Laser-induced melting and subsequent resolidification of a metal powder mixture consisting of low and high melting temperature materials was experimentally examined. First, the onset of melting for the low melting point material was determined and correlated with dimensionless parameters. Next, the morphologies of the heat affected zones were categorized and finally, a process map for use in rapid prototyping technology was developed. The results indicate a strong dependence of the system behavior on the laser-material coupling efficiency and in turn, the ratio of the laser beam radius to particle size.
An Experimental Investigation of Heat Affected Zone Formation and Morphology Development During Laser Processing of Metal Powder Mixtures
Contributed by the Heat Transfer Division for publication in the Journal of Heat Transfer. Manuscript received by the Heat Transfer Division June 26, 2000; revision received December 14, 2000. Associate Editor: T. Avedisian.
- Views Icon Views
- Share Icon Share
- Search Site
Buckley, C. W., and Bergman, T. L. (December 14, 2000). "An Experimental Investigation of Heat Affected Zone Formation and Morphology Development During Laser Processing of Metal Powder Mixtures ." ASME. J. Heat Transfer. June 2001; 123(3): 586–592. https://doi.org/10.1115/1.1370508
Download citation file:
- Ris (Zotero)
- Reference Manager