Abstract
Short fatigue cracks were investigated in a 0.14 wt % carbon steel (SAE 1017) in fine grained condition by optical observation of the surface of smooth specimens under fatigue loading. Axial fatigue experiments were carried out under constant and step amplitude conditions. The lifetime to crack initiation was calculated for each ferrite grain with regard to grain size and orientation. For the calculation of crack propagation, the slip band length (grain size) and the distance between crack tip and next barrier (grain boundary) are taken into consideration. Furthermore, the simulation program includes some geometrical aspects for the description of crack coalescence.
Issue Section:
Research Papers
References
1.
Tanaka
, K.
and Mura
, T.
, “A Dislocation Model for Fatigue Crack Initiation
,” J. Appl. Mech.
0021-8936, Vol. 48
, 1981
, pp. 97
-103
.2.
Hoshide
, T.
and Kusuura
, K.
, “Life Prediction by Simulation of Crack Growth in Notched Components with Different Microstructures and under Multiaxial Fatigue
,” Fatigue and Fracture of Engineering Materials and Structures
, Vol. 21
, 1985
, pp. 201
-213
.3.
de los Rios
, E. R.
, Mohamed
, H. J.
, and Miller
, K. J.
, “A Micro-Mechanics Analysis for Short Fatigue Crack Growth
,” Fatigue and Fracture of Engineering Materials and Structures
, Vol. 8
, No. 1
, 1985
, pp. 49
-63
.4.
Bomas
, H.
, Hünecke
, J.
, Laue
, S.
, and Schöne
, D.
, “Prediction of Lifetime to Fatigue Crack Initiation under Consideration of Notches in a Low Carbon Steel SAE 1017
,” DVM-Report No. 683, Bremen, 2000
, pp.65
-80
.5.
Weiss
, J.
and Pineau
, A.
, “Microstructurally-Based Simulation of Multiaxial Low Cycle Fatigue Damage
,” Proceedings of the 3rd International Conference on Low Cycle Fatigue and Elasto-Plastic Behavior of Materials
, K.-T.
Rie
, Ed., Elsevier Applied Science
, London-New York
, 1992
, pp. 82
-87
.6.
Iida
, K.
, “Microcrack Density as an Indication of Accumulated Fatigue Damage
,” Proceedings of the 3rd International Conference on Low Cycle Fatigue and Elasto-Plastic Behavior of Materials
, K.-T.
Rie
, Ed., Elsevier Applied Science
, London-New York
, 1992
, pp. 490
-495
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.