The main objective of the comparison of precision hard cutting and abrasive processes in terms of the surface texture is to facilitate the decision whether to possibly replace grinding operations by hard turning with low feed rates. In this study, hard turning operations with Cubic Boron Nitride (CBN) cutting tools and grinding operations using electrocorundum Al2O3 and CBN wheels were performed in order to generate surfaces with the Sa roughness parameter of about 0.2 μm. 3D roughness parameters and the frequency, fractal and motif characteristics were analyzed.
Possibilities of the Generation of Hardened Steel Parts With Defined Topographic Characteristics of the Machined Surfaces
Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received February 14, 2014; final manuscript received October 16, 2014; published online November 26, 2014. Assoc. Editor: Patrick Kwon.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Grzesik, W., and Żak, K. (February 1, 2015). "Possibilities of the Generation of Hardened Steel Parts With Defined Topographic Characteristics of the Machined Surfaces." ASME. J. Manuf. Sci. Eng. February 2015; 137(1): 014502. https://doi.org/10.1115/1.4028895
Download citation file:
- Ris (Zotero)
- Reference Manager