... , S. G. , Glezer , A. M. , and Aldokhin , D. B. , “ Influence of Destabilizing Action on Mechanical Properties of Amorphous Alloys ,” Materialovedenie , No. 7 , 2004 , pp. 28 – 37 (in Russian). Kissinger , H. E. , “ Reaction Kinetic in Differential Thermal Analysis ,” Analit...

.... , Ienco , M. G. , Pinasco , M. R. , Stagno , E. , Gerosa , R. , Rivolta , B. , Silvestri , A. , and Silva , G. , and Ghidini , A. , “ Relationships between Tensile and Fracture Mechanics Properties and Fatigue Properties of Large Plastic Mould Steel Blocks ,” Mater. Sci...

...-3 (≈ M3 class 2). It turns out that one of the new alloys has comparable mechanical properties but superior wear resistance, especially at elevated temperatures, thanks to a tripled carbide content and increased temperature strength of the matrix material. References Broeckmann , C...

... – 1841 . https://doi.org/10.1016/j.surfcoat.2005.08.008 Caruso , R. , Gómez , B. J. , De Sanctis , O. , Feugeas , J. N. , Díaz-Parralejo , A. , and Sánchez-Bajo , F. , “ Ion Nitriding of Zirconia Coated on Stainless Steel Structure and Mechanical Properties ,” Thin Solid...

.... The various analytical methods are discussed along with their estimates of uncertainty, the impact on micro-mechanics, and how to lower this uncertainty further. 16 07 2010 23 11 2010 21 12 2010 single fiber tensile testing Young’s modulus mechanical properties References ASTM...

... properties of the irradiated cladding under high strain rates, however, are very limited, and conventional axial tensile data measured at slow strain rates may not be directly applicable to RIA or drop impact analyses. The objective of this work was to obtain basic mechanical properties such as the stress...

...Erin M. Williams; Stephen A. Akers; Rebecca P. Berger; Paul A. Reed An extensive program of quasi-static mechanical property tests was conducted to characterize the mechanical behavior of type N and type S mortars under various stress and strain boundary conditions to decide which mortar to use...

...S. Jayalakshmi; E. Fleury In hydrogen-related energy technologies, the selection of materials is critical since hydrogen can modify the initial microstructure and induce damage that could result in the reduction of mechanical properties and embrittlement. In this context, metallic amorphous alloys...

... and Mechanical Properties of Ti Cu Ni Alloys with High Ti Content ABSTRACT: A series of Ti Cu Ni alloys with Ti content as high as 50 70 at. % expected to possess potential high glass-forming ability GFA was designed according to the criterion Xia, M. X., Zhang, S. G., Ma, C. L., and Li, J. G., Evaluation...

... mineral compositions and microstructural parameters), physical properties, and mechanical properties. The main factor identified in this study is orientation of foliation planes in serpentinites. Samples that are selected parallel to foliation planes have higher mechanical properties than those...

... requiring more stringent mechanical properties such as wear, deformation resistance, and fatigue life from the railway steel. Steel chemistry control and thermomechanical processing significantly affect final properties and performance of the railway steel. For example, for a given steel composition...

...Ziliang Li; Heming Cheng; Jianyun Li; Lijun Hou Heat treatment is one method to improve mechanical properties of metal, but each heat treatment method has its advantages and disadvantages, therefore, different requirements regarding size, shape, and properties with respect to different heat...

...Nailu Chen; Xunwei Zuo; Shu Zhou; Jun Xu Some steels fail to meet mechanical property requirements after oil quenching with subsequent tempering. If water is used in an attempt to facilitate better property formation, quenching cracks may then be encountered. To address these situations...

.... The characteristic cooling time, relevant for the results of quenching, was predicted by the computer simulation of quenching of both the JM ® -specimen and cylindrical specimen. Mechanical properties of quenched steel directly depend on the degree of quenched steel hardening. The algorithm of the estimation...

...Israfil Kocaman; Can Burak Sisman; Erhan Gezer This study was carried out to investigate the effect of coal clinker used in briquette production on physical and mechanical properties of briquettes. To do this, seven briquette classes were formed by changing the volume of coal clinker and all...

...Mokhfi Takarli; William Prince-Agbodjan In this paper, the effect of thermal treatment on physical and mechanical properties of a granitic rock is experimentally investigated. The open porosity, gas permeability, P-wave velocity (and their attenuation), ultimate strength, and Young’s modulus...

... composites revealed typical brittle fracture. magnesium matrix composites in-situ synthesis method mechanical properties References Luo Alan , A. , “ Recent Magnesium Alloy Development for Automotive Power Train Applications ,” Mater. Sci. Forum   0255-5476 , 419 – 422 , 57 – 66 ( 2003...

...) small precipitates (40 nm) and mechanical properties of 26RC hardness, 910 MPa tensile strength, 860 MPa yield strength, 20,8% elongation and 199J Charpy impact. References Haynes , A. G. , Proceedings, Conference on Supermartensitic Stainless Steels , 1999 , pp. 25 - 32 . Heimann...

...N Smaoui; B Bissonnette; M-A Bérubé; B Fournier; B Durand This experimental study was conducted to investigate the effects of the alkali-silica reactivity (ASR) on the mechanical properties of concrete, and in particular the strength and the modulus of elasticity under direct tension. Two highly...

...-4Nb alloy with a low metal release rate is considered advantageous for long-term surgical implants. 13 08 2004 26 01 2005 10 2005 corrosion resistance metal release mechanical properties fatigue strength rat tibia implantation bone tissue response 2004-11-09 - 2004-11...