An experimental study is undertaken to investigate the flow structure and heat transfer in a stagnation flow chemical vapor deposition (CVD) reactor at atmospheric pressure. It is critical to develop models that predict flow patterns in such a reactor to achieve uniform deposition across the substrate. Free convection can negatively affect the gas flow as cold inlet gas impinges on the heated substrate, leading to vortices and disturbances in the normal flow path. This experimental research will be used to understand the buoyancy-induced and momentum driven flow structure encountered in an impinging jet CVD reactor. Investigations are conducted for various operating and design parameters. A modified stagnation flow reactor is built where the height between the inlet and substrate is reduced when compared with a prototypical stagnation flow reactor. By operating such a reactor at certain Reynolds and Grashof numbers, it is feasible to sustain smooth and vortex free flow at atmospheric pressure. The modified stagnation flow reactor is compared with other stagnation flow geometries with either a varied inlet length or varied heights between the inlet and substrate. Comparisons are made to understand the impact of such geometric changes on the flow structure and the thermal boundary layer. In addition, heat transfer correlations are obtained for the substrate temperature. Overall, the results obtained provide guidelines for curbing the effects of buoyancy and for improving the flow field to obtain greater film uniformity when operating a stagnation flow CVD reactor at atmospheric pressure.
Skip Nav Destination
Article navigation
Research Papers
Flow Structure and Heat Transfer in a Stagnation Flow CVD Reactor
Nasir Memon,
Nasir Memon
Nanotechnology for Clean Energy IGERT, Department of Mechanical and Aerospace Engineering,
Rutgers University
, Piscataway, NJ 08854
Search for other works by this author on:
Yogesh Jaluria
Yogesh Jaluria
Department of Mechanical and Aerospace Engineering,
Rutgers University
, New Brunswick, NJ 08855
Search for other works by this author on:
Nasir Memon
Nanotechnology for Clean Energy IGERT, Department of Mechanical and Aerospace Engineering,
Rutgers University
, Piscataway, NJ 08854
Yogesh Jaluria
Department of Mechanical and Aerospace Engineering,
Rutgers University
, New Brunswick, NJ 08855J. Heat Transfer. Aug 2011, 133(8): 082501 (6 pages)
Published Online: May 4, 2011
Article history
Received:
September 26, 2010
Revised:
February 10, 2011
Online:
May 4, 2011
Published:
May 4, 2011
Citation
Memon, N., and Jaluria, Y. (May 4, 2011). "Flow Structure and Heat Transfer in a Stagnation Flow CVD Reactor." ASME. J. Heat Transfer. August 2011; 133(8): 082501. https://doi.org/10.1115/1.4003749
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Numerical Study of Mixed Convection Flow in an Impinging Jet CVD Reactor for Atmospheric Pressure Deposition of Thin Films
J. Heat Transfer (October,2004)
Momentum and Heat Transfer in MHD Stagnation-Point Flow Over a Shrinking Sheet
J. Appl. Mech (March,2011)
Analysis of an Impinging Two-Dimensional Jet
J. Heat Transfer (March,2006)
Investigation Into the Similarity Solution for Boundary Layer Flows in Microsystems
J. Heat Transfer (April,2010)
Related Chapters
Theoretical Investigation of Pressure in Transient Reversed Stagnation-Point Flow
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3
Laminar Fluid Flow and Heat Transfer
Applications of Mathematical Heat Transfer and Fluid Flow Models in Engineering and Medicine
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)