The performance of three water-based grinding fluids was analyzed and compared to a neat oil tested under the same process conditions. Light optical and scanning electron microscopy observations show the mechanism of metal deposition that leads to CBN wheel failure for water-based fluids. To improve the performance of the water-based fluids, a new nozzle layout is proposed that would prevent metal deposition on the CBN wheels. The proposed solution is not chemical, but mechanical in nature and the presented setting should be optimized in the future to assure satisfactory performance of the CBN wheels with water-based fluids.
Fluid Performance Study for Groove Grinding a Nickel-Based Superalloy Using Electroplated Cubic Boron Nitride (CBN) Grinding Wheels
Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received August 2003; Revised November 2003. Associate Editor: T. R. Kurfess.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Gift, , F. C., and Misiolek, W. Z. (September 7, 2004). "Fluid Performance Study for Groove Grinding a Nickel-Based Superalloy Using Electroplated Cubic Boron Nitride (CBN) Grinding Wheels ." ASME. J. Manuf. Sci. Eng. August 2004; 126(3): 451–458. https://doi.org/10.1115/1.1763181
Download citation file:
- Ris (Zotero)
- Reference Manager