Volumes | International Conference on Leading Edge Manufacturing/Materials and Processing | American Society of Mechanical Engineers Digital Collection

Topics: Molding , Nozzles , Real-time control , Materials properties , Additive manufacturing , Metals , Modeling , Cladding systems (Building) , Errors , Flow (Dynamics)

Machine Tool Technologies

Calibration and Compensation of Rotary Axis Angular Positioning Deviations on a SCARA-Type Industrial Robot Using a Laser Tracker

Nan Zhao, Soichi Ibaraki

LEMP 2020; V001T02A001doi:https://doi.org/10.1115/LEMP2020-8502

Abstract

View Articletitled, Calibration and Compensation of Rotary Axis Angular Positioning Deviations on a SCARA-Type Industrial Robot Using a Laser Tracker

PDF

Topics: Calibration , Kinematics , Lasers , Robots

Effects of Position and Orientation Errors of Linear and Rotary Axis Average Lines of Five-Axis Controlled Machining Centre Onto its Motion Errors in Testing Method With Truncated Square Pyramid

Koichi Kikkawa, Naoki Mori, Yoshio Mizugaki, Keisuke Ozaki

LEMP 2020; V001T02A002doi:https://doi.org/10.1115/LEMP2020-8504

Abstract

View Articletitled, Effects of Position and Orientation Errors of Linear and Rotary Axis Average Lines of Five-Axis Controlled Machining Centre Onto its Motion Errors in Testing Method With Truncated Square Pyramid

PDF

Topics: Errors , Machine tools , Machining , Testing

Study on Non-Axisymmetric 3D Curved Surface Turning by Driven-Type Rotary Tool Synchronized With Spindle

Akane Ishizuka, Kensuke Nakagawa, Yoshitaka Morimoto, Akio Hayashi, Yoshiyuki Kaneko, Naohiko Suzuki, Ryo Hirono

LEMP 2020; V001T02A003doi:https://doi.org/10.1115/LEMP2020-8505

Abstract

View Articletitled, Study on Non-Axisymmetric 3D Curved Surface Turning by Driven-Type Rotary Tool Synchronized With Spindle

PDF

Topics: Linear motors , Turning , Machining , Rotation , Automobiles , Hybrid electric vehicles , Internal combustion engines , Shapes , Valves , Carbon dioxide

Evaluation of Contacting Effect Between Tool and Workpiece on Vibration Characteristics of NC Machine Tools

Taisuke Hokazono, Ryuta Sato, Isamu Nishida, Keiichi Shirase

LEMP 2020; V001T02A004doi:https://doi.org/10.1115/LEMP2020-8518

Abstract

View Articletitled, Evaluation of Contacting Effect Between Tool and Workpiece on Vibration Characteristics of NC Machine Tools

PDF

Topics: Machine tools , Vibration

Experimental Analysis of the Power Consumption of Feed Drive Systems Driven by Ball-Screw

Massimiliano Rigacci, Ryuta Sato, Keiichi Shirase

LEMP 2020; V001T02A005doi:https://doi.org/10.1115/LEMP2020-8523

Abstract

View Articletitled, Experimental Analysis of the Power Consumption of Feed Drive Systems Driven by Ball-Screw

PDF

Topics: Energy consumption , Experimental analysis , Screws

Study on Method to Avoid Chatter Vibration Based on Machine Tool Rigidity

Akio Hayashi, Hiroto Ishibashi, Yoshitaka Morimoto, Yoshiyuki Kaneko, Naohiko Suzuki

LEMP 2020; V001T02A006doi:https://doi.org/10.1115/LEMP2020-8533

Abstract

View Articletitled, Study on Method to Avoid Chatter Vibration Based on Machine Tool Rigidity

PDF

Topics: Chatter , Machine tools , Stability , Stiffness , Vibration

Smooth Path Blending for 5-Axis Machine Tools

Shingo Tajima, Burak Sencer, Hayato Yoshioka, Hidenori Shinno

LEMP 2020; V001T02A007doi:https://doi.org/10.1115/LEMP2020-8536

Abstract

View Articletitled, Smooth Path Blending for 5-Axis Machine Tools

PDF

Topics: Algorithms , Computer-aided design , Corners (Structural elements) , Cycles , Errors , Filtration , Impellers , Impulse (Physics) , Interpolation , Jet engines

Investigation of Cutting Force in Screw Cutting by Three Axis Controlling Helical Interpolate With a Wireless Communication Tool Holder System

Shota Matsui, Nobutoshi Ozaki, Toshiki Hirogaki, Eiichi Aoyama, Ryo Matsuda

LEMP 2020; V001T02A008doi:https://doi.org/10.1115/LEMP2020-8540

Abstract

View Articletitled, Investigation of Cutting Force in Screw Cutting by Three Axis Controlling Helical Interpolate With a Wireless Communication Tool Holder System

PDF

Topics: Cutting , Screws , Machining , Interpolation , Thread , Machine tools , Computer numerical control machine tools , Control systems , Dynamometers , Machining centers

Error Analysis by Square 3 x 3 Machining Method for Five-Axis Machining Centers

Shigehiko Sakamoto, Atsushi Yokoyama, Kazumasa Nakayasu, Toshihiro Suzuki, Shinji Koike

LEMP 2020; V001T02A009doi:https://doi.org/10.1115/LEMP2020-8545

Abstract

View Articletitled, Error Analysis by Square 3 x 3 Machining Method for Five-Axis Machining Centers

PDF

Topics: Error analysis , Errors , Machining , Machining centers

Machining Vibration Suppression of a Cylindrical Part by a Point-Contact Support

Atsushi Matsubara, Kotaro Mori, Daisuke Kono

LEMP 2020; V001T02A010doi:https://doi.org/10.1115/LEMP2020-8550

Abstract

View Articletitled, Machining Vibration Suppression of a Cylindrical Part by a Point-Contact Support

PDF

Topics: Aircraft engines , Chatter , Cutting , Cylinders , Dampers , Design , Excitation , Fixturing , Frequency response , Fuel consumption

Improvement of Thermal Deformation in a Newly Developed Steel CFRP Composite Ball Screw

Hayato Yoshioka, Shunya Saito, Jun Kato, Hidenori Shinno, Shunsuke Goto, Nobumitsu Hori

LEMP 2020; V001T02A011doi:https://doi.org/10.1115/LEMP2020-8587

Abstract

View Articletitled, Improvement of Thermal Deformation in a Newly Developed Steel CFRP Composite Ball Screw

PDF

Topics: Carbon reinforced plastics , Composite materials , Screws , Steel , Thermal deformation

Development of a Machining Center Structure Made of Carbon Fiber Reinforced Plastic and Aluminum Honeycomb

Toru Kizaki, Masatoshi Iwama, Masaru Shiraishi, Naohiko Sugita

LEMP 2020; V001T02A012doi:https://doi.org/10.1115/LEMP2020-8599

Abstract

View Articletitled, Development of a Machining Center Structure Made of Carbon Fiber Reinforced Plastic and Aluminum Honeycomb

PDF

Topics: Aluminum , Carbon reinforced plastics , Honeycomb structures , Machining centers

Machining Processes

Effect of Steady Rest in Cylindrical Traverse Grinding of Slender Workpiece

Hidetaka Fujii, Takashi Onishi, Chinhu Lin, Moriaki Sakakura, Kazuhito Ohashi

LEMP 2020; V001T03A001doi:https://doi.org/10.1115/LEMP2020-8507

Abstract

View Articletitled, Effect of Steady Rest in Cylindrical Traverse Grinding of Slender Workpiece

PDF

Topics: Deformation , Grinding

Investigation of Crystallographic Aspects of Subsurface Damage Induced by Grinding Using Micro-Raman Tomographic Imaging

Teppei Onuki, Shunsuke Kan, Wangpiao Lin, Wentong Lu, Kousuke Hasegawa, Hirotaka Ojima, Jun Shimizu, Libo Zhou

LEMP 2020; V001T03A002doi:https://doi.org/10.1115/LEMP2020-8514

Abstract

View Articletitled, Investigation of Crystallographic Aspects of Subsurface Damage Induced by Grinding Using Micro-Raman Tomographic Imaging

PDF

Topics: Damage , Grinding , Imaging , Sapphire

Achieving Highly Stable Removal Rate in Small Tool Polishing of Glass Lenses

Urara Satake, Toshiyuki Enomoto, Teppei Miyagawa, Takuya Ohsumi

LEMP 2020; V001T03A003doi:https://doi.org/10.1115/LEMP2020-8517

Abstract

View Articletitled, Achieving Highly Stable Removal Rate in Small Tool Polishing of Glass Lenses

PDF

Topics: Glass , Polishing

High-Speed Machining of Ti-6Al-4V With a Micro Textured Cutting Tool Focusing on Coolant Behaviors

Mitsuru Hasegawa, Tatsuya Sugihara

LEMP 2020; V001T03A004doi:https://doi.org/10.1115/LEMP2020-8531

Abstract

View Articletitled, High-Speed Machining of Ti-6Al-4V With a Micro Textured Cutting Tool Focusing on Coolant Behaviors

PDF

Topics: Coolants , Cutting tools , Machining , Texture (Materials) , Wear

Effect of Al Content of TiAlN Coating on Cutting Performance in Driven Rotary Cutting of Hardened Steel

Hiroyuki Sakai, Hideharu Kato, Taira Yoshikawa, Kazuyuki Kubota

LEMP 2020; V001T03A005doi:https://doi.org/10.1115/LEMP2020-8532

Abstract

View Articletitled, Effect of Al Content of TiAlN Coating on Cutting Performance in Driven Rotary Cutting of Hardened Steel

PDF

Topics: Coating processes , Coatings , Cutting , Martensitic steel

Performance Evaluation of White Coconut Oil Based Metal Working Fluid (MWF) Under Minimum Quantity Lubrication (MQL) for Machining of Inconel 718 and AISI 304

K. C. Wickramasinghe, Hiroyuki Sasahara, Usui Masatoshi

LEMP 2020; V001T03A006doi:https://doi.org/10.1115/LEMP2020-8535

Abstract

View Articletitled, Performance Evaluation of White Coconut Oil Based Metal Working Fluid (MWF) Under Minimum Quantity Lubrication (MQL) for Machining of Inconel 718 and AISI 304

PDF

Topics: Fluids , Lubrication , Machining , Metalworking , Performance evaluation

Influence of Tool Path When Groove Shape Machining Using Ceramic End Mill on Tool Cutting Edge

Masanobu Hasegawa, Kohei Ichikawa

LEMP 2020; V001T03A007doi:https://doi.org/10.1115/LEMP2020-8547

Abstract

View Articletitled, Influence of Tool Path When Groove Shape Machining Using Ceramic End Mill on Tool Cutting Edge

PDF

Topics: Ceramics , Cutting , Machining , Shapes , Superalloys

Effects of the Size of Built-Up Layer on the Wear of Uncoated Cemented Carbide Tools in Dry Cutting of SUS304 Stainless Steel

Xiaoqi Song, Yukio Takahashi, Tohru Ihara, Weiming He

LEMP 2020; V001T03A008doi:https://doi.org/10.1115/LEMP2020-8549

Abstract

View Articletitled, Effects of the Size of Built-Up Layer on the Wear of Uncoated Cemented Carbide Tools in Dry Cutting of SUS304 Stainless Steel

PDF

Topics: Carbide cutting tools , Cutting , Stainless steel , Wear

Study on Polishing Method Using Double Magnet System by Superconductive Assisted Machining Method

Keisuke Suzuki, Tatsuya Nakasaki, Hidetaka Nakashima, Panart Kajornrunruan, Misaki Onomata, Yushi Kinoshita, Ruizhe Zhang, Edmund Soji Otabe

LEMP 2020; V001T03A009doi:https://doi.org/10.1115/LEMP2020-8553

Abstract

View Articletitled, Study on Polishing Method Using Double Magnet System by Superconductive Assisted Machining Method

PDF

Topics: Grinding , Machining , Magnets , Polishing

Chatter Stability Prediction of Cutting Process With Process Damping Utilizing Finite Element Analysis

Norikazu Suzuki, Tomoki Nakanomiya, Eiji Shamoto

LEMP 2020; V001T03A010doi:https://doi.org/10.1115/LEMP2020-8556

Abstract

View Articletitled, Chatter Stability Prediction of Cutting Process With Process Damping Utilizing Finite Element Analysis

PDF

Topics: Chatter , Cutting , Damping , Finite element analysis , Stability

Removal Machining Performances by Using Inert Gas Filled Micro Bubble Coolant

Manabu Iwai, Ryouta Yamashita, Satoshi Anzai, Shinichi Ninomiya

LEMP 2020; V001T03A011doi:https://doi.org/10.1115/LEMP2020-8558

Abstract

View Articletitled, Removal Machining Performances by Using Inert Gas Filled Micro Bubble Coolant

PDF

Topics: Coolants , Grinding , Machining , Microbubbles

Lubrication Effect of Smeared Oil on Workpiece Surface in Intermittent Cutting With Very Short Cutting Duration

Yoshiki Nakamura, Fumihiro Itoigawa, Shinya Hayakawa, Satoru Maegawa, Xiaoxu Liu

LEMP 2020; V001T03A012doi:https://doi.org/10.1115/LEMP2020-8562

Abstract

View Articletitled, Lubrication Effect of Smeared Oil on Workpiece Surface in Intermittent Cutting With Very Short Cutting Duration

PDF

Topics: Cutting , Lubricants , Lubrication , Milling , Titanium alloys , Temperature , Heat , Machining , Blades , Damage

Investigation of Correlation Between Process Energy Balance and Phase Shift Variation of Chatter Vibration in Spindle Speed Variation

Shuntaro Yamato, Hirohiko Matsuzaki, Takamichi Ito, Yasuhiro Kakinuma

LEMP 2020; V001T03A013doi:https://doi.org/10.1115/LEMP2020-8565

Abstract

View Articletitled, Investigation of Correlation Between Process Energy Balance and Phase Shift Variation of Chatter Vibration in Spindle Speed Variation

PDF

Topics: Chatter , Energy budget (Physics) , Phase shift , Vibration

Effect of Cutting Temperature on Phase Transformation in Cutting of NiTi Alloy

Hao Yang, Katsuhiko Sakai, Hiroo Shizuka, Kunio Hayakawa, Tetsuo Nagare

LEMP 2020; V001T03A014doi:https://doi.org/10.1115/LEMP2020-8566

Abstract

View Articletitled, Effect of Cutting Temperature on Phase Transformation in Cutting of NiTi Alloy

PDF

Topics: Cutting , Nickel titanium alloys , Phase transitions , Temperature

Effects of Alpha-Cellulose Supply on the Working Life of MCF Slurry in MCF Polishing

Yuta Nonaka, Mitsuyoshi Nomura, Tatsuya Fujii, Tsunehisa Suzuki, Yongbo Wu

LEMP 2020; V001T03A015doi:https://doi.org/10.1115/LEMP2020-8568

Abstract

View Articletitled, Effects of Alpha-Cellulose Supply on the Working Life of MCF Slurry in MCF Polishing

PDF

Topics: Fluids , Polishing , Slurries

Effects of Cold Air Supply on Cutting Characteristics in Small Hole Drilling of PEEK

Shogo Ito, Mitsuyoshi Nomura, Tatsuya Fujii, Tsunehisa Suzuki

LEMP 2020; V001T03A016doi:https://doi.org/10.1115/LEMP2020-8569

Abstract

View Articletitled, Effects of Cold Air Supply on Cutting Characteristics in Small Hole Drilling of PEEK

PDF

Topics: Cooling , Cutting , Drilling , Heat

On-Machine Estimation of Workpiece Deformation for Thin-Walled Parts Considering Fixture Clamping Sequence

Jingkai Zeng, Koji Teramoto, Dongjin Wu, Hiroki Matsumoto

LEMP 2020; V001T03A017doi:https://doi.org/10.1115/LEMP2020-8570

Abstract

View Articletitled, On-Machine Estimation of Workpiece Deformation for Thin-Walled Parts Considering Fixture Clamping Sequence

PDF

Topics: Deformation , Machinery , Machining

Investigation of Orthogonal Turn-Milling for Higher Machining Efficiency and Accuracy: Relationship Between Material Removal Rate and Measured Tool Flank Temperature

Koji Shimanuki, Akira Hosokawa, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto

LEMP 2020; V001T03A018doi:https://doi.org/10.1115/LEMP2020-8573

Abstract

View Articletitled, Investigation of Orthogonal Turn-Milling for Higher Machining Efficiency and Accuracy: Relationship Between Material Removal Rate and Measured Tool Flank Temperature

PDF

Topics: Cutting , Geometry , Machining , Milling , Pyrometers , Temperature

Monitoring of Tool Wear Distribution With Cutting Force Measurement in Drilling

Shoichi Tamura, Kodai Sekigawa, Takashi Matsumura

LEMP 2020; V001T03A019doi:https://doi.org/10.1115/LEMP2020-8574

Abstract

View Articletitled, Monitoring of Tool Wear Distribution With Cutting Force Measurement in Drilling

PDF

Topics: Cutting , Drilling , Force measurement , Wear

Surface Roughness Analysis for Radius End Mill in Cross Feed Direction Both Contour and Scanning Line Machinings

Hirohisa Narita

LEMP 2020; V001T03A020doi:https://doi.org/10.1115/LEMP2020-8575

Abstract

View Articletitled, Surface Roughness Analysis for Radius End Mill in Cross Feed Direction Both Contour and Scanning Line Machinings

PDF

Topics: Machining , Surface roughness , Taguchi methods , Corners (Structural elements) , Cutting , Milling , Shapes

Micro Grooving of Cemented Carbide Using PCD Blade

Keishi Yamaguchi, Takumi Sugimoto, Minoru Ota, Kai Egashira

LEMP 2020; V001T03A021doi:https://doi.org/10.1115/LEMP2020-8579

Abstract

View Articletitled, Micro Grooving of Cemented Carbide Using PCD Blade

PDF

Topics: Blades , Machine tools , Statistical process control , Manufacturing , Wear , Wire , Bearings , Disks , Electrical discharge machining , Electrodes

Analysis of the Effect of Machining Sequence on Machining Error Considering Workpiece Rigidity Change

Yutaro Nakao, Koji Teramoto

LEMP 2020; V001T03A022doi:https://doi.org/10.1115/LEMP2020-8581

Abstract

View Articletitled, Analysis of the Effect of Machining Sequence on Machining Error Considering Workpiece Rigidity Change

PDF

Topics: Errors , Machinery , Machining , Stiffness

Measurement of Rake Face Temperature in Cryogenic Machining of Titanium Alloy

Masahiko Sato, Masashi Kamoto

LEMP 2020; V001T03A023doi:https://doi.org/10.1115/LEMP2020-8582

Abstract

View Articletitled, Measurement of Rake Face Temperature in Cryogenic Machining of Titanium Alloy

PDF

Topics: Cutting , Machining , Temperature , Titanium alloys

Basic Study on Polishing Technology for Microcavity With Electrically Controlled Slurry

Yuka Hayama, Yasuhiro Kakinuma

LEMP 2020; V001T03A024doi:https://doi.org/10.1115/LEMP2020-8586

Abstract

View Articletitled, Basic Study on Polishing Technology for Microcavity With Electrically Controlled Slurry

PDF

Topics: Polishing , Slurries

Improvement of the Form Accuracy Ground by a Slender Wheel in Internal Grinding

Takashi Onishi, Yusuke Nakabayashi, Moriaki Sakakura, Go Ichiba, Kazuhito Ohashi

LEMP 2020; V001T03A025doi:https://doi.org/10.1115/LEMP2020-8595

Abstract

View Articletitled, Improvement of the Form Accuracy Ground by a Slender Wheel in Internal Grinding

PDF

Topics: Deformation , Errors , Grinding , Wheels

Thin Film Stress Sensor on the Tool Rake Face for Orthogonal Cutting

Toshiyuki Obikawa, Kenji Yagi, Mamoru Hayashi

LEMP 2020; V001T03A026doi:https://doi.org/10.1115/LEMP2020-8596

Abstract

View Articletitled, Thin Film Stress Sensor on the Tool Rake Face for Orthogonal Cutting

PDF

Topics: Cutting , Sensors , Stress , Thin films

Proposing a New Evaluation Method in Si Wafer Rotary Grinding

Jumpei Kusuyama, Bima Kawase, Yohichi Nakao, Masaki Kanazawa, Kazumasa Ishikawa

LEMP 2020; V001T03A027doi:https://doi.org/10.1115/LEMP2020-8601

Abstract

View Articletitled, Proposing a New Evaluation Method in Si Wafer Rotary Grinding

PDF

Topics: Evaluation methods , Grinding , Semiconductor wafers , Surface roughness

Development of the cBN Electroplated End-Mill for High Precision Machining of CFRP

Shinnosuke Yamashita, Tatsuya Furuki, Hiroyuki Kousaka, Toshiki Hirogaki, Eiichi Aoyama, Kiyofumi Inaba, Kazuna Fujiwara

LEMP 2020; V001T03A028doi:https://doi.org/10.1115/LEMP2020-8604

Abstract

View Articletitled, Development of the cBN Electroplated End-Mill for High Precision Machining of CFRP

PDF

Topics: Carbon reinforced plastics , Cutting , Grinding , Machining

Visualization of Dynamically Changing Cutting Force Under Ultrasonic Cutting Condition

Hiromi Isobe, Masataka Okuda, Keisuke Hara, Akira Sakurada, Jun Ishimatsu

LEMP 2020; V001T03A029doi:https://doi.org/10.1115/LEMP2020-8606

Abstract

View Articletitled, Visualization of Dynamically Changing Cutting Force Under Ultrasonic Cutting Condition

PDF

Topics: Cutting , Visualization , Vibration , Stress concentration , Cutting tools , Dynamometers , Electromagnetic spectrum , Emissions , Flames , Imaging

Manufacturing Systems

A Hybrid Meta-Heuristic Approach Considering Workload Balancing for Vehicle Assignment and Routing Problem

Takuma Kawashima, Tatsuhiko Sakaguchi, Naoki Uchiyama

LEMP 2020; V001T04A001doi:https://doi.org/10.1115/LEMP2020-8510

Abstract

View Articletitled, A Hybrid Meta-Heuristic Approach Considering Workload Balancing for Vehicle Assignment and Routing Problem

PDF

Topics: Vehicles , Trucks , Logistics , Algorithms , Simulated annealing , E-commerce , Manufacturing , Optimization , Waste handling

Graph-Based Feature Recognition and Combination Method for Automatic Process Planning System

Da Xie, Jiang Zhu, Tomohisa Tanaka

LEMP 2020; V001T04A002doi:https://doi.org/10.1115/LEMP2020-8516

Abstract

View Articletitled, Graph-Based Feature Recognition and Combination Method for Automatic Process Planning System

PDF

Topics: Manufacturing , Production planning , Machining , Computer-aided design , Computer-aided engineering , Computer-aided manufacturing , Raw materials , Shapes

Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surface Using Barrel Tool: Control of Contact Point on Cutting Edge

Tomonobu Suzuki, Koichi Morishige

LEMP 2020; V001T04A003doi:https://doi.org/10.1115/LEMP2020-8539

Abstract

View Articletitled, Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surface Using Barrel Tool: Control of Contact Point on Cutting Edge

PDF

Topics: Cutting , Machining

Proposal of a Tool Path Generation Method to Ensure Workpiece Stiffness for Efficient Rough Machining

Maho Kumanotani, Hitoshi Kusino, Keiichi Nakamoto

LEMP 2020; V001T04A004doi:https://doi.org/10.1115/LEMP2020-8543

Abstract

View Articletitled, Proposal of a Tool Path Generation Method to Ensure Workpiece Stiffness for Efficient Rough Machining

PDF

Topics: Machining , Optimization , Shapes , Stiffness , Surface roughness , Topology , Design , Aircraft , Biomedicine , Computer software

Development of Tool Path Generation Method for Complex Deep Groove Shape With Simultaneous 4-Axis Machining

Kohei Ichikawa, Takayuki Nakamura, Jun'ichi Kaneko, Masanobu Hasegawa, Takeyuki Abe

LEMP 2020; V001T04A005doi:https://doi.org/10.1115/LEMP2020-8563

Abstract

View Articletitled, Development of Tool Path Generation Method for Complex Deep Groove Shape With Simultaneous 4-Axis Machining

PDF

Topics: Machine tools , Machining , Shapes , Collisions (Physics) , Aircraft engines , Algorithms , Computer software , Computer-aided manufacturing , Countermeasures , Weight (Mass)

Tool Posture Planning Method for Low Rigidity Workpiece Considering Elastic Deformation Caused by Cutting Force

Jun'ichi Kaneko, Yuki Okuma, Shumpei Sugita, Takeyuki Abe

LEMP 2020; V001T04A006doi:https://doi.org/10.1115/LEMP2020-8567

Abstract

View Articletitled, Tool Posture Planning Method for Low Rigidity Workpiece Considering Elastic Deformation Caused by Cutting Force

PDF

Topics: Cutting , Deformation , Machining , Stiffness , Shapes , Blades , Computer simulation , Errors , Finishes , Finite element methods

Optimization Method of Rotational Axis Motion in 5-Axis Controlled Machining to Keep Command Tool Feed Rate

Takayuki Nakamura, Kohei Ichikawa, Masanobu Hasegawa, Jun'ichi Kaneko, Takeyuki Abe

LEMP 2020; V001T04A007doi:https://doi.org/10.1115/LEMP2020-8578

Abstract

View Articletitled, Optimization Method of Rotational Axis Motion in 5-Axis Controlled Machining to Keep Command Tool Feed Rate

PDF

Topics: Machining , Optimization

Development of Curved Hole Electrical Discharge Machining Method: Automatic Generation of Device Operating Command in Consideration of Realizing the Machining

Tohru Ishida, Yusuke Kaide, Akira Mizobuchi, Yoshimi Takeuchi

LEMP 2020; V001T04A008doi:https://doi.org/10.1115/LEMP2020-8600

Abstract

View Articletitled, Development of Curved Hole Electrical Discharge Machining Method: Automatic Generation of Device Operating Command in Consideration of Realizing the Machining

PDF

Topics: Electrical discharge machining , Machining , Teaching

Material Processing

Twin Roll Casting of Copper Alloy C19210 Using Commercial Scale Machine

Shogo Imai, Shinichi Nishida, Kyohei Ogawa, Makoto Hagiwara, Daichi Uematsu, Mizuki Kawawa, Yuto Horigome

LEMP 2020; V001T05A001doi:https://doi.org/10.1115/LEMP2020-8508

Abstract

View Articletitled, Twin Roll Casting of Copper Alloy C19210 Using Commercial Scale Machine

PDF

Topics: Casting , Copper alloys , Machinery , Strips , Stress , Dams , Metals , Release agents (Additives) , Cold rolling , Corrosion resistance

Screw Forming by Semi-Solid Forging of Aluminum Alloy A7075

Kyohei Ogawa, Shinichi Nishida, Shogo Imai, Daichi Uematsu, Makoto Hagiwara, Mizuki Kawawa, Kentaro Tsunoda

LEMP 2020; V001T05A002doi:https://doi.org/10.1115/LEMP2020-8509

Abstract

View Articletitled, Screw Forming by Semi-Solid Forging of Aluminum Alloy A7075

PDF

Topics: Aluminum alloys , Forging , Screws , Servomechanism presses

Joint Strength and its Improvement of Friction Welded Joint Between Ductile Cast Iron and 5052 Al Alloy

Masaaki Kimura, Akira Yoneda, Masahiro Kusaka, Koichi Kaizu, Kazuhiro Hayashida, Tsuyoshi Takahashi

LEMP 2020; V001T05A003doi:https://doi.org/10.1115/LEMP2020-8513

Abstract

View Articletitled, Joint Strength and its Improvement of Friction Welded Joint Between Ductile Cast Iron and 5052 Al Alloy

PDF

Topics: Aluminum alloys , Friction , Friction welding , Graphite , Nodular iron , Particulate matter , Welded joints

Grinding Performance and Delamination Analysis of FeSiB Metallic Glass Laminate

Zhenglong Fang, Keisuke Nagato, Naohiko Sugita, Masayuki Nakao

LEMP 2020; V001T05A004doi:https://doi.org/10.1115/LEMP2020-8520

Abstract

View Articletitled, Grinding Performance and Delamination Analysis of FeSiB Metallic Glass Laminate

PDF

Topics: Delamination , Grinding , Laminates , Metallic glasses , Cutting , Crystallization , Wear , Circuits , Deformation , Diffraction patterns

Experimental Investigation of Plastic Injection Molding Heating System Using Hydrogen Absorbing Alloys

Yoshio Fukushima, Masataka Kosaka

LEMP 2020; V001T05A005doi:https://doi.org/10.1115/LEMP2020-8580

Abstract

View Articletitled, Experimental Investigation of Plastic Injection Molding Heating System Using Hydrogen Absorbing Alloys

PDF

Topics: Alloys , Heating , Hydrogen , Injection molding , Manufacturing , Temperature , Heat , Computer simulation , Cooling , Engineering prototypes

Strength Characterization of Adhesive Joint Surface-Modified by Large-Area EB Irradiation

Yuya Omiya, Kenji Toyota, Ryota Nakanishi, Akira Okada, Togo Shinonaga, Masahiro Fujii

LEMP 2020; V001T05A006doi:https://doi.org/10.1115/LEMP2020-8585

Abstract

View Articletitled, Strength Characterization of Adhesive Joint Surface-Modified by Large-Area EB Irradiation

PDF

Topics: Adhesive joints , Irradiation (Radiation exposure) , Bonding , Adhesives , Surface finishing , Tensile strength , Adhesion , Aluminum alloys , Cathode ray oscilloscopes , Electromagnetic scattering

Precision Coating of ta-C Films on Quartz Surfaces

Kotaro Kawai, Yuki Hirata, Hiroki Akasaka, Naoto Ohtake

LEMP 2020; V001T05A007doi:https://doi.org/10.1115/LEMP2020-8589

Abstract

View Articletitled, Precision Coating of ta-C Films on Quartz Surfaces

PDF

Topics: Carbon , Coating processes , Coatings , Diamonds , Quartz , Raman spectroscopy , Vacuum , Atoms , Diamond films , Automobiles

Performance of the Plastic Injection Molding Mold Heating and Cooling System Using Hydrogen Absorbing Alloys

Masataka Kosaka, Yoshio Fukushima

LEMP 2020; V001T05A008doi:https://doi.org/10.1115/LEMP2020-8593

Abstract

View Articletitled, Performance of the Plastic Injection Molding Mold Heating and Cooling System Using Hydrogen Absorbing Alloys

PDF

Topics: Alloys , Heating and cooling , Hydrogen , Injection molding , Cycles , Absorption , Heating , Temperature , Carbon , Energy resources

Control of Material Flow During Friction Stir Welding Between Aluminum and Steel by Welding Tool Shape

Toshiaki Yasui, Yuki Ogura, Xu Huilin, F. Farrah Najwa, Daichi Sugimoto, Atsushi Ito, Masahiro Fukumoto

LEMP 2020; V001T05A009doi:https://doi.org/10.1115/LEMP2020-8594

Abstract

View Articletitled, Control of Material Flow During Friction Stir Welding Between Aluminum and Steel by Welding Tool Shape

PDF

Topics: Aluminum , Computational fluid dynamics , Flow (Dynamics) , Friction , Shapes , Steel , Welding , Welding equipment

Robustness of Detection Method for Clamp Force Against Configuration Error in Bolt/Nut Assemblies

Shinji Hashimura, Kai Kubota, Nozomu Ohmi, Kyoichi Komatsu

LEMP 2020; V001T05A010doi:https://doi.org/10.1115/LEMP2020-8605

Abstract

View Articletitled, Robustness of Detection Method for Clamp Force Against Configuration Error in Bolt/Nut Assemblies

PDF

Topics: Clamps (Tools) , Errors , Robustness

Resistance Spot Welding in Non-Combustible Magnesium Alloy

Xuanyi Shao, Yukio Miyashita, Duriyathep Panwised, Rattana Borrisutthekul

LEMP 2020; V001T05A011doi:https://doi.org/10.1115/LEMP2020-8610

Abstract

View Articletitled, Resistance Spot Welding in Non-Combustible Magnesium Alloy

PDF

Topics: Magnesium alloys , Welding

Plane Bending Fatigue in TIG and MIG Welds of Non-Combustible Magnesium Alloy

Xuanyi Shao, Rafidah Binti Ismail, Yukio Miyashita

LEMP 2020; V001T05A012doi:https://doi.org/10.1115/LEMP2020-8611

Abstract

View Articletitled, Plane Bending Fatigue in TIG and MIG Welds of Non-Combustible Magnesium Alloy

PDF

Topics: Fatigue , Magnesium alloys , Welded joints

Effect of Casting Conditions on Fluidity of Aluminum Alloy in Die Casting

Toshio Haga, Sinjiro Imamura, Hisaki Watari, Shinichi Nishida

LEMP 2020; V001T05A013doi:https://doi.org/10.1115/LEMP2020-8625

Abstract

View Articletitled, Effect of Casting Conditions on Fluidity of Aluminum Alloy in Die Casting

PDF

Topics: Aluminum alloys , Casting , Die casting (Process) , Die castings (Product)

Experimental and Analytical Resin Impregnation Characterization in Carbon Fiber Reinforced Thermoplastic Composites

Satoshi Kobayashi, Toshiko Osada

LEMP 2020; V001T05A014doi:https://doi.org/10.1115/LEMP2020-8627

Abstract

View Articletitled, Experimental and Analytical Resin Impregnation Characterization in Carbon Fiber Reinforced Thermoplastic Composites

PDF

Topics: Carbon fibers , Resins , Thermoplastic composites

Materials

Free Vibration and Thermal Fluid Structure Interaction Simulation of Functionally Graded Pipe by Modeling As Layered Structure

Ziyi Su, Kazuaki Inaba, Amit Karmakar, Apurba Das

LEMP 2020; V001T06A001doi:https://doi.org/10.1115/LEMP2020-8506

Abstract

View Articletitled, Free Vibration and Thermal Fluid Structure Interaction Simulation of Functionally Graded Pipe by Modeling As Layered Structure

PDF

Topics: Free vibrations , Functionally graded materials , Heat transfer , Modeling , Pipes , Simulation , Thermofluids

Measurement of Residual Strains As a Parameter of Matrix Cracking in CFRP Laminates

M. J. Mohammad Fikry, Shinji Ogihara, Vladimir Vinogradov

LEMP 2020; V001T06A002doi:https://doi.org/10.1115/LEMP2020-8512

Abstract

View Articletitled, Measurement of Residual Strains As a Parameter of Matrix Cracking in CFRP Laminates

PDF

Topics: Carbon reinforced plastics , Cracking (Materials) , Fracture (Materials) , Fracture (Process) , Laminates

Effect of Interfacial Nanostructure on Mode Mixity in Directly Bonded Carbon Fiber Reinforced Thermoplastic Laminates and Aluminum Alloy With Thermal Stresses

Hiroki Ota, Kristine Munk Jespersen, Kei Saito, Keita Wada, Kazuki Okamoto, Atsushi Hosoi, Hiroyuki Kawada

LEMP 2020; V001T06A003doi:https://doi.org/10.1115/LEMP2020-8544

Abstract

View Articletitled, Effect of Interfacial Nanostructure on Mode Mixity in Directly Bonded Carbon Fiber Reinforced Thermoplastic Laminates and Aluminum Alloy With Thermal Stresses

PDF

Topics: Aluminum alloys , Carbon fibers , Laminates , Thermal stresses , Joining , Bonding , Fracture toughness , Adhesives , Metals , Residual stresses

Development of Tool Steel Matrix Composites With High Thermal Conductivity

Gen Sasaki, Yongbum Choi, Kenjiro Sugio

LEMP 2020; V001T06A004doi:https://doi.org/10.1115/LEMP2020-8572

Abstract

View Articletitled, Development of Tool Steel Matrix Composites With High Thermal Conductivity

PDF

Topics: Composite materials , Steel , Thermal conductivity , Tool steel

Investigation of Fabrication Condition of Metal Matrix Piezoelectric Composite Using Surface Oxidized Metal Fiber As Internal Electrode

Tetsuro Yanaseko, Isao Kuboki, Hiroshi Sato, Hiroshi Asanuma

LEMP 2020; V001T06A005doi:https://doi.org/10.1115/LEMP2020-8576

Abstract

View Articletitled, Investigation of Fabrication Condition of Metal Matrix Piezoelectric Composite Using Surface Oxidized Metal Fiber As Internal Electrode

PDF

Topics: Composite materials , Electrodes , Manufacturing , Metal fibers , Metals , Piezoelectric ceramics , Fibers , Aluminum , Anisotropy , Design

Investigation of Fracture Behavior of Piezoelectric Ceramics Embedded in Metal Matrix

Karin Iijima, Tetsuro Yanaseko, Isao Kuboki, Hiroshi Sato, Hiroshi Asanuma

LEMP 2020; V001T06A006doi:https://doi.org/10.1115/LEMP2020-8583

Abstract

View Articletitled, Investigation of Fracture Behavior of Piezoelectric Ceramics Embedded in Metal Matrix

PDF

Topics: Fracture (Materials) , Fracture (Process) , Metals , Piezoelectric ceramics , Sensors , Fibers , Composite materials , Mechanical properties , Aluminum , Brittleness

Metrology, Monitoring, and Evaluation

In-Liquid Laser Nanomachining by Photonic Nanojet in Laser Trapping System

Reza Aulia Rahman, Tsutomu Uenohara, Yasuhiro Mizutani, Yasuhiro Takaya

LEMP 2020; V001T07A001doi:https://doi.org/10.1115/LEMP2020-8500

Abstract

View Articletitled, In-Liquid Laser Nanomachining by Photonic Nanojet in Laser Trapping System

PDF

Topics: Finite difference time-domain analysis , Laser trapping , Lasers , Machining

Development of an Optical Angle Sensor With a Mode-Locked Femtosecond Laser Source for Surface Profile Measurement

Yuki Shimizu, Shota Takazono, Yuri Kanda, Hiraku Matsukuma, Wei Gao, Hajime Inaba

LEMP 2020; V001T07A002doi:https://doi.org/10.1115/LEMP2020-8501

Abstract

View Articletitled, Development of an Optical Angle Sensor With a Mode-Locked Femtosecond Laser Source for Surface Profile Measurement

PDF

Topics: Fibers , Lasers , Sensors

Materials Evaluation and Environmental Monitoring Utilizing an Acoustic Resonance

Hironori Tohmyoh

LEMP 2020; V001T07A003doi:https://doi.org/10.1115/LEMP2020-8503

Abstract

View Articletitled, Materials Evaluation and Environmental Monitoring Utilizing an Acoustic Resonance

PDF

Topics: Acoustics , Polymer films , Reflectance , Resonance , Ultrasound , Reflection , Water , Acoustical properties , Density , Temperature

Sub-Micrometer Scale Laser Machining Using Position Controlled Photonic Nanojet

Tsutomu Uenohara, Yasuhiro Mizutani, Yasuhiro Takaya

LEMP 2020; V001T07A004doi:https://doi.org/10.1115/LEMP2020-8511

Abstract

View Articletitled, Sub-Micrometer Scale Laser Machining Using Position Controlled Photonic Nanojet

PDF

Topics: Lasers , Machining , Micromachining , Simulation

Ultrasonic Nondestructive Evaluation Methods Applicable to High-Temperature Environments Based on Optical Fiber Remote Sensing

Yoji Okabe, Fengming Yu, Osamu Saito

LEMP 2020; V001T07A005doi:https://doi.org/10.1115/LEMP2020-8519

Abstract

View Articletitled, Ultrasonic Nondestructive Evaluation Methods Applicable to High-Temperature Environments Based on Optical Fiber Remote Sensing

PDF

Topics: High temperature , Lasers , Nondestructive evaluation , Optical fiber

Debonding Detection at Core/Skin Interfaces in a Honeycomb Sandwich Structure Using a Laser Ultrasonic Visualization Method

Enhi Sen, Osamu Saito, Nobuhiro Higuchi, Yoji Okabe

LEMP 2020; V001T07A006doi:https://doi.org/10.1115/LEMP2020-8541

Abstract

View Articletitled, Debonding Detection at Core/Skin Interfaces in a Honeycomb Sandwich Structure Using a Laser Ultrasonic Visualization Method

PDF

Topics: Honeycomb structures , Lasers , Sandwich structures , Skin , Visualization , Waves

Measuring Optical Properties of Advanced Nano/Micro-Periodic Structures Fabricated by Multi-Exposure Interference Lithography

Shuzo Masui, Masaki Michihata, Kiyoshi Takamasu, Satoru Takahashi

LEMP 2020; V001T07A007doi:https://doi.org/10.1115/LEMP2020-8571

Abstract

View Articletitled, Measuring Optical Properties of Advanced Nano/Micro-Periodic Structures Fabricated by Multi-Exposure Interference Lithography

PDF

Topics: Diffraction gratings , Lithography

Profile Measurement by Using a Femtosecond Laser Chromatic Confocal Probe

Ryo Sato, Yuki Shimizu, Hiraku Matsukuma, Wei Gao

LEMP 2020; V001T07A008doi:https://doi.org/10.1115/LEMP2020-8626

Abstract

View Articletitled, Profile Measurement by Using a Femtosecond Laser Chromatic Confocal Probe

PDF

Topics: Lasers , Probes , Resolution (Optics) , Thermal stability

Sensor-Less Tool Wear Estimation Based on Change in Value of Identified Parameter in Cutting Force Prediction Model

Kazuki Kaneko, Isamu Nishida, Ryuta Sato, Keiichi Shirase

LEMP 2020; V001T07A009doi:https://doi.org/10.1115/LEMP2020-8628

Abstract

View Articletitled, Sensor-Less Tool Wear Estimation Based on Change in Value of Identified Parameter in Cutting Force Prediction Model

PDF

Topics: Cutting , Milling , Sensors , Simulation , Wear

Micro Manufacturing and Surface Technology

Burnishing Characteristics of Sliding Burnishing Process With Active Rotary Tool Targeting Stainless Steel

Masato Okada, Shin Terada, Yuki Kataoka, Takeshi Kihara, Takuya Miura, Masaaki Otsu

LEMP 2020; V001T08A001doi:https://doi.org/10.1115/LEMP2020-8515

Abstract

View Articletitled, Burnishing Characteristics of Sliding Burnishing Process With Active Rotary Tool Targeting Stainless Steel

PDF

Topics: Stainless steel

Tribological Properties Between a-C:H Coatings and SiO₂ at High Temperature

Noritsugu Umehara, Kota Konishi, Motoyuki Murashima, Takayuki Tokoroyama

LEMP 2020; V001T08A002doi:https://doi.org/10.1115/LEMP2020-8522

Abstract

View Articletitled, Tribological Properties Between a-C:H Coatings and SiO<sub>2</sub> at High Temperature

PDF

Topics: Coatings , Friction , High temperature , Tribology

Fabrication of Flexible Interposer Using Printing Method

Atsuhiro Furuta, Kazuki Honjo, Jun Taniguchi

LEMP 2020; V001T08A003doi:https://doi.org/10.1115/LEMP2020-8524

Abstract

View Articletitled, Fabrication of Flexible Interposer Using Printing Method

PDF

Topics: Inks , Manufacturing , Printing , Silver , Ultraviolet radiation , Circuits , Photolithography , Silicon , Coating processes , Coatings

Light Environment Design Support System Using Light-Guiding Plate With Decorative Cut Surface: Effects of Stripe Pattern Decorative Cutting on Plates Made From Transparent Resin

Takumi Imada, Keiji Ogawa, Takuya Tachibana, Tetsuya Sera, Toru Okabe

LEMP 2020; V001T08A004doi:https://doi.org/10.1115/LEMP2020-8525

Abstract

View Articletitled, Light Environment Design Support System Using Light-Guiding Plate With Decorative Cut Surface: Effects of Stripe Pattern Decorative Cutting on Plates Made From Transparent Resin

PDF

Topics: Brightness (Photometry) , Cutting , Design , Plates (structures) , Resins , Transparency

Fabrication of Novel Microvalves Driven by Heat From Magnetic Nanoparticles

Daiki Miwa, Junpei Sakurai, Seiichi Hata, Chiemi Oka

LEMP 2020; V001T08A005doi:https://doi.org/10.1115/LEMP2020-8529

Abstract

View Articletitled, Fabrication of Novel Microvalves Driven by Heat From Magnetic Nanoparticles

PDF

Topics: Heat , Magnetic fields , Manufacturing , Nanoparticles

Measurement and Evaluation of the Static Friction Coefficient Between Fixed Coupling Surfaces Under Face Contact and High Contact Pressure

Fumihiko Inagaki, Noboru Morita, Hirofumi Hidai, Souta Matsusaka, Tatsuo Ohmori, Akira Chiba, Yuichiro Matsumoto, Shinji Shimizu

LEMP 2020; V001T08A006doi:https://doi.org/10.1115/LEMP2020-8530

Abstract

View Articletitled, Measurement and Evaluation of the Static Friction Coefficient Between Fixed Coupling Surfaces Under Face Contact and High Contact Pressure

PDF

Topics: Pressure , Stiction , Grinding , Surface roughness , Sliding friction , Steel , Stiffness

Fabrication of an Antireflective Structure on a Lenticular Lens

Katsuyuki Yatagawa, Masato Nakamura, Masaki Ono, Jun Taniguchi, Shin Hiwasa

LEMP 2020; V001T08A007doi:https://doi.org/10.1115/LEMP2020-8534

Abstract

View Articletitled, Fabrication of an Antireflective Structure on a Lenticular Lens

PDF

Topics: Lenses (Optics) , Manufacturing , Ultraviolet radiation

Low Friction Realised by Hydrogen-Ended DLC Surface Through Photocatalyst Effect in Water Lubricated Condition

Motoyuki Murashima, Yusuke Imaizumi, Takazumi Yamada, Katsuno Shotaro, Tomoki Yoshida, Noritsugu Umehara, Takayuki Tokoroyama

LEMP 2020; V001T08A008doi:https://doi.org/10.1115/LEMP2020-8537

Abstract

View Articletitled, Low Friction Realised by Hydrogen-Ended DLC Surface Through Photocatalyst Effect in Water Lubricated Condition

PDF

Topics: Carbon , Diamonds , Friction , Hydrogen , Water

Micro/Nano-Printing of Metal and Nanoparticle Thin Film and its Application to MEMS Device

Arata Kaneko, Akihiro Mori, Keisuke Kanada, Chen Sumin, Wang Ke

LEMP 2020; V001T08A009doi:https://doi.org/10.1115/LEMP2020-8546

Abstract

View Articletitled, Micro/Nano-Printing of Metal and Nanoparticle Thin Film and its Application to MEMS Device

PDF

Topics: Graphene , Metals , Microelectromechanical systems , Nanoparticles , Printing , Thin films

Performance Improvement of Ultrasonic-Assisted Grinding Using PCD Micropin Tools

Kai Egashira, Keishi Yamaguchi, Minoru Ota

LEMP 2020; V001T08A010doi:https://doi.org/10.1115/LEMP2020-8552

Abstract

View Articletitled, Performance Improvement of Ultrasonic-Assisted Grinding Using PCD Micropin Tools

PDF

Topics: Electrical discharge machining , Grinding

On-Machine Metrology System Using Confocal Chromatic Probe and Motion Error Correction for Ultra-Precision Machine Tool

Hao Duan, Shinya Morita, Takuya Hosobata, Masahiro Takeda, Yutaka Yamagata

LEMP 2020; V001T08A011doi:https://doi.org/10.1115/LEMP2020-8564

Abstract

View Articletitled, On-Machine Metrology System Using Confocal Chromatic Probe and Motion Error Correction for Ultra-Precision Machine Tool

PDF

Topics: Errors , Machine tools , Machinery , Metrology , Probes

Cutting Characteristics of Hard-Brittle Materials Under Nano/Micro Groove Cutting Using a V-Shape Tool

Yoshino Masahiko, Shen Hao, Yuki Nakagawa, Abdallah Abdelkawy

LEMP 2020; V001T08A012doi:https://doi.org/10.1115/LEMP2020-8577

Abstract

View Articletitled, Cutting Characteristics of Hard-Brittle Materials Under Nano/Micro Groove Cutting Using a V-Shape Tool

PDF

Topics: Brittleness , Cutting , Shapes

Diamond Fly Cutting Applied to Improve Curved Surface Machining by In-Process Measurement and Control on an Ordinary Milling Machine

Tatsuki Otsubo, Takanori Yazawa, Jinhui Wang, Tomonori Kato

LEMP 2020; V001T08A013doi:https://doi.org/10.1115/LEMP2020-8590

Abstract

View Articletitled, Diamond Fly Cutting Applied to Improve Curved Surface Machining by In-Process Measurement and Control on an Ordinary Milling Machine

PDF

Topics: Cutting , Diamonds , Errors , Machining , Milling machines

The Influence of Defects in ta-C Coating Deposited by FCVA Method on Their Tribological Behavior

Woo-Young Lee, Young-Jun Jang, Takayuki Tokoroyama, Motoyuki Murashima, Noritsugu Umehara

LEMP 2020; V001T08A014doi:https://doi.org/10.1115/LEMP2020-8591

Abstract

View Articletitled, The Influence of Defects in ta-C Coating Deposited by FCVA Method on Their Tribological Behavior

PDF

Topics: Coatings , High temperature , Tribology

Wear Resistant DLC Coatings for Soft Metallic Materials

Takanori Yamaki, Takuya Osawa, Makoto Matsuo, Hiroki Akasaka, Shinji Tanaka, Masao Kikuchi, Yuki Hirata, Naoto Ohtake, Hiroshi Yamamoto

LEMP 2020; V001T08A015doi:https://doi.org/10.1115/LEMP2020-8592

Abstract

View Articletitled, Wear Resistant DLC Coatings for Soft Metallic Materials

PDF

Topics: Carbon , Diamond films , Diamonds , Tribology , Wear , Dust , Brass (Metal) , Coating processes , Coatings , Construction equipment

Generation of Micro Texture Including Calcium and Phosphorus Elements on Titanium Alloy for Improvement of Biocompatibility With Laser Induced Mist Surface Treatment

Atsushi Ezura, Kazutoshi Katahira, Jun Komotori

LEMP 2020; V001T08A016doi:https://doi.org/10.1115/LEMP2020-8597

Abstract

View Articletitled, Generation of Micro Texture Including Calcium and Phosphorus Elements on Titanium Alloy for Improvement of Biocompatibility With Laser Induced Mist Surface Treatment

PDF

Topics: Biocompatibility , Lasers , Surface finishing , Texture (Materials) , Titanium alloys

Development of Friction Stabilization Control Using Genetic Algorithm and Contact Point Control Method

Takazumi Yamada, Motoyuki Murashima, Noritsugu Umehara, Takayuki Tokoroyama

LEMP 2020; V001T08A017doi:https://doi.org/10.1115/LEMP2020-8602

Abstract

View Articletitled, Development of Friction Stabilization Control Using Genetic Algorithm and Contact Point Control Method

PDF

Topics: Friction , Genetic algorithms , Damage , Machinery , Maintenance , Artificial intelligence , Diaphragms (Mechanical devices) , Diaphragms (Structural) , Probability , Satellites