Abstract
This study presents impingement cooling from a flat plate by multiple asymmetric jets. Such jets are discharged through blunt-edge inline orifice holes with a thickness-to-diameter ratio of t/Dj = 0.5 and a jet-to-jet spacing of T/Dj = 4.0, at the Reynolds number of 20,000. First, fluidic features are established both in free exit and with impingement, at varying short target spacing (e.g., H/Dj ≤ 4.0). Second, thermal characteristics of the jet impingement are elucidated. Results demonstrate that, due to a skewed incidence of the coolant stream upstream of concave orifice holes, the resulting multiple orifice jets are asymmetric and skewed relative to the orifice axis. These results mimic multiple fluidically inclined jets. However, asymmetric entrainment that takes place causes faster mixing with the surrounding fluid at rest as well as faster decay of momentum. This shows more effective cooling from a flat plate for the relatively short H/Dj range than conventional symmetric orifice and nozzle jets.
Issue Section:
Jets, Wakes, and Impingement Cooling
References
1.
Moon
,
S. W.
, and
Lau
,
S. C.
, 2003
, “
Heat Transfer Between Blockages With Holes in a Rectangular Channel
,” ASME J. Heat Transfer-Trans. ASME
,
125
(4
), pp. 587
–594
.10.1115/1.15768122.
Shakouchi
,
T.
, and
Kito
,
M.
, 2012
, “
Heat Transfer Enhancement of Impinging Jet by Notched-Orifice Nozzle
,” An Overview of Heat Transfer Phenomena
,
S. N.
Kazi
, ed.,
InTech
, London, pp. 441
–468
.3.
Lee
,
J.
, and
Lee
,
S.-J.
, 2000
, “
The Effect of Nozzle Configuration on Stagnation Region Heat Transfer Enhancement of Axisymmetric Jet Impingement
,” Int. J. Heat Mass Transfer
,
43
(18
), pp. 3497
–3509
.10.1016/S0017-9310(99)00349-X4.
Quinn
,
W. R.
, 2006
, “
Upstream Nozzle Shaping Effects on Near Field Flow in Round Turbulent Free Jets
,” Eur. J. Mech. - B/Fluids
,
25
(3
), pp. 279
–301
.10.1016/j.euromechflu.2005.10.0025.
El Hassan
,
M.
, and
Meslem
,
A.
, 2010
, “
Time-Resolved Stereoscopic Particle Image Velocimetry Investigation of the Entrainment in the Near Field of Circular and Daisy-Shaped Orifice Jets
,” Phys. Fluids
,
22
(3
), p. 035107
.10.1063/1.33584656.
Miller
,
D. R.
, and
Comings
,
E. W.
, 1960
, “
Force-Momentum Fields in a Dual-Jet Flow
,” J. Fluid Mech.
,
7
(2
), pp. 237
–256
.10.1017/S00221120600014687.
Knystautas
,
R.
, 1964
, “
The Turbulent Jet From a Series of Holes in Line
,” Aeronaut. Q.
,
15
(1
), pp. 1
–28
.10.1017/S00019259000029858.
Nasr
,
A.
, and
Lai
,
J. C. S.
, 1997
, “
Two Parallel Plane Jets: Mean Flow and Effects of Acoustic Excitation
,” Exp. Fluids
,
22
(3
), pp. 251
–260
.10.1007/s0034800500449.
Ghahremanian
,
S.
,
Svensson
,
K.
,
Tummers
,
M. J.
, and
Moshfegh
,
B.
, 2014
, “
Near-Field Development of a Row of Round Jets at Low Reynolds Numbers
,” Exp. Fluids
,
55
, p. 1789
.10.1007/s00348-014-1789-210.
Okamoto
,
T.
,
Yagita
,
M.
,
Watanabe
,
A.
, and
Kawamura
,
K.
, 1985
, “
Interaction of Twin Turbulent Circular Jet
,” Bull. JSME
,
28
(238
), pp. 617
–622
.10.1299/jsme1958.28.61711.
Glaser
,
H.
, 1962
, “
Untersuchungen an Schlitz- und Mehrdusenanordnungen bei der Trocknung feuchter Oberflachen durch Warmluftstrahlen
,” Chem. Ing. Tech.
,
34
(3
), pp. 200
–207
.10.1002/cite.33034031212.
Saripalli
,
K. R.
, 1983
, “
Visualization of Multijet Impingement Flow
,” AIAA J.
,
21
(4
), pp. 483
–484
.10.2514/3.810213.
Saripalli
,
K.
, 1985
, “
Laser Doppler Velocimeter Measurements in a 3-D Impinging Twin-Jet Fountain Flow
,” AIAA
Paper No. 85-4036.10.2514/6.85-403614.
Koopman
,
R. N.
, and
Sparrow
,
E. M.
, 1976
, “
Local and Average Transfer Coefficients Due to an Impinging Row of Jets
,” Int. J. Heat Mass Transfer
,
19
(6
), pp. 673
–683
.10.1016/0017-9310(76)90051-X15.
Goldstein
,
R. J.
, and
Timmers
,
J. F.
, 1982
, “
Visualization of Heat Transfer From Arrays of Impinging Jets
,” Int. J. Heat Mass Transfer
,
25
(12
), pp. 1857
–1868
.10.1016/0017-9310(82)90108-916.
Krause
,
D. A.
,
Soechting
,
F. O.
,
Mongillo
,
D. J.
, Jr.
, and
Zelesky
,
M. F.
, 1999
, “
Airfoil Cooling
,” European Patent No. EP-0-896-127-A2.17.
Coleman
,
H. W.
, and
Steele
,
W. G.
, 2009
, Experimentation, Validation, and Uncertainty Analysis for Engineers
, 3rd ed.,
Wiley
,
Hoboken, NJ
.18.
Abramovich
,
G. N.
, 1963
, The Theory of Turbulent Jets
,
The MIT Press
,
Cambridge, MA
.19.
Gauntner
,
J. W.
,
Livingood
,
J. N. B.
, and
Hrycak
,
P.
, 1970
, “
Survey of Literature on Flow Characteristics of a Single Turbulent Jet Impinging on a Flat Plate
,” NASA, Washington, DC
, Report No. NASA TN D-5652.20.
Nguepnang
,
M. A.
,
Boer
,
M.
, and
Kim
,
T.
, 2016
, “
Stagnation Heat Transfer on a Concave Surface Cooled by Unconfined Slot Jet
,” J. Thermophys. Heat Transfer
,
30
(3
), pp. 558
–566
.10.2514/1.T479321.
Katti
,
V.
, and
Prabhu
,
S. V.
, 2008
, “
Experimental Study and Theoretical Analysis of Local Heat Transfer Distribution Between Smooth Flat Surface and Impinging Air Jet From a Circular Straight Pipe Nozzle
,” Int. J. Heat Mass Transfer
,
51
(17–18
), pp. 4480
–4495
.10.1016/j.ijheatmasstransfer.2007.12.02422.
Nirmalkumar
,
M.
,
Katti
,
V.
, and
Prabhu
,
S. V.
, 2011
, “
Local Heat Transfer Distribution on a Smooth Flat Plate Impinged by a Slot Jet
,” Int. J. Heat Mass Transfer
,
54
(1–3
), pp. 727
–738
.10.1016/j.ijheatmasstransfer.2010.09.03023.
Gulati
,
P.
,
Katti
,
V.
, and
Prabhu
,
S. V.
, 2009
, “
Influence of the Shape of the Nozzle on Local Heat Transfer Distribution Between Smooth Flat Surface and Impinging Air Jet
,” Int. J. Therm. Sci.
,
48
(3
), pp. 602
–617
.10.1016/j.ijthermalsci.2008.05.00224.
Lytle
,
D.
, and
Webb
,
B. W.
, 1994
, “
Air Jet Impingement Heat Transfer at Low Nozzle-Plate Spacings
,” Int. J. Heat Mass Transfer
,
37
(12
), pp. 1687
–1697
.10.1016/0017-9310(94)90059-025.
Martin
,
H.
, 1977
, “
Heat and Mass Transfer Between Impinging Gas Jets and Solid Surfaces
,” Advances in Heat Transfer
,
J. P.
Hartnett
and
T. F.
Irvine
, eds.,
Elsevier
, Amsterdam, The Netherlands, pp. 1
–60
.26.
Wang
,
X. L.
,
Yan
,
H. B.
,
Lu
,
T. J.
,
Song
,
S. J.
, and
Kim
,
T.
, 2014
, “
Heat Transfer Characteristics of an Inclined Impinging Jet on a Curved Surface in Crossflow
,” ASME J. Heat Transfer-Trans. ASME
,
136
(8
), p. 081702
.10.1115/1.402738927.
Lee
,
J.
, and
Lee
,
S.-J.
, 1999
, “
Stagnation Region Heat Transfer of a Turbulent Axisymmetric Jet Impingement
,” Exp. Heat Transfer
,
12
(2
), pp. 137
–156
.10.1080/08916159926975328.
Gardon
,
R.
, and
Akfirat
,
J. C.
, 1965
, “
The Role of Turbulence in Determining the Heat-Transfer Characteristics of Impinging Jets
,” Int. J. Heat Mass Transfer
,
8
(10
), pp. 1261
–1272
.10.1016/0017-9310(65)90054-229.
Barata
,
J. M.
, 1996
, “
Fountain Flows Produced by Multiple Impinging Jets in a Crossflow
,” AIAA J.
,
34
(12
), pp. 2523
–2530
.10.2514/3.13434Copyright © 2022 by ASME
You do not currently have access to this content.
