The heat transfer characteristics of an impinging jet into a crossflow have been investigated by the liquid crystal thermography technique. The jet nozzle is circular and is inclined at 10 deg with respect to the target wall. In a turbulent flow regime, the effects of the jet Reynolds number, the velocity ratio, and the crossflow Reynolds number on the heat transfer are examined. The results show that the heat transfer patterns are strongly affected by the jet Reynolds number and the velocity ratio. For a given jet Reynolds number, it is found that the crossflow diminishes the peak Nusselt number in the jet impingement region. However, in the wall jet region, the results suggest that the local heat transfer is nearly independent of the crossflow Reynolds number.

References

References
1.
Chung
,
Y. S.
,
Lee
,
D. H.
, and
Ligrani
,
P. M.
, 2005, “
Jet Impingement Cooling of Chips Equipped With Cylindrical Pedestal Profile Fins
,”
ASME J. Electron. Packag.
,
127
, pp.
106
112
.
2.
Lee
,
D. H.
,
Chung
,
Y. S.
, and
Ligrani
,
P. M.
, 2007, “
Jet Impingement Cooling of Chips Equipped With Multiple Cylindrical Pedestal Fins
,”
ASME J. Electron. Packag.
,
129
, pp.
221
228
.
3.
Wen.
M. Y.
, and
Jang
,
K. J.
, 2003, “
An Impingement Cooling on a Flat Surface by Using Circular Jet With Longitudinal Swirling Strips
,”
Int. J. Heat Mass Transfer
,
46
, pp.
4657
4667
.
4.
Gau
,
C.
,
Sheu
,
W. Y.
, and
Shen
,
C. H.
, 1997, “
Impingement Cooling Flow and Heat Transfer Under Acoustic Excitations
,”
ASME J. Heat Transfer
,
119
, pp.
810
817
.
5.
Fric
,
T. F.
, and
Roshko
,
A.
, 1994, “
Vortical Structure in the Wake of a Transverse Jet
,”
J. Fluid Mech.
,
279
, pp.
1
47
.
6.
Salewski
,
M.
,
Stankovic
,
D.
, and
Fuchs
,
L.
, 2008, “
Mixing in Circular and Non-Circular Jets in Crossflow
,”
Flow, Turbul. Combust
.,
80
, pp.
255
283
.
7.
Sparrow
,
E. M.
,
Goldstein
,
R. J.
, and
Rouf
,
M. A.
, 1975, “
Effect of Nozzle-Surface Separation Distance on Impingement Heat Transfer for a Jet in a Crossflow
,”
ASME J. Heat Transfer
,
97
, pp.
528
533
.
8.
Bouchez
,
J. P.
, and
Goldstein
,
R. J.
, 1975, “
Impingement Cooling From a Circular Jet in a Cross Flow
,”
Int. J. Heat Mass Transfer
,
18
, pp.
719
730
.
9.
Goldstein
,
R. J.
, and
Behbahani
,
A. I.
, 1982, “
Impingement of a Circular Jet with and without Cross Flow
,”
Int. J. Heat Mass Transfer
,
25
, pp.
1377
1382
.
10.
Nakabe
,
K
,
Inaoka
,
K.
,
Ai
,
T.
, and
Suzuki
,
K.
, 1997, “
Flow Visualization of Longitudinal Vortices Induced by an Inclined Impinging Jet in a Crossflow—Effective Cooling of High Temperature Gas Turbine Blades
,”
Energy Convers. Manage.
38
, pp.
1145
1153
.
11.
Metzger
,
D. E.
, and
Korstad
,
R. J.
, 1972, “
Effects of Crossflow on Impingement Heat Transfer
,”
ASME J. Eng. Power
,
94
, pp.
35
42
.
12.
Al-Sanea
,
S.
, 1992, “
A Numerical Study of the Flow and Heat Transfer Characteristics of an Impinging Laminar Slot-Jet Including Crossflow Effects
,”
Int. J. Heat Mass Transfer
,
35
, pp.
2501
2513
.
13.
Aldabbagh
,
L. B. Y.
,
Sezai
,
I.
, and
Mohamad
,
A. A.
, 2003, “
Three-Dimensional Investigation of a Laminar Impinging Square Jet Interaction With Cross-Flow
,”
ASME J. Heat Transfer
,
125
, pp.
243
249
.
14.
Shi
,
Y
,
Ray
,
M. B.
, and
Mujumdar
,
A. S.
, 2003, “
Numerical Study of the Effect of Cross-Flow on Turbulent Flow and Heat Transfer Characteristics Under Normal and Oblique Semi-Confined Impinging Jets
,”
Drying Technol.
,
21
, pp.
1923
1939
.
15.
Metzger
,
D. E.
,
Florschuetz
,
L. W.
,
Takeuchi
,
D. I.
,
Behee
,
R. D.
, and
Berry
,
R. A.
, 1979, “
Heat Transfer Characteristics for Inline and Staggered Arrays of Circular Jets With Crossflow of Spent Air
,”
ASME J. Heat Transfer
,
101
, pp.
526
531
.
16.
Florschuetz
,
L. W.
,
Truman
,
C. R.
, and
Metzger
,
D. E.
, 1981, “
Streamwise Flow and Heat Transfer Distributions for Jet Array Impingement With Crossflow
,”
ASME J. Heat Transfer
,
103
, pp.
337
342
.
17.
Obot
,
N. T.
, and
Trabold
,
T. A.
, 1987, “
Impingement Heat Transfer Within Arrays of Circular Jets: Part 1—Effects of Minimum Intermediate, and Complete Crossflow for Small and Large Spacing
,”
ASME J. Heat Transfer
,
109
, pp.
872
879
.
18.
Park
,
J.
,
Goodro
,
M.
,
Ligrani
,
P.
,
Fox
,
M.
, and
Moon
,
H. K.
, 2007, “
Separated Effects of Mach Number and Reynolds Number on Jet Array Impingement Heat Transfer
,”
ASME J. Turbomach.
,
129
, pp.
269
280
.
19.
Goodro
,
M.
,
Park
,
J.
,
Ligrani
,
P.
,
Fox
,
M.
, and
Moon
,
H. K.
, 2007, “
Effects of Mach Number and Reynolds Number on Jet Array Impingement Heat Transfer
,”
Int. J. Heat Mass Transfer
,
50
, pp.
367
380
.
20.
Goodro
,
M.
,
Ligrani
,
P.
,
Fox
,
M.
, and
Moon
,
H. K.
, 2010, “
Mach Number, Reynolds Number, Jet Spacing Variations: Full Array of Impinging Jets
,”
J. Thermophys. Heat Transfer
,
24
, pp.
133
144
.
21.
Goodro
,
M.
,
Park
,
J.
,
Ligrani
,
P.
,
Fox
,
M.
, and
Moon
,
H. K.
, 2008, “
Effects of Hole Spacing on Spatially-Resolved Jet Array Impingement Heat Transfer
,”
Int. J. Heat Mass Transfer
,
51
, pp.
6243
6253
.
22.
Goodro
,
M.
,
Park
,
J.
,
Ligrani
,
P.
,
Fox
,
M.
, and
Moon
,
H. K.
, 2009, “
Effect of Temperature Ratio on Jet Array Impingement Heat Transfer
,”
ASME J. Heat Transfer
,
131
,
012201
.
23.
Wang
,
L.
, and
Sundén
,
B.
, 2007, “
Experimental Investigation of Local Heat Transfer in a Square Duct With Various-Shaped Ribs
,”
Heat Mass Transfer
,
43
, pp.
759
766
.
24.
Rütten
,
F.
,
Schröder
,
W
, and
Meinke
,
M.
, 2005, “
Large-Eddy Simulation of Low Frequency Oscillations of the Dean Vortices in Turbulent Pipe Bend Flows
,”
Phys. Fluids
,
17
,
035107
.
25.
Schlichting
,
H.
, 1979,
Boundary-Layer Theory
,
7th ed.
,
McGraw–Hill
,
New York
.
26.
Lim
,
T. T.
,
Kelso
,
R. M.
, and
Perry
,
A. E.
, 1992, “
A Study of a Round Jet in Crossflow at Different Velocity Ratios
,”
11th Australasian Fluid Mech. Conf.
,
University of Tasmania
,
Hobart, Australia
, Dec. 14–18.
27.
Dean
,
J. A.
, 1998,
Lange’s Handbook of Chemistry
,
15th ed.
,
McGraw–Hill
,
New York
.
28.
Moffat
,
R. J.
, 1988, “
Describing the Uncertainties in Experimental Results
,”
Exp. Therm. Fluid Sci.
,
1
, pp.
3
17
.
29.
Sparrow
,
E. M.
, and
Lovell
,
B. J.
, 1980, “
Heat Transfer Characteristics of an Obliquely Impinging Circular Jet
,”
ASME J. Heat Transfer
,
102
, pp.
202
209
.
30.
Goldstein
,
R. J.
, and
Franchett
,
M. E.
, 1988, “
Heat Transfer From a Flat Surface to an Oblique Impinging Jet
,”
ASME J. Heat Transfer
,
110
, pp.
84
90
.
31.
Yan
,
X.
, and
Saniei
,
N.
, 1997, “
Heat Transfer From an Obliquely Impinging Circular Air Jet to a Flat Plate
,”
Int. J. Heat Fluid Flow
,
18
, pp.
591
599
.
32.
Tawfek
,
A. A.
, 2002, “
Heat Transfer Studies of the Oblique Impingement of Round Jets Upon a Curved Surface
,”
Heat Mass Transfer
,
38
, pp.
467
475
.
33.
Stevens
,
J.
, and
Webb
,
B. W.
, 1991, “
Local Heat Transfer Coefficients Under an Axisymmetric, Single-Phase Liquid Jet
,”
ASME J. Heat Transfer
,
113
, pp.
71
78
.
You do not currently have access to this content.