Abstract

This paper reviews existing specifications, specifically for the application of crushed concrete or recycled concrete aggregate (RCA) as pavement material for unbound subbases and basecourses. While the use of recycled crushed concrete is not new internationally, its application in Australia is unique as it is being commonly used as a granular basecourse/subbase supporting thin bituminous seals (asphalt or spray seal/chip seal). Commonality of specifications is explored and differences that exist are questioned. In light of practice outside of Australia, limitations by Australian authorities placed on recycled material inclusions other than crushed concrete are raised. In this paper, two South Australian-based RCA products, which were designed for use as pavement bases, are compared with current engineering specifications. The RCA products performed well in terms of resilient modulus and permanent deformation. However, properties such as abrasion resistance and wet/dry strength may restrict the application of the material if current specifications are justifiable.

Issue Section:
Research Papers
Keywords:
recycled concrete, road base, resilient modulus, specification

References

1.
Vuono
,
C. E.
, and
Welch
,
L. D.
,
“Standard Practice for Pavement Recycling,”
 
Departments of the Army, and the Air Force
,
Washington, D.C.
,
1988
.
2.
Vyncke
,
J.
,
Desmyter
,
J.
, and
Merckx
,
M.
,
“Use of Recycled Materials as Aggregates in the Construction Industry,”
 
European Thematic Network (ETN) Recycling in Construction
, Vol.
2
,
European Thematic Network
,
Belgium
,
2000
, http://www.eco-serve.net/uploads/ETN_NL2.pdf (Last accessed August 9, 2011).
3.
Reid
,
J. M.
,
Evans
,
R. D.
,
Holnsteiner
,
R.
,
Wimmer
,
B.
,
Gaggl
,
W.
,
Berg
,
F.
,
Pihl
,
K. A.
,
Milvang-Jensen
,
O.
,
Hjelmar
,
O.
,
Rathmeyer
,
H.
,
François
,
D.
,
Raimbault
,
G.
,
Johansson
,
H. G.
,
Håkansson
,
K.
,
Nilsson
,
U.
, and
Hugener
,
M.
,
“Alternative Materials ALT_MAT,”
 Final Report, Contract No. RO-97- SC. 2238, 
Funded by the European Commission under the Transport RTD Programme of the 4th Framework Programme
,
UK
,
2001
.
4.
Bowman & Associates Pty Ltd.
,
“Recycled Concrete Road Base Quality Investigation,”
 
Strategic Waste Initiative Scheme (SWIS) Grant Scheme 4003
,
Perth, Australia
,
2009
.
5.
Andrews
,
B.
,
Sharp
,
K.
, and
Robinson
,
P.
,
“Report on Construction and Demolition Waste Recycled Materials Workshop,”
 Draft Report,
Zero Waste
,
South Australia, Australia
,
2009
.
6.
Potturi
,
A.
,
2006
,
“Evaluation of Resilient Modulus of Cement and Cement-Fiber Treated Reclaimed Asphalt Pavement (RAP) Aggregates Using Repeated Load Triaxial Test,”
M.Sc. thesis,
Texas at Arlington University,
TX.
7.
Environment Protection Authority
, ISBN 978-1-921495-07-6,
2010
,
“Standard for the Production and Use of Waste Derived Fill,”
 
EPA, South Australia
,
Australia
.
8.
Bowman & Associates Pty Ltd.
,
“Recycled Concrete Road Base Transport Subsidy for Test Pavement Trial,”
 
SWIS Grant Scheme 5805
,
Perth, Australia
,
2009
.
9.
VicRoads
,
2009
,
“Crushed Concrete for Pavement Subbase and Light Duty Base,”
Section 820,
VicRoads Standards
,
Victoria, Australia
, http://webapps.vicroads.vic.gov.au/VRNE/csdspeci.nsf/webscdocs/F8A5CBF7F2DA525ACA257584001B5DA3?OpenDocument. (Last accessed August 4, 2010).
10.
Roads and Traffic Authority NSW
,
2009
,
“Granular Base and Subbase Materials for Surfaced Road Pavements,”
 
Draft V3.10, QA Specification 3051
, 6th ed.,
RTA
,
NSW, Australia
.
11.
Resource NSW
,
2003
,
“Specification for Supply of Recycled Material for Pavements, Earthworks & Drainage,”
 http://www.resource.nsw.gov.au (Last accessed April 30, 2010).
12.
TSA 2000/02428
,
2001
,
“Standard Specification for Supply and Delivery of Pavement Materials,”
 Government of South Australia, Revision 1,
Department for Transport, Energy and Infrastructure
, Adelaide,
Australia
.
13.
DTEI
,
2008
,
“Determination of a Characteristic Value of Resilient Modulus and Rate of Deformation for Unbound Granular Pavement Materials,”
 DTEI Specifications, Materials Group Procedure, TP183, http://www.transport.sa.gov.au/materialstechnology (Last accessed May 4, 2011).
14.
AASHTO T307
,
2002
,
“Standard Method of Test for Resilient Modulus of Subgrade Soils and Untreated Base/Subbase Materials,”
 
AASHTO
,
Washington, D.C
.
15.
Vuong
,
B. T.
, and
Brimble
,
R.
,
2000
,
“Austroads Repeated Load Triaxial Method—Determination of Permanent Deformation and Resilient Modulus Characteristics of Unbound Granular Materials Under Drained Conditions,”
 
APRG Document 00/33 (MA)
,
Melbourne
,
Australia
.
16.
Arnold
,
G.
,
Werkemeister
,
S.
, and
Alabaster
 
D.
,
“Performance Tests for Rd. Aggregates and Alternative Materials,”
 
Land Transport New Zealand Research Report No. 335
,
Wellington, New Zealand
,
2008
.
17.
Main Roads Western Australia (MRWA)
,
2009
,
“Specification 501—Pavements,”
 
Document No. 04/10110-03, Issue 29/04/09
,
Perth, Australia
.
18.
Molenaar
,
A. A. A.
,
2005
,
“Cohesive and Non-Cohesive Soils and Unbound Granular Materials for Bases and Sub-Bases in Roads,”
 
Lecture Notes on Road Materials, Part I
,
Delft University
,
Delft, The Netherlands
.
19.
Forsman
,
J.
, Korjus, H., Kivekäs, L., and Määttänen, A., 2001,
“The Quality Control and Geotechnical Properties of Reclaimed Concrete in Earth Construction,”
 
International Conference on Practical Applications in Environmental Geotechnology Ecogeo 2000
, Geological Survey of Finland, Special Paper 32, pp. 7–13, funded by the National Technology Agency of Finland (Tekes),
private Finnish enterprises and R&D organisations
,
Espoo, Finland
.
20.
European Standard EN 13242:2002+A1:2007, “Aggregates for Unbound and Hydraulically Bound Materials for Use in Civil Engineering Work and Road Construction,” British Standards, approved by European Committee for Standardization (CEN), London, UK
.
21.
European Standard EN 13285:2003, “Unbound Mixtures-Specification,” British Standards, approved by CEN, London, UK
.
22.
European Standard 933-11:2009, “Tests for Geometrical Properties of Aggregates-Part 11. Classification Test for the Constituents of Coarse Recycled Aggregate,” British Standards, approved by CEN, London, UK
.
23.
Laboratório Nacional De Engenharia Civil (LNEC)
,
“Guia Para a Utilização de Agregados Reciclados em Camadas não Ligadas de Pavimentos [Guide for the Use of Recycled Aggregates in Unbound Pavement Layers],”
 
E 473 Specification
,
Portugal
,
2006
(in Portuguese).
24.
Håkan
,
A
, VTI,
“General Technical Description Crushed Concrete in Road Constructions,”
 Sustainable Pavements for European New Member States (SPENS), translated and summarised from Swedish Rd. Administration’s “Allmän teknisk beskrivning—Krossad betong i vägkonstruktioner,”
2004
(in Swedish).
25.
EN 12390-3:2009, “Testing Hardened Concrete-Part 3. Compressive Strength of Test Specimens,” British Standards, approved by CEN, London, UK.
26.
EN 1097-1:1998, “Tests for Mechanical and Physical Properties of Aggregates-Part 1. Determination of the Resistance to Wear (Micro-Deval),” British Standards, approved by CEN, London, UK.
27.
Pihl
,
K. A.
, Milvang-Jensen, O., and Berg, F.,
“Crushed Concrete From Building Demolition is a High Quality Material for Road Construction,”
 25th International Baltic Road Conference and Exhibition, August 25–27, 2003, Vilnius, Lithuania.
28.
Ile
 
de France
,
“Guide Techniques Pour L’Utilisation des Matériaux Régionaux d’Ile de France: Les Bétons et Produits de Démolition Recycles”
[Technical Guides for the Use of Regional Materials of Ile de France: Concretes and Recycled Products of Demolition],” Ile-de-France, Paris,
France
,
2003
.
29.
Stolle
,
D.
, Guo, P., and Liu, Y.,
2009
,
“Resilient Modulus Properties of Granular Highway Materials,”
 http://www.nrcresearchpress.com/journal/cjce (Last accessed August 9, 2011).
30.
Wu
,
Y.
,
Parker
,
F.
, and
Kandhal
,
K.
,
“Aggregate Toughness/Abrasion Resistance and Durability/Soundness Tests Related to Asphalt Concrete Performance in Pavements,”
 Report No. 98-4, 
National Center for Asphalt Technology, Auburn University
,
Alabama
,
1998
.
Google Scholar
Crossref
Search ADS
 
31.
AASHTO M319-02
,
2002
,
“Standard Specification for Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course,”
 
AASHTO
,
Washington, D.C
.
32.
Blankenagel
,
B. J.
,
2005
,
“Characterization of Recycled Concrete for Use as Pavement Base Material,”
M.Sc. thesis,
Brigham Young University, Provo
, UT.
33.
Gomez-Soberon
,
J. M. V.
,
“Shrinkage of Concrete With Replacement of Aggregate With Recycled Concrete Aggregate,”
 
A. Concr. Inst. Spec. Publ.
, Vol.
209
,
2002
, pp.
475
–
496
.
34.
EcoRecycle
,
“Investigation Into the Use of Recycled Crushed Concrete for Road Base Use,”
Prepared for EcoRecycle by VicRoads in conjunction with Alex Fraser,
CSR Readymix Quarries, and Independent Cement and Lime Pty Ltd,
Melbourne,
Australia
,
1997
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.