Shape memory alloys (SMAs) change their crystallographic structure and shape during heating/cooling and, as a consequence, their electrical resistance also changes. This allows the determination of the location of a SMA-based structure in space without separate sensors by suitably measuring this change. In this paper, this “self-sensing” concept is explored in SMA wire-type actuators. Step responses, expressed in terms of resistance (voltage drop) across the wire, and the corresponding displacement changes during heating/cooling, were measured. It was shown that the relationship between the displacement and the voltage drop can be approximated by a linear regression with a correlation coefficient close to 1. System identification has shown that SMA wire actuator performance can be best approximated by first or by second order system response depending on the thermal insulation condition of the actuator. The resolution and the sensitivity of the self-sensing method were evaluated based on experimental data and it was shown that their minimal values were less than $1.7μm$ and $0.7μm$, respectively, thus supporting the feasibility of the “self-sensing concept.” Both values exponentially increase with the increase in the range of the measured displacements whose magnitudes vary under different working conditions.

1.
Wuttig
,
M.
,
Quandt
,
E.
,
Ludwig
,
A.
, and
Winzek
,
B.
, 1999, “
Shape Memory and Magnetostrictive Materials for MEMS
,”
Materials Science of Microelectromechanical Systems (MEMS) Devices
, pp.
145
151
.
2.
Lee
,
H. J.
,
Lee
,
J. J.
,
Kwon
,
D. S.
, and
Yoon
,
Y. S.
, 2001, “
Neural Network Based Control of SMA Actuator for the Active Catheter
,”
HWRS-ERC Proceedings
, Vol.
2
(
2
), pp.
40
45
.
3.
Ehmann
,
K.
, and
Malukhin
,
K.
, 2005, “
Monolithic Shape Memory Alloy Based Micro/Meso Manipulator: Manufacturing and Material Characterization
,” submitted to
2005 Design, Service and Manufacturing Research and Grantees Conference
, Jan. 3–6, NSF.
4.
Duerig
,
T. W.
,
Melton
,
K. N.
,
Stockel
,
D.
, and
Wayman
,
C. M.
, 1990,
Engineering Aspects of Shape Memory Alloys
,
Butterworth-Heinemann
,
London
.
5.
Tohyama
,
O.
,
Maeda
,
S.
,
Abe
,
K.
, and
Murayama
,
M.
, 2001, “
Shape Memory Alloy Actuators and Their Reliability
,”
Proc. SPIE
0277-786X,
4592
, pp.
111
118
.
6.
Otsuka
,
K.
, and
Ren
,
X.
, 2002, “
Factors Affecting the Ms Temperature and Its Control in Shape-Memory Alloys
,”
Mater. Sci. Forum
0255-5476,
394–395
, pp.
177
184
.
7.
Ikuta
,
K.
, and
Tsukamoto
,
M.
, and
Hirose
,
S.
, 1988, “
Shape Memory Alloy Servo Actuator System With Electric Resistance Feedback and Application for Active Endoscopes
,”
Proceedings of the 1988 IEEE International Conference on Robotics and Automation
, Vol.
1
, pp.
427
430
.
8.
Lind
,
R. J.
,
Johnson
,
N.
, and
Doumanidis
,
C. C.
, 2000, “
Active Deformable Sheets: Prototype Implementation, Modeling, and Control
,”
Proc. SPIE
0277-786X,
3985
, pp.
572
582
.
9.
Lei
,
K. F.
, and
Yam
,
Y.
, 2000, “
Modeling and Experimentation of a Positioning System of SMA Wires
,”
Proc. SPIE
0277-786X,
3986
, pp.
208
219
.
10.
Wu
,
X. D.
,
Fan
,
Y. Z.
, and
Wu
,
J. S.
, 2000, “
A Study on the Variations of the Electrical Resistance for NiTi Shape Memory Alloy Wires During the Thermomechanical Loading
,”
Mater. Des.
0264-1275,
21
(
6
), pp.
511
515
.