Attempts have recently been made to numerically simulate film boiling on a horizontal surface. It has been observed from experiments and numerical simulations that during film boiling the bubbles are released alternatively at the nodes and antinodes of a Taylor wave. Near the critical state, however, hydrodynamic transition in bubble release pattern has been reported in the literature. The purpose of this work is to understand the mechanism of the transition in bubble release pattern through complete numerical simulation of the evolution of the vapor-liquid interface. The interface is captured by a level set method which is modified to include the liquid-vapor phase change effect. It is found from the numerical simulation that at low wall superheats the interface moves upwards, bubbles break off, and the interface drops down alternatively at the nodes and antinodes. However, with an increase in wall superheat, stable vapor jets are formed on both the nodes and antinodes and bubbles are released from the top of the vapor columns. The numerical results are compared with the experimental data, and visual observations reported in the literature are found to be in good agreement with the data.
Skip Nav Destination
e-mail: vdhir@seas.ucla.edu
Article navigation
Research Papers
Numerical Simulation of Film Boiling Near Critical Pressures With a Level Set Method
G. Son,
G. Son
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, 400 Westwood Plaza, Box 95197, Los Angeles, CA 90095-1597
Search for other works by this author on:
V. K. Dhir
V. K. Dhir
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, 400 Westwood Plaza, Box 95197, Los Angeles, CA 90095-1597
e-mail: vdhir@seas.ucla.edu
Search for other works by this author on:
G. Son
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, 400 Westwood Plaza, Box 95197, Los Angeles, CA 90095-1597
V. K. Dhir
Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, 400 Westwood Plaza, Box 95197, Los Angeles, CA 90095-1597
e-mail: vdhir@seas.ucla.edu
J. Heat Transfer. Feb 1998, 120(1): 183-192 (10 pages)
Published Online: February 1, 1998
Article history
Received:
May 15, 1997
Revised:
August 28, 1997
Online:
January 7, 2008
Citation
Son, G., and Dhir, V. K. (February 1, 1998). "Numerical Simulation of Film Boiling Near Critical Pressures With a Level Set Method." ASME. J. Heat Transfer. February 1998; 120(1): 183–192. https://doi.org/10.1115/1.2830042
Download citation file:
Get Email Alerts
Cited By
Related Articles
An Experimental Study of Subcooled Film Boiling on a Vertical Surface—Hydrodynamic Aspects
J. Heat Transfer (February,1992)
Numerical Simulation of Saturated Film Boiling on a Horizontal Surface
J. Heat Transfer (August,1997)
An Experimental Study of Subcooled Film Boiling on a Vertical Surface—Thermal Aspects
J. Heat Transfer (February,1992)
Steady-State Subcooled Nucleate Boiling on a Downward-Facing Hemispherical Surface
J. Heat Transfer (May,1998)
Related Proceedings Papers
Related Chapters
Numerical Simulation of Collapsing Vapor Bubble Clusters Close to a Rigid Wall
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Multiphase Flow Simulations of Sediment Particles in Mixed-flow Pumps
Mixed-flow Pumps: Modeling, Simulation, and Measurements
Large Eddy Simulation of a Collapsing Vapor Bubble Containing Non-Condensable Gas
Proceedings of the 10th International Symposium on Cavitation (CAV2018)