1133
.
100.
Kang
,
R. L.
,
Yuan
,
J. T.
,
Zhang
,
Y. P.
, and
Ren
,
J. X.
,
2001
, “
Truing of Diamond Wheels by Laser
,”
Key Eng. Mater.
,
202–203
, pp.
137
142
.
101.
Yung
,
K. C.
,
Chen
,
G. Y.
, and
Li
,
L. J.
,
2003
, “
The Laser Dressing of Resin-Bonded CBN Wheels by a Q-Switched Nd:YAG Laser
,”
Int. J. Adv. Manuf. Technol.
,
22
(
7–8
), pp.
541
546
.
102.
Kunieda
,
Y.
,
Matsuura
,
H.
,
Kodama
,
S.
,
Yoshihara
,
N.
,
Yan
,
J.
, and
Kuriyagawa
,
T.
,
2007
, “
Development of a New Laser Conditioning Method for Ultra-Fine Grit Diamond Wheels
,”
Key Eng. Mater.
,
329
, pp.
175
180
.
103.
Wang
,
X. J.
,
Wang
,
R. K.
,
Xu
,
W. J.
,
Wang
,
L. J.
, and
Guo
,
D. M.
,
2007
, “
Modeling of Laser Dressing for Metal-Bond Diamond Grinding Wheel
,”
Key Eng. Mater.
,
329
, pp.
145
150
.
104.
Cai
,
S.
,
Chen
,
G. Y.
,
Zhou
,
C.
, and
Deng
,
H.
,
2015
, “
The Mechanism and Application of Bronze-Bond Diamond Grinding Wheel Pulsed Laser Dressing Based on Phase Explosion
,”
Int. J. Adv. Manuf. Technol.
,
80
(
9–12
), pp.
1641
1653
.
105.
Chen
,
G. Y.
,
Deng
,
H.
,
Zhou
,
X. C.
,
Zhou
,
C.
,
He
,
J.
, and
Cai
,
S.
,
2015
, “
Online Tangential Laser Profiling of Coarse-Grained Bronze-Bonded Diamond Wheels
,”
Int. J. Adv. Manuf. Technol.
,
79
(
9–12
), pp.
1477
1482
.
106.
Walter
,
C.
,
Rabiey
,
M.
,
Warhanek
,
M.
,
Jochum
,
N.
, and
Wegener
,
K.
,
2012
, “
Dressing and Truing of Hybrid Bonded CBN Grinding Tools Using a Short-Pulsed Fibre Laser
,”
CIRP Ann. Manuf. Technol.
,
61
(
1
), pp.
279
282
.
107.
Guo
,
B.
,
Zhao
,
Q. L.
, and
Fang
,
X. Y.
,
2014
, “
Precision Grinding of Optical Glass With Laser Micro-Structured Coarse-Grained Diamond Wheels
,”
J. Mater. Process. Technol.
,
214
(
5
), pp.
1045
1051
.
108.
Guo
,
B.
,
Zhao
,
Q. L.
, and
Yu
,
X.
,
2014
, “
Surface Micro-Structuring of Coarse-Grained Diamond Wheels by Nanosecond Pulsed Laser for Improving Grinding Performance
,”
Int. J. Precis. Eng. Manuf.
,
15
(
10
), pp.
2025
2030
.
109.
Warhanek
,
M.
,
Walter
,
C.
,
Huber
,
S.
,
Hanni
,
F.
, and
Wegener
,
K.
,
2015
, “
Cutting Characteristics of Electroplated Diamond Tools With Laser-Generated Positive Clearance
,”
CIRP Ann. Manuf. Technol.
,
64
(
1
), pp.
317
320
.
110.
Transchel
,
R.
,
Heini
,
F.
,
Stirnimann
,
J.
,
Kuster
,
F.
,
Leinenbach
,
C.
, and
Wegener
,
K.
,
2013
, “
Influence of the Clearance Angle on the Cutting Efficiency of Blunt, Octahedral-Shaped Diamonds in an Active Filler Alloy
,”
Int. J. Mach. Tools Manuf.
,
75
, pp.
9
15
.
111.
Transchel
,
R.
,
Leinenbach
,
C.
, and
Wegener
,
K.
,
2014
, “
Cutting and Ploughing Forces for Small Clearance Angles of Hexa-Octahedron Shaped Diamond Grains
,”
CIRP Ann. Manuf. Technol.
,
63
(
1
), pp.
325
328
.
112.
Suzuki
,
K.
,
Uematsu
,
T.
, and
Nakagawa
,
T.
,
1987
, “
On-Machine Truing/Dressing of Metal Bond Diamond Grinding Wheels by Electro-Discharge Machining
,”
CIRP Ann. Manuf. Technol.
,
36
(
1
), pp.
115
118
.
113.
Qian
,
J.
,
Li
,
W.
, and
Ohmori
,
H.
,
2000
, “
Precision Internal Grinding With a Metal Bonded Diamond Grinding Wheel
,”
J. Mater. Process. Technol.
,
105
(
1–2
), pp.
80
86
.
114.
Sanchez
,
J. A.
,
Ortega
,
N.
,
Lopez de Lacalle
,
L. N.
,
Lamikiz
,
A.
, and
Maranon
,
J. A.
,
2006
, “
Analysis of the Electro Discharge Dressing (EDD) Process of Large Grit Size CBN Grinding Wheels
,”
Int. J. Adv. Manuf. Technol.
,
29
(
7–8
), pp.
688
694
.
115.
Tonshoff
,
H. K.
, and
Friemuth
,
T.
,
2000
, “
In-Process Dressing of Fine Diamond Wheels for Tool Grinding
,”
Precis. Eng.
,
24
(
1
), pp.
58
61
.
116.
Wang
,
X. K.
,
Ying
,
B. G.
, and
Liu
,
W. G.
,
1996
, “
EDM Dressing of Fine Grain Super Abrasive Grinding Wheel
,”
J. Mater. Process. Technol.
,
62
(
4
), pp.
299
302
.
117.
Kubo
,
A.
,
Yan
,
J.
, and
Narita
,
K.
,
2003
, “
Electrocontact Discharge Dressing of a Resin-Bonded CBN Grinding Wheel and Its Performance
,”
Key Eng. Mater.
,
238–239
, pp.
327
332
.
118.
Denkena
,
B.
,
Becker
,
J. C.
, and
Van der Meer
,
M.
,
2004
, “
Potential of Electro Contact Discharge Dressing Metod in Truing and Sharpening Superabrasive Grinding Wheels
,”
Key Eng. Mater.
,
257–258
, pp.
353
359
.
119.
Kunieda
,
M.
,
Lauwers
,
B.
,
Rajurkar
,
K. P.
, and
Schumacher
,
B. M.
,
2005
, “
Advancing EDM Through Fundamental Insight Into the Process
,”
CIRP Ann. Manuf. Technol.
,
54
(
2
), pp.
64
87
.
120.
Xu
,
M. M.
,
Li
,
D. D.
,
Hu
,
D. J.
, and
Jia
,
Y.
,
2012
, “
Laminated Manufacturing and Milling Electrical Discharge Dressing of Metal-Bonded Diamond Grinding Wheels
,”
Proc. Inst. Mech. Eng. Part B
,
226
(
1
), pp.
137
144
.
121.
Weingartner
,
E.
,
Roth
,
R.
,
Kuster
,
F.
,
Boccadoro
,
M.
, and
Fiebelkorn
,
F.
,
2012
, “
Electrical Discharge Dressing and Its Influence on Metal Bonded Diamond Wheels
,”
CIRP Ann. Manuf. Technol.
,
61
(
1
), pp.
183
186
.
122.
Klink
,
A.
,
2010
, “
Wire Electro Discharge Trueing and Dressing of Fine Grinding Wheels
,”
CIRP Ann. Manuf. Technol.
,
59
(
1
), pp.
235
238
.
123.
Xie
,
J.
, and
Tamaki
,
J.
,
2008
, “
An Experimental Study on Discharge Mediums Used for Electro-Contact Discharge Dressing of Metal-Bonded Diamond Grinding Wheel
,”
J. Mater. Process. Technol.
,
208
(1–3), pp.
239
244
.
124.
Xie
,
J.
,
Xua
,
J.
,
Tang
,
Y.
, and
Tamaki
,
J.
,
2008
, “
3D Graphical Evaluation of Micro-Scale Protrusion Topography of Diamond Grinding Wheel
,”
Int. J. Mach. Tools Manuf.
,
48
(
11
), pp.
1254
1260
.
125.
Cai
,
L. R.
,
Li
,
M.
,
Yang
,
H.
, and
Hu
,
D. J.
,
2012
, “
Electrical Discharge Dressing Metal-Bonded Diamond Grinding Wheels With Various Mediums
,”
Proc. Inst. Mech. Eng., Part B
,
227
(1), pp.
102
108
.
126.
Jia
,
Y.
,
Wei
,
C. J.
,
Kim
,
B. S.
,
Hu
,
D. J.
, and
Ni
,
J.
, 2009, “Feasibility Study on Near-Dry Electrical Discharge Dressing of Metal Bonded Diamond Grinding Wheels,”
ASME
Paper No. MSEC2009-84151.
127.
Wan
,
D. P.
,
Wang
,
Y.
, and
Hu
,
D. J.
,
2008
, “
In Situ Truing/Dressing of Diamond Wheel for Precision Grinding
,”
Chin. J. Mech. Eng.
,
21
(
3
), pp.
46
51
.
128.
Xie
,
J.
, and
Tamaki
,
J.
,
2006
, “
In-Process Evaluation of Grit Protrusion Feature for Fine Diamond Grinding Wheel by Means of Electro-Contact Discharge Dressing
,”
J. Mater. Process. Technol.
,
180
(
1–3
), pp.
83
90
.
129.
Wang
,
Y.
,
Zhou
,
X. J.
, and
Hu
,
D. J.
,
2006
, “
Study on Dry Electrical Discharge Assisted Profile Truing and Dressing of Diamond Wheel
,”
Key Eng. Mater.
,
315–316
, pp.
701
705
.
130.
Wang
,
Y.
,
Zhou
,
X. J.
, and
Hu
,
D. J.
,
2006
, “
An Experimental Investigation of Dry-Electrical Discharge Assisted Truing and Dressing of Metal Bonded Diamond Wheel
,”
Int. J. Mach. Tools Manuf.
,
46
(
3–4
), pp.
333
342
.
131.
Xie
,
J.
,
Liu
,
Y. J.
,
Tang
,
Y.
,
Kubo
,
A.
, and
Tamaki
,
J.
,
2009
, “
Ground Surface Integrity of Granite by Using Dry Electro-Contact Discharge Dressing of #600 Diamond Grinding Wheel
,”
J. Mater. Process. Technol.
,
209
(
18–19
), pp.
6004
6009
.
132.
Lu
,
Y. J.
,
Xie
,
J.
, and
Si
,
X. H.
,
2015
, “
Study on Micro-Topographical Removals of Diamond Grain and Metal Bond in Dry Electro-Contact Discharge Dressing of Coarse Diamond Grinding Wheel
,”
Int. J. Mach. Tools Manuf.
,
88
, pp.
118
130
.
133.
Wegener
,
K.
,
Weingartner
,
E.
, and
Blaser
,
M.
,
2013
, “
In-Process Wire Electrical Discharge Dressing (IWEDD) of Metal Bonded Diamond Wheels
,”
CIRP Ann. Manuf. Technol.
,
62
(
1
), pp.
339
342
.
134.
Weingartner
,
E.
,
Wegener
,
K.
, and
Kuster
,
F.
,
2012
, “
Applying Wire Electrical Discharge Dressing (WEDD) to Improve Grinding Performance of Metal Bounded Diamond Wheels
,”
Procedia CIRP
,
1
, pp.
365
370
.
135.
Rhoney
,
B. K.
,
Shih
,
A. J.
,
Scattergood
,
R. O.
,
Akemon
,
J. L.
,
Gust
,
D. J.
, and
Grant
,
M. B.
,
2002
, “
Wire Electrical Discharge Machining of Metal Bond Diamond Wheels for Ceramic Grinding
,”
Int. J. Mach. Tools Manuf.
,
42
(
12
), pp.
1355
1362
.
136.
Cai
,
L.-R.
,
Jia
,
Y.
, and
Hu
,
D.-J.
,
2009
, “
Dressing of Metal-Bonded Superabrasive Grinding Wheels by Means of Mist-Jetting Electrical Discharge Technology
,”
J. Mater. Process. Technol.
,
209
(
2
), pp.
779
784
.
137.
Xu
,
M. M.
,
Li
,
D. D.
,
Hu
,
D. J.
, and
Wang
,
Z. M.
,
2012
, “
Mist-Ietting Electrical Discharge Dressing (MEDD) of Nonmetal Bond Diamond Grinding Wheels Using Conductive Coating
,”
Int. J. Adv. Manuf. Technol.
,
63
(
9–12
), pp.
955
961
.
138.
Kramer
,
D.
,
Rehsteiner
,
F.
, and
Schumacher
,
B.
,
1999
, “
ECD(Electrochemical in-Process Controlled Dressing), a New Method for Grinding of Modern High-Performance Cutting Materials to Highest Quality
,”
CIRP Ann. Manuf. Technol.
,
48
(
1
), pp.
265
268
.
139.
Ohmori
,
H.
, and
Nakagawa
,
T.
,
1995
, “
Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID (Electrolytic In-Process Dressing) Grinding With Superfine Grain Metallic Bond Wheels
,”
CIRP Ann. Manuf. Technol.
,
44
(
1
), pp.
287
290
.
140.
Nebashi
,
N.
,
Wakabayashi
,
K.
,
Yamada
,
M.
, and
Masuzawa
,
T.
,
1998
, “
In-Process Trueing/Dressing of Grinding Wheels by WEDG and ELID
,”
Int. J. Electr. Mach.
,
3
, pp.
33
38
.
141.
Guo
,
B.
, and
Zhao
,
Q. L.
,
2015
, “
On-Machine Dry Electric Discharge Truing of Diamond Wheels for Micro-Structured Surfaces Grinding
,”
Int. J. Mach. Tools Manuf.
,
88
, pp.
62
70
.
142.
Chen
,
M. J.
,
Li
,
Z. A.
,
Yu
,
B.
,
Peng
,
H.
, and
Fang
,
Z.
,
2013
, “
On-Machine Precision Preparation and Dressing of Ball-Headed Diamond Wheel for the Grinding of Fused Silica
,”
Chin. J. Mech. Eng.
,
26
(
5
), pp.
982
987
.
143.
Ohmori
,
H.
, and
Nakagawa
,
T.
,
1990
, “
Mirror Surface Grinding of Silicon Wafers With Electrolytic In-Process Dressing
,”
CIRP Ann. Manuf. Technol.
,
39
(
1
), pp.
329
332
.
144.
Ohmori
,
H.
,
Takahashi
,
I.
, and
Bandyopadhyay
,
B. P.
,
1996
, “
Ultra-Precision Grinding of Structural Ceramics by Electrolytic In-Process Dressing (ELID) Grinding
,”
J. Mater. Process. Technol.
,
57
(
3–4
), pp.
272
277
.
145.
Zhang
,
C. H.
,
Ohmori
,
H.
, and
Li
,
W.
,
2000
, “
Small-Hole Machining of Ceramic Material With Electrolytic Interval-Dressing (ELID-II) Grinding
,”
J. Mater. Process. Technol.
,
105
(
3
), pp.
284
289
.
146.
Ohmori
,
H.
,
Li
,
W.
,
Makinouchi
,
A.
, and
Bandyopadhyay
,
B. P.
,
2000
, “
Efficient and Precision Grinding of Small Hard and Brittle Cylindrical Parts by the Centerless Grinding Process Combined With Electro-Discharge Truing and Electrolytic in-Process Dressing
,”
J. Mater. Process. Technol.
,
98
(
3
), pp.
322
327
.
147.
Saleh
,
T.
,
Biswas
,
I.
,
Lim
,
H. S.
, and
Rahman
,
M.
,
2008
, “
In-Process Truing of Metal-Bonded Diamond Wheel for Electrolytic In-Process Dressing (ELID) Grinding
,”
Int. J. Precis. Eng. Manuf.
,
9
(
3
), pp.
3
6
.http://www.dbpia.co.kr/Journal/ArticleDetail/NODE01013822
You do not currently have access to this content.