Cracking control is very important for laser drilling of yttria-stabilized zirconia (YSZ). In this paper, a thermomechanical model is presented to investigate what will be happened in the trepan drilling of YSZ by a picosecond pulsed laser. The thermal model is developed for describing the interaction between laser and YSZ material to obtain the transient temperature. The mechanical model is developed to calculate the stress distribution caused by the phase transformation based on the temperature results. The goal of the present study is to explore the intrinsic mechanism of cracking around the drilled hole from the aspect of the phase transformation in laser drilling of YSZ.
Issue Section:
Heat Transfer in Manufacturing
Reference
1.
Adelmann
, B.
, and Hellmann
, R.
, 2015
, “Rapid Micro Hole Laser Drilling in Ceramic Substrates Using Single Mode Fiber Laser
,” J. Mater. Process. Technol.
, 221
, pp. 80
–86
.2.
Klotzbach
, U.
, Washio
, K.
, Arnold
, C. B.
, Gaebler
, F.
, van Nunen
, J.
, and Held
, A.
, 2016
, “Trends in Laser Micromachining
,” Proc. SPIE
9736
, p. 973604
.3.
Lima
, R. S.
, and Marple
, B. R.
, 2008
, “Nanostructured YSZ Thermal Barrier Coatings Engineered to Counteract Sintering Effects
,” Mater. Sci. Eng. A
, 485
(1–2
), pp. 182
–193
.4.
Miragaya
, L. M.
, Guimaraes
, R. B.
, Souza
, R.
, Santos Botelho
, G. D.
, Antunes Guimaraes
, J. G.
, and da Silva
, E. M.
, 2017
, “Effect of Intra-Oral Aging on t → m Phase Transformation, Microstructure, and Mechanical Properties of Y-TZP Dental Ceramics
,” J. Mech. Behav. Biomed. Mater.
, 72
(1
), pp. 14
–21
.5.
Wang
, M.
, Yang
, L.
, Zhang
, S.
, and Wang
, Y.
, 2018
, “Experimental Investigation on the Spiral Trepanning of K24 Superalloy With Femtosecond Laser
,” Opt. Laser Technol.
, 101
, pp. 284
–290
.6.
Shi
, C.
, Ren
, N.
, Wang
, H.
, Xia
, K.
, and Wang
, L.
, 2018
, “Effects of Ultrasonic Assistance on Microhole Drilling Based on Nd:YAG Laser Trepanning
,” Opt. Laser Technol.
, 106
, pp. 451
–460
.7.
Ali
, A.
, and Sundaram
, M.
, 2018
, “Drilling of Crack Free Micro Holes in Glass by Chemo-Thermal Micromachining Process
,” Precis. Eng.
, 54
, pp. 33–38.8.
Wang
, Z.
, Feng
, G.
, Wang
, S.
, Li
, G.
, Dai
, S.
, and Zhou
, S.
, 2017
, “Improving the Quality of Femtosecond Laser Processing Micro-Hole Array by Coated With Aluminum Film on Fused Silica Sheet
,” Optik
, 128
, pp. 178
–184
.9.
Casalino
, G.
, Losacco
, A. M.
, Arnesano
, A.
, Facchini
, F.
, Pierangeli
, M.
, and Bonserio
, C.
, 2017
, “Statistical Analysis and Modelling of an Yb: KGW Femtosecond Laser Micro-Drilling Process
,” Procedia CIRP
, 62
, pp. 275
–280
.10.
Dorsch
, F.
, Kaierle
, S.
, Uchtmann
, H.
, He
, C.
, and Gillner
, A.
, 2016
, “High Precision and High Aspect Ratio Laser Drilling: Challenges and Solutions
,” Proc. SPIE
9741
, p. 974106
.11.
Lughi
, V.
, and Clarke
, D. R.
, 2007
, “Low-Temperature Transformation Kinetics of Electron-Beam Deposited 5 wt.% Yttria-Stabilized Zirconia
,” Acta Mater.
, 55
(6
), pp. 2049
–2055
.12.
Clarke
, D. R.
, and Adar
, F.
, 1982
, “Measurement of the Crystallographically Transformed Zone Produced by Fracture in Ceramics Containing Tetragonal Zirconia
,” J. Am. Ceram. Soc.
, 65
(6
), pp. 284
–288
.13.
Li
, C.
, Zhang
, X.
, Chen
, Y.
, Carr
, J.
, Jacques
, S.
, Behnsen
, J.
, di Michiel
, M.
, Xiao
, P.
, and Cernik
, R.
, 2017
, “Understanding the Residual Stress Distribution Through the Thickness of Atmosphere Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs) by High Energy Synchrotron XRD; Digital Image Correlation (DIC) and Image Based Modelling
,” Acta Mater.
, 132
(1
), pp. 1
–12
.14.
Chowdhury
, S.
, Laugier
, M. T.
, and Henry
, J.
, 2007
, “XRD Stress Analysis of CVD Diamond Coatings on SiC Substrates
,” Int. J. Refract. Met. Hard Mater.
, 25
(1
), pp. 39
–45
.15.
Xiong
, J.
, Qin
, W.
, Cui
, X.
, Tao
, B.
, Tang
, J.
, and Li
, Y.
, 2007
, “High-Resolution XRD Study of Stress-Modulated YBCO Films With Various Thicknesses
,” J. Cryst. Growth
, 300
(2
), pp. 364
–367
.16.
Yang
, L.
, Yang
, F.
, Long
, Y.
, Zhao
, Y.
, Xiong
, X.
, Zhao
, X.
, and Xiao
, P.
, 2014
, “Evolution of Residual Stress in Air Plasma Sprayed Yttria Stabilised Zirconia Thermal Barrier Coatings After Isothermal Treatment
,” Surf. Coat. Technol.
, 251
, pp. 98
–105
.17.
Shen
, H.
, Feng
, D.
, and Yao
, Z.
, 2016
, “Modeling of Underwater Laser Drilling of Alumina
,” ASME J. Manuf. Sci. Eng.
, 139
(4
), p. 041008
.18.
Arrizubieta
, I.
, Lamikiz
, A.
, Martínez
, S.
, Ukar
, E.
, Tabernero
, I.
, and Girot
, F.
, 2013
, “Internal Characterization and Hole Formation Mechanism in the Laser Percussion Drilling Process
,” Int. J. Mach. Tools Manuf.
, 75
, pp. 55
–62
.19.
Hanon
, M. M.
, Akman
, E.
, Oztoprak
, B. G.
, Gunes
, M.
, Taha
, Z. A.
, Hajim
, K. I.
, Kacar
, E.
, Gundogdu
, O.
, and Demir
, A.
, 2012
, “Experimental and Theoretical Investigation of the Drilling of Alumina Ceramic Using Nd:YAG Pulsed Laser
,” Opt. Laser Technol.
, 44
(4
), pp. 913
–922
.20.
Bharatish
, A.
, Narasimha Murthy
, H. N.
, Aditya
, G.
, Anand
, B.
, Satyanarayana
, B. S.
, and Krishna
, M.
, 2015
, “Evaluation of Thermal Residual Stresses in Laser Drilled Alumina Ceramics Using Micro-Raman Spectroscopy and COMSOL Multiphysics
,” Opt. Laser Technol.
, 70
, pp. 76
–84
.21.
Wang
, R.
, Duan
, W.
, Wang
, K.
, Dong
, X.
, Fan
, Z.
, Mei
, X.
, Wang
, W.
, and Zhang
, S.
, 2018
, “Computational and Experimental Study on Hole Evolution and Delamination in Laser Drilling of Thermal Barrier Coated Nickel Superalloy
,” Opt. Lasers Eng.
, 107
, pp. 161
–175
.22.
Kang
, Y. X.
, Bai
, Y.
, Yuan
, T.
, Wang
, Y.
, Fan
, W.
, Gao
, Y.
, Bao
, C. G.
, Chen
, H. Y.
, and Li
, B. Q.
, 2017
, “Thermal Cycling Lives of Plasma Sprayed YSZ Based Thermal Barrier Coatings in a Burner Rig Corrosion Test
,” Surf. Coat. Technol.
, 324
, pp. 307
–317
.23.
Dong
, H.
, Yang
, G.-J.
, Cai
, H.-N.
, Ding
, H.
, Li
, C.-X.
, and Li
, C.-J.
, 2015
, “The Influence of Temperature Gradient Across YSZ on Thermal Cyclic Lifetime of Plasma-Sprayed Thermal Barrier Coatings
,” Ceram. Int.
, 41
(9
), pp. 11046
–11056
.24.
Bernard
, B.
, Quet
, A.
, Bianchi
, L.
, Joulia
, A.
, Malié
, A.
, Schick
, V.
, and Rémy
, B.
, 2017
, “Thermal Insulation Properties of YSZ Coatings: Suspension Plasma Spraying (SPS) Versus Electron Beam Physical Vapor Deposition (EB-PVD) and Atmospheric Plasma Spraying (APS)
,” Surf. Coat. Technol.
, 318
, pp. 122
–128
.25.
Hu
, W.
, Shin
, Y. C.
, and King
, G. B.
, 2010
, “Micromachining of Metals, Alloys, and Ceramics by Picosecond Laser Ablation
,” ASME J. Manuf. Sci. Eng.
, 132
(1
), p. 011009
.26.
Xue
, N.
, Ren
, Y.
, Ren
, X.
, Ren
, N.
, Lin
, Q.
, Wang
, Q.
, and Qin
, K.
, 2018
, “Phase Filed Simulation of Dendritic Growth of Copper Films Irradiated by Ultrashort Laser Pulses
,” Comput. Mater. Sci.
, 148
, pp. 60
–68
.27.
Hillert
, M.
, 1991
, “Thermodynamic Model of the Cubic → Tetragonal Transition in Nonstoichiometric Zirconia
,” J. Am. Ceram. Soc.
, 74
(8
), pp. 2005
–2006
.28.
Zhang
, Y.
, Shen
, Z.
, and Ni
, X.
, 2014
, “Modeling and Simulation on Long Pulse Laser Drilling Processing
,” Int. J. Heat Mass Transfer
, 73
, pp. 429
–437
.29.
Wang
, Y.
, and Djordjevic
, N.
, 2014
, “Thermal Stress FEM Analysis of Rock With Microwave Energy
,” Int. J. Miner. Process.
, 130
, pp. 74
–81
.30.
Mohammadi
, A.
, Vanhove
, H.
, Van Bael
, A.
, Seefeldt
, M.
, and Duflou
, J. R.
, 2016
, “Effect of Laser Transformation Hardening on the Accuracy of SPIF Formed Parts
,” ASME J. Manuf. Sci. Eng.
, 139
(1
), p. 011007
.31.
Tian
, Y.
, and Shin
, Y. C.
, 2006
, “Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics With Complex Features
,” ASME J. Manuf. Sci. Eng.
, 128
(2
), p. 425
.32.
Chase
, M. W.
, and National Institute of Standards and Technology (U.S.)
, 1998
, “NIST-JANAF Thermochemical Tables
,” American Chemical Society
; American Institute of Physics for the National Institute of Standards and Technology
, Washington, DC
.33.
Heiroth
, S.
, Koch
, J.
, Lippert
, T.
, Wokaun
, A.
, Günther
, D.
, Garrelie
, F.
, and Guillermin
, M.
, 2010
, “Laser Ablation Characteristics of Yttria-Doped Zirconia in the Nanosecond and Femtosecond Regimes
,” J. Appl. Phys.
, 107
(1
), p. 014908
.34.
Limarga
, A. M.
, and Clarke
, D. R.
, 2007
, “Piezo-Spectroscopic Coefficients of Tetragonal-Prime Yttria-Stabilized Zirconia
,” J. Am. Ceram. Soc.
, 90
(4
), pp. 1272
–1275
.35.
Limarga
, A. M.
, Iveland
, J.
, Gentleman
, M.
, Lipkin
, D. M.
, and Clarke
, D. R.
, 2011
, “The Use of Larson–Miller Parameters to Monitor the Evolution of Raman Lines of Tetragonal Zirconia With High Temperature Aging
,” Acta Mater.
, 59
(3
), pp. 1162
–1167
.36.
Kim
, D. J.
, Jung
, H. J.
, and Yang
, I. S.
, 1993
, “Raman Spectroscopy of Tetragonal Zirconia Solid Solutions
,” J. Am. Ceram. Soc.
, 76
(8
), pp. 2106
–2108
.37.
Eraslan
, A. N.
, 2003
, “Elastoplastic Deformations of Rotating Parabolic Solid Disks Using Tresca's Yield Criterion
,” Eur. J. Mech. A
, 22
(6
), pp. 861
–874
.38.
Liu
, M.
, Gan
, Y.
, Hanaor
, D. A. H.
, Liu
, B.
, and Chen
, C.
, 2015
, “An Improved Semi-Analytical Solution for Stress at Round-Tip Notches
,” Eng. Fract. Mech.
, 149
(1
), pp. 134
–143
.39.
Wei
, S.
, Fu-chi
, W.
, Qun-bo
, F.
, Zhuang
, M.
, and Xue-wen
, Y.
, 2011
, “Finite Element Simulation of Tensile Bond Strength of Atmospheric Plasma Spraying Thermal Barrier Coatings
,” Surf. Coat. Technol.
, 205
(8–9
), pp. 2964
–2969
.Copyright © 2019 by ASME
You do not currently have access to this content.
