Curing is an important and time consuming step in the fabrication of thermosetting-matrix composite products. The use of embedded resistive heating elements providing supplemental heating from within the material being cured has been shown in previous studies (Ramakrishnan, Zhu, and Pitchumani, 2000, J. Manuf. Sci. Eng., 122, pp. 124–131; and Zhu and Pitchumani, 2000, Compos. Sci. Technol., 60, 2699–2712.) to offer significant improvements in cure cycle time and cure uniformity, due to the inside-out curing. This paper addresses the problem of determining the temperature and electrical current cycles, as well as the placement configuration of the conductive mats, for time-optimal curing of composites using embedded resistive heating elements. A continuous search simulated annealing optimization technique is utilized coupled with a numerical process simulation model to determine the optimal solutions for selected process constraints. Optimization results are presented over a range of material systems and different numbers of conductive mats to assess the effects of materials reactivity on the optimal number of conductive mats.
Optimal Temperature and Current Cycles for Curing of Composites Using Embedded Resistive Heating Elements
Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division March 21, 2001; revision received August 12, 2002. Associate Editor: A. F. Emery.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Mawardi , A., and Pitchumani, R. (January 29, 2003). "Optimal Temperature and Current Cycles for Curing of Composites Using Embedded Resistive Heating Elements ." ASME. J. Heat Transfer. February 2003; 125(1): 126–136. https://doi.org/10.1115/1.1527903
Download citation file:
- Ris (Zotero)
- Reference Manager