Skip Nav Destination
Issues
October 2004
ISSN 1546-962X
In this Issue
Research Papers
Microstructure Response in Copper and Copper Alloys Irradiated with Fission Neutrons with Controlled Temperature Variations
J. ASTM Int.. October 2004, 1(9): 1–10.
doi: https://doi.org/10.1520/JAI11243
Properties of 20% Cold-Worked 316 Stainless Steel Irradiated at Low Dose Rate
J. ASTM Int.. October 2004, 1(9): 1–12.
doi: https://doi.org/10.1520/JAI11252
Fracture Toughness and Atom Probe Characterization of a Highly Embrittled RPV Weld
J. ASTM Int.. October 2004, 1(9): 1–15.
doi: https://doi.org/10.1520/JAI11312
Effect of Stress Relief Time on the Transition Temperature of Linde 80 Welds
J. ASTM Int.. October 2004, 1(9): 1–13.
doi: https://doi.org/10.1520/JAI11315
Irradiation Creep and Swelling of Russian Ferritic-Martensitic Steels Irradiated to Very High Exposures in the BN-350 Fast Reactor at 305–335°C
J. ASTM Int.. October 2004, 1(9): 1–9.
doi: https://doi.org/10.1520/JAI11342
Grain Boundary Phosphorous Segregation and Its Influence on the Ductile Brittle Transition Temperature in Reactor Pressure Vessel Steels
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI11369
New Methodologies for Developing Radiation Embrittlement Models and Trend Curves of the Charpy Impact Test Data
J. ASTM Int.. October 2004, 1(9): 1–19.
doi: https://doi.org/10.1520/JAI11373
The Macro-Microscopic Numerical Simulation of the Mechanical Behavior of CFCC with Matrix Anisotropic Damage by Homogenization Method
J. ASTM Int.. October 2004, 1(9): 1–19.
doi: https://doi.org/10.1520/JAI11417
Identification of Crystalline Behavior on Macroscopic Response and Local Strain Field Analysis: Application to Alpha Zirconium Alloys
J. ASTM Int.. October 2004, 1(9): 1–17.
doi: https://doi.org/10.1520/JAI12333
Spectrum Fatigue Testing and Small-Crack Life Prediction Analysis on a Coupon Similar to a Critical Design Detail of a CF188 Hornet Component
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI19032
Variable Amplitude Fatigue Crack Growth Using Digital Signal Processing Technology
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI19043
Development of a DCPD Calibration for Evaluation of Crack Growth in Corner-Notched, Open-Hole Specimens
J. ASTM Int.. October 2004, 1(9): 1–15.
doi: https://doi.org/10.1520/JAI19044
A Model for the Inclusion of Notch Plasticity Effects in Fatigue Crack Growth Analysis
J. ASTM Int.. October 2004, 1(9): 1–27.
doi: https://doi.org/10.1520/JAI19045
Study on Fatigue Design Loads for Ships Based on Crack Growth Analysis
J. ASTM Int.. October 2004, 1(9): 1–15.
doi: https://doi.org/10.1520/JAI19046
High Cycle Fatigue Testing and Analysis Using Car Standard Sequence
J. ASTM Int.. October 2004, 1(9): 1–13.
doi: https://doi.org/10.1520/JAI19047
Fuzzy Probabilistic Assessment of Aging Aircraft Structures Subjected to Multiple Site Fatigue Damage
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI19053
Effect of Overloads and Underloads on Fatigue Crack Growth and Interaction Effects
J. ASTM Int.. October 2004, 1(9): 1–15.
doi: https://doi.org/10.1520/JAI19054
Calculation of Stress Intensity Factors for Cracks in Structural and Mechanical Components Subjected to Complex Stress Fields
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI19055
Crack Initiation at a Notch under Constant and Selected Variable Amplitude Loading Conditions
J. ASTM Int.. October 2004, 1(9): 1–14.
doi: https://doi.org/10.1520/JAI19063
Proposed Method for Determining the Residual Mortar Content of Recycled Concrete Aggregates
J. ASTM Int. (January 2008)
Effects of Contamination on Aerospace Hydraulic Component and System Performance
J. ASTM Int. (October 2008)
Microstructural Stability of M5™ Alloy Irradiated up to High Neutron Fluences
J. ASTM Int. (July 2005)
Promoted Metals Combustion at Ambient and Elevated Temperatures
J. ASTM Int. (June 2006)
