An exploratory thermal interface structure, made of vertically oriented carbon nanotubes directly grown on a silicon substrate, has been thermally characterized using a 3-omega method. The effective thermal conductivities of the carbon nanotubes (CNT) sample, including the effects of voids, are found to be to in the temperature range of to , one order higher than that of the best thermal greases or phase change materials. This result suggests that the vertically oriented CNTs potentially can be a promising next-generation thermal interface solution. However, fairly large thermal resistances were observed at the interfaces between the CNT samples and the experimental contact. Minimizing these contact resistances is critical for the application of these materials.
Skip Nav Destination
e-mail: jack.hu@intel.com
Article navigation
November 2006
This article was originally published in
Journal of Heat Transfer
Research Papers
3-Omega Measurements of Vertically Oriented Carbon Nanotubes on Silicon
X. Jack Hu,
X. Jack Hu
Mechanical Engineering Department,
e-mail: jack.hu@intel.com
Stanford Univeristy
, 440 Escondido Mall, Stanford, CA 94305
Search for other works by this author on:
Antonio A. Padilla,
Antonio A. Padilla
Mechanical Engineering Department,
Stanford Univeristy
, 440 Escondido Mall, Stanford, CA 94305
Search for other works by this author on:
Jun Xu,
Jun Xu
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, 585 Purdue Mall, West Lafayette, IN 47907
Search for other works by this author on:
Timothy S. Fisher,
Timothy S. Fisher
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, 585 Purdue Mall, West Lafayette, IN 47907
Search for other works by this author on:
Kenneth E. Goodson
Kenneth E. Goodson
Mechanical Engineering Department,
Stanford University
, 440 Escondido Mall, Stanford, CA 94305
Search for other works by this author on:
X. Jack Hu
Mechanical Engineering Department,
Stanford Univeristy
, 440 Escondido Mall, Stanford, CA 94305e-mail: jack.hu@intel.com
Antonio A. Padilla
Mechanical Engineering Department,
Stanford Univeristy
, 440 Escondido Mall, Stanford, CA 94305
Jun Xu
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, 585 Purdue Mall, West Lafayette, IN 47907
Timothy S. Fisher
School of Mechanical Engineering and Birck Nanotechnology Center,
Purdue University
, 585 Purdue Mall, West Lafayette, IN 47907
Kenneth E. Goodson
Mechanical Engineering Department,
Stanford University
, 440 Escondido Mall, Stanford, CA 94305J. Heat Transfer. Nov 2006, 128(11): 1109-1113 (5 pages)
Published Online: November 4, 2005
Article history
Received:
February 24, 2005
Revised:
November 4, 2005
Citation
Hu, X. J., Padilla, A. A., Xu, J., Fisher, T. S., and Goodson, K. E. (November 4, 2005). "3-Omega Measurements of Vertically Oriented Carbon Nanotubes on Silicon." ASME. J. Heat Transfer. November 2006; 128(11): 1109–1113. https://doi.org/10.1115/1.2352778
Download citation file:
Get Email Alerts
Cited By
Effect of Rib Blockage Ratio and Arrangements on Impingement Heat Transfer in Double-Wall Cooling
J. Heat Mass Transfer (September 2023)
Numerical Simulation of Mixed Convection Cooling of Electronic Component Within a Lid-Driven Cubic Cavity Filled With Nanofluid
J. Heat Mass Transfer (September 2023)
Experimental Analysis of the Influential Factors on Mixed Convection Flow in Horizontal Pipes
J. Heat Mass Transfer (September 2023)
The Effect of Biot Number on a Generalized Heat Conduction Solution
J. Heat Mass Transfer
Related Articles
Effects of Growth Temperature on Carbon Nanotube Array Thermal Interfaces
J. Heat Transfer (November,2008)
An Experimental Investigation in the Performance of Water-Filled Silicon Microheat Pipe Arrays
J. Electron. Packag (June,2010)
Application of Carbon Nanotubes to Thermal Interface Materials
J. Electron. Packag (June,2011)
Design of Thermal Interface Material With High Thermal Conductivity and Measurement Apparatus
J. Electron. Packag (March,2006)
Related Proceedings Papers
Related Chapters
Characterization of Ultra-High Temperature and Polymorphic Ceramics
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
Resistance Mythology
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Layer Arrangement Impact on the Electromechanical Performance of a Five-Layer Multifunctional Smart Sandwich Plate
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation