Heat transfer in a rotating rib-roughened duct was simulated with a Lagrangian dynamic subgrid-scale model. The angled 60 deg rib induced a pair of strong vortices in the stationary condition, and the heat transfer and the friction factor were larger than the 90 deg rib case. In the rotating condition, the high heat transfer areas at the midpoint between ribs and in front of the rib were observed only on the trailing wall. The friction factor and overall Nusselt number were decreased by the duct rotation for 60 deg rib case, although they were increased for 90 deg rib case.
Large Eddy Simulation of Turbulent Heat Transfer in an Orthogonally Rotating Square Duct With Angled Rib Turbulators
Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division December 11, 1999; revision received March 22, 2001. Associate Editor: J.-C. Han.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Murata, A., and Mochizuki, S. (March 22, 2001). "Large Eddy Simulation of Turbulent Heat Transfer in an Orthogonally Rotating Square Duct With Angled Rib Turbulators ." ASME. J. Heat Transfer. October 2001; 123(5): 858–867. https://doi.org/10.1115/1.1389463
Download citation file:
- Ris (Zotero)
- Reference Manager