By viewing the topside of a weld pool, a skilled operator can estimate the weld joint penetration. The weld pool shape or the solidified bead shape is crucial for weld quality. Automatic control of pulsed GTAW with wire filler is achieved by recording the image of the weld pool with an optical sensing method and then calculating shape parameters with an image processing algorithm. Three-dimensional shape parameters of the weld pool were determined that uniquely and accurately describe various weld pool shapes. Two-dimensional shape parameters were extracted from a two-dimensional image processing algorithm. Finally, a shape from shading (SFS) algorithm on a single image was used to recover the surface height from a single weld pool image. The extracted three-dimensional parameters for the weld pool surface were verified and used for double-sided shape control.
Extraction of Three-Dimensional Parameters for Weld Pool Surface in Pulsed GTAW With Wire Filler
Contributed by the Manufacturing Engineering Division for publication in the JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING. Manuscript received Oct. 2001; Revised July 2002. Associate Editor: S. G. Kapoor.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Zhao, D. B., Yi , J. Q., Chen, S. B., Wu, L., and Chen, Q. (July 23, 2003). "Extraction of Three-Dimensional Parameters for Weld Pool Surface in Pulsed GTAW With Wire Filler ." ASME. J. Manuf. Sci. Eng. August 2003; 125(3): 493–503. https://doi.org/10.1115/1.1556400
Download citation file:
- Ris (Zotero)
- Reference Manager