An analytical prediction of stability lobes for milling cutters with variable pitch angles is presented. The method requires cutting constants, number of teeth, and transfer function of cutter mounted on the machine tool as inputs to a chatter stability expression. The stability is formulated by transforming time varying directional cutting constants into time invariant constants. Constant regenerative time delay in uniform cutters is transformed into nonuniform multiple regenerative time delay for variable pitch cutters. The chatter free axial depth of cut is solved from the eigenvalues of stability expression, whereas the spindle speed is identified from regenerative phase delays. The proposed technique has been verified with extensive cutting tests and time domain simulations. The practical use of the analytical solution is demonstrated by an optimal tooth spacing design application which increases the chatter free depth of cuts significantly.

1.
Altıntas¸
Y.
, and
Budak
E.
,
1995
a, “
Analytical Prediction of Stability Lobes in Milling
,”
Annals of CIRP
, Vol.
44
, No.
1
, pp.
357
362
.
2.
Altıntas¸
Y.
, and
Chan
P. K.
,
1992
, “
In Process Detection and Suppression of Chatter in Milling
,”
International Journal Machine Tools and Manufacture
, Vol.
32
, No.
3
, pp.
329
347
.
3.
Altıntas¸
Y.
, and
Lee
P.
,
1996
a, “
A General Mechanics and Dynamics Model for Helical End Mills
,”
Annals of the CIRP
, Vol.
45
, pp.
59
64
.
4.
Altıntas¸, Y., Shamoto, E., Lee, P., and Budak, E., 1996b, “Analytical Prediction of Stability Lobes in Ball end Milling,” ASME 1996 Winter Annual Meeting, Symposium: The Physics of Machining Processes III, Publication of TMS, ISBN 0-87339-345-7, pp. 151–167.
5.
Budak, E., and Altıntas¸, Y., 1995b, “Analytical Prediction of Chatter Stability in Milling. Part I: General formulation, Part II: Application of the general formulation to common milling system,” Proceedings of the ASME Dynamic Systems and Control Division, Vol. 57, No. 1, pp. 545–565.
6.
Doolan, P., Phadke, M. S., and Wu, S., 1975, “Computer Design of Vibration Free Face Milling Cutters,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, pp. 925–930.
7.
Minis
I.
, and
Yanushevsky
R.
,
1993
, “
New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
115
, No.
1
, pp.
1
8
.
8.
Montgomery
D.
, and
Altıntas¸
Y.
,
1991
, “
Mechanism of Cutting Force and Surface Generation in Dynamic Milling
,”
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, Vol.
113
, pp.
160
168
.
9.
Radulescu, R., Kapoor, S. G., and DeVor, R. E., 1993, “Investigation of Variable Spindle Speed Face Milling for Tool-work Structures with Complex Dynamics: Part I—Simulation results, Part II—Physical explanation,” ASME Publication PED, Vol. 64, pp. 603–627.
10.
Shirase
K.
, and
Altıntas¸
Y.
,
1995
, “
Cutting Force and Dimensional Surface Error Generation in Peripheral Milling with Variable Pitch Helical End Mills
,”
Int. J. Mach. Tools Manufact.
, Vol.
36
, No.
5
, pp.
567
584
.
11.
Slavicek, J., 1965, “The Effect of Irregular Tooth Pitch on Stability of Milling,” in Proceedings of the 6th MTDR Conference, Pergamon Prees, London, pp. 15–22.
12.
Smith
S.
, and
Tlusty
J.
,
1993
, “
Efficient Simulation Programs for Chatter in Milling
,”
Annals of the CIRP
, Vol.
42
, No.
1
, pp.
463
466
.
13.
Stone, B. J., 1970, “The Effect on The Chatter Behavior of Cutters With Different Helix Angles on Adjacent Teeth,” Advances in Machine Tool Design and Research, Proceedings of the 11th International MTDR Conference University of Birmingham, Vol. A, pp. 169–180.
14.
Tlusty, J., 1965, “A Method of Analysis of Machine Tool Stability,” Proceedings MTDR, pp. 5–14.
15.
Tlusty, J., Ismail, F., and Zaton, W., 1983, “Use of Special Milling Cutters Against Chatter,” NAMRC 11, University of Wisconsin—Madison, SME, pp. 408–415.
16.
Tobias, S. A., 1965, Machine Tool Vibration, Blackie and Sons Ltd.
17.
Vanherck, P., 1967, “Increasing Milling Machine Productivity by Use of Cutter with Non-Constant Edge Pitch,” Proceedings of the 6th MTDR Conference, Vol. 9, pp. 947–960.
18.
Varterasian, J. H., 1971, White Noise: A Deterrent to Milling Cutter Chatter, Manufacturing Engineering and Management.
This content is only available via PDF.
You do not currently have access to this content.