The topology and geometry of microstructures play a crucial role in determining their heat transfer performance in passive cooling devices such as heat pipes. It is therefore important to characterize microstructures based on their wicking performance, the thermal conduction resistance of the liquid filling the microstructure, and the thin-film characteristics of the liquid meniscus. In the present study, the free-surface shapes of the static liquid meniscus in common microstructures are modeled using SURFACE EVOLVER for zero Bond number. Four well-defined topologies, viz., surfaces with parallel rectangular ribs, horizontal parallel cylinders, vertically aligned cylinders, and spheres (the latter two in both square and hexagonal packing arrangements), are considered. Nondimensional capillary pressure, average distance of the liquid free-surface from solid walls (a measure of the conduction resistance of the liquid), total exposed area, and thin-film area are computed. These performance parameters are presented as functions of the nondimensional geometrical parameters characterizing the microstructures, the volume of the liquid filling the structure, and the contact angle between the liquid and solid. Based on these performance parameters, hexagonally-packed spheres on a surface are identified to be the most efficient microstructure geometry for wicking and thin-film evaporation. The solid-liquid contact angle and the nondimensional liquid volume that yield the best performance are also identified. The optimum liquid level in the wick pore that yields the highest capillary pressure and heat transfer is obtained by analyzing the variation in capillary pressure and heat transfer with liquid level and using an effective thermal resistance model for the wick.
Skip Nav Destination
e-mail: sureshg@purdue.edu
Article navigation
Research Papers
Analysis of the Wicking and Thin-Film Evaporation Characteristics of Microstructures
Ram Ranjan,
Ram Ranjan
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, West Lafayette, IN 47907-2088
Search for other works by this author on:
Jayathi Y. Murthy,
Jayathi Y. Murthy
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, West Lafayette, IN 47907-2088
Search for other works by this author on:
Suresh V. Garimella
Suresh V. Garimella
School of Mechanical Engineering and Birck Nanotechnology Center,
e-mail: sureshg@purdue.edu
Purdue University
, West Lafayette, IN 47907-2088
Search for other works by this author on:
Ram Ranjan
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, West Lafayette, IN 47907-2088
Jayathi Y. Murthy
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, West Lafayette, IN 47907-2088
Suresh V. Garimella
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, West Lafayette, IN 47907-2088e-mail: sureshg@purdue.edu
J. Heat Transfer. Oct 2009, 131(10): 101001 (11 pages)
Published Online: July 28, 2009
Article history
Received:
September 5, 2008
Revised:
February 19, 2009
Published:
July 28, 2009
Citation
Ranjan, R., Murthy, J. Y., and Garimella, S. V. (July 28, 2009). "Analysis of the Wicking and Thin-Film Evaporation Characteristics of Microstructures." ASME. J. Heat Transfer. October 2009; 131(10): 101001. https://doi.org/10.1115/1.3160538
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Evaporation Heat Transfer in Sintered Porous Media
J. Heat Transfer (August,2003)
A Semi-Analytical Model to Predict the Capillary Limit of Heated Inclined Triangular Capillary Grooves
J. Heat Transfer (February,2002)
Capillary Performance of Evaporating Flow in Micro Grooves: An Approximate Analytical Approach and Experimental Investigation
J. Heat Transfer (August,1998)
Temperature Response of Heat Transport in a Micro Heat Pipe
J. Heat Transfer (May,1999)
Related Proceedings Papers
Related Chapters
Insulating Properties of W-Doped Ga2O3 Films Grown on Si Substrate for Low-K Applications
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Energy Balance for a Swimming Pool
Electromagnetic Waves and Heat Transfer: Sensitivites to Governing Variables in Everyday Life
Self-Consistent Dependence of Porosity and Refractive Index on Composition in Co-Evaporated Films
Laser Induced Damage in Optical Materials: 1985