A new approach for the Finite Element modelling of the hydromechanical deep drawing process is evaluated. In the model a Finite Difference approximation of Reynold’s equation is solved for the fluid flow between the blank and the draw die in the flange region. The approach is implemented as a contact algorithm in an explicit Finite Element code, Exhale2D. The developed model is verified against experiments and good agreement is obtained. It is concluded that the developed model is a promising approach for simulating the hydromechanical deep drawing process using the Finite Element Method.
Issue Section:
Technical Papers
1.
Kasuga
, Y.
, and Tsutsumi
, S.
, 1965
, “Pressure Lubricated Deep Drawing (Conclusion)
,” Bull. JSME
, 8
, No. 29
, 120
–131
.2.
Buerk, E., 1967, “Hydromechanical Deep Drawing,” Sheet Metal Industries, March, pp. 182–188.
3.
Herold
, U.
, 1981
, “Bestimmung des Eigenspannungszustandes herkommlich und hydromechanisch tiefgezogener Werkstucke
,” Industrie Anzeiger
,23.9
, No. 77
, pp. 22
–23
.4.
Nakagawa, T., Nakamura, K., and Amino, H., 1996, “Various Applications of Hydraulic Counter-pressure Deep Drawing,” Int. Conf. on Sheet Metal Forming Technology, Ohio, pp. 1–17.
5.
Nakagawa
, T.
, Nakamura
, K.
, and Amino
, H.
, 1997
, “Various Applications of Hydraulic Counter-Pressure Deep Drawing
,” J. Mater. Process. Technol.
, 71
, pp. 160
–167
.6.
Amino
, H.
, Nakamura
, K.
, and Nakagawa
, T.
, 1990
, “Counter-pressure Deep Drawing and Its Application in the Forming of Automobile Parts
,” J. Mater. Process. Technol.
, 23
, pp. 243
–265
.7.
Andersen, J. C. F., 1994, “Hydromechanical Forming of High Strength Sheet Steels”. PhD thesis, Department of Production, Aalborg University, Denmark (in Danish).
8.
Olovsson, L., 1998, “Finite Element Simulation of Metal Cutting Operations,” Technical Report, Department of Solid Mechanics, Linko¨ping University, ISBN 91-7219-143-0.
9.
Jensen, M. R., and Olovsson, L., 1998d, “Finite Element Simulation of the Hydromechanical Deep Drawing Process using Exhale2D,” Department of Production 1998, Publication No. 1998F-04.
10.
Yang
, D. Y.
, Kim
, J. B.
, and Lee
, D. W.
, 1995
, “Investigation into Manufacturing of Very Long Cups by Hydromechanical Deep Drawing and Ironing with Controlled Radial Pressure
,” Annals of the CIRP
, 44
, No. 1
, pp. 255
–258
.11.
Gelin, J. C., and Delassus, P., 1996, “Modelling and Optimal Control of Process Parameters in the Aquadraw Deep Drawing Process,” Proceedings, 5th Int. Conf. on Plasticity, Ohio, 2, pp. 831–834.
12.
An, J., and Soni, A. H., 1996, “Three dimensional Computer Simulation of a Sheet Metal Hydroforming Process,” Proceedings, 5th Int. Conf. on Plasticity, Ohio 2, pp. 827–830.
13.
Moshfegh, R., Jensen, M. R., Nilsson, L., and Danckert, J., 1998, “Finite Element Simulation of the Hydromechanical Deep Drawing Process,” First ESAFORM Conference on Metal Forming, Sophia-Antipolis, 17–20 March, pp. 203–206.
14.
Nielsen, K. B., Jensen, M. R., and Danckert, J., 1998, “Automatic Process Layout for the Aquadraw Process,” 19th Riso̸ International Symposium on Materials Science, 7–11 September, Risø, pp. 391–397.
15.
Jensen, M. R., Olovsson, L., and Danckert, J., 1998c, “Numerical Model for the Oil Pressure Distribution in the Hydromechanical Deep Drawing Process,” Sheet Metal 1998, 6th International Conference, University of Twente, The Netherlands, 6–8 April, I, pp. 247–256.
16.
Miyauchi, K., Furubayashi, T., Herai, T., and Sudo, C., 1978, “Galling Behavior and Its Tests in Press Forming of Autobody Parts,” 10th Int. Congress IDDRG, pp. 287–296.
17.
Jensen
, M. R.
, Damborg
, F. F.
, Nielsen
, K. B.
, and Danckert
, J.
, 1998a
, “Applying the Finite-Element Method for Determination of Tool Wear in Conventional Deep Drawing
,” J. Mater. Process. Technol.
, 83
, Nos. 1-3
, pp. 98
–105
.18.
Jensen
, M. R.
, Damborg
, F. F.
, Nielsen
, K. B.
, and Danckert
, J.
, 1998b
, “Optimization of the Draw-Die Design in Conventional Deep Drawing in Order to Minimize Tool Wear
,” J. Mater. Process. Technol.
, 83
, Nos. 1-3
, pp. 106
–114
.Copyright © 2001
by ASME
You do not currently have access to this content.