Heat transfer measurements were made during nucleate boiling of R-113 from a bundle of 15 electrically heated, copper TURBO-B tubes arranged in an equilateral triangular pitch, designed to simulate a portion of a flooded evaporator. Five of the tubes that were oriented in a vertical array on the centerline of the bundle were each instrumented with six wall thermocouples. For increasing heat flux, the incipient boiling wall superheat of upper tubes decreased as lower tubes were activated. In the boiling region at low heat fluxes (≈ 1 kW/m2), the average bundle heat transfer coefficient was 4.6 times that obtained for a smooth tube bundle (under identical conditions) and 1.6 times greater than that obtained for a single TURBO-B tube; a similar bundle factor has been reported for a smooth tube bundle. At high heat fluxes (100 kW/m2), the average bundle heat transfer coefficient was 3.6 times that of a smooth tube bundle. Furthermore, there was still a significant bundle factor (1.22), contrary to a smooth tube bundle, where all effect of lower tubes was eliminated at high heat fluxes.
Skip Nav Destination
Article navigation
Research Papers
Nucleate Pool Boiling of a TURBO-B Bundle in R-113
S. B. Memory,
S. B. Memory
Department of Mechanical Engineering, University of Miami, Coral Gables, FL 33124
Search for other works by this author on:
S. V. Chilman,
S. V. Chilman
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93940
Search for other works by this author on:
P. J. Marto
P. J. Marto
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93940
Search for other works by this author on:
S. B. Memory
Department of Mechanical Engineering, University of Miami, Coral Gables, FL 33124
S. V. Chilman
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93940
P. J. Marto
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93940
J. Heat Transfer. Aug 1994, 116(3): 670-678 (9 pages)
Published Online: August 1, 1994
Article history
Received:
February 1, 1993
Revised:
August 1, 1993
Online:
May 23, 2008
Citation
Memory, S. B., Chilman, S. V., and Marto, P. J. (August 1, 1994). "Nucleate Pool Boiling of a TURBO-B Bundle in R-113." ASME. J. Heat Transfer. August 1994; 116(3): 670–678. https://doi.org/10.1115/1.2910921
Download citation file:
Get Email Alerts
Cited By
Related Articles
Nucleate Boiling Characteristics of R-113 in a Small Tube Bundle
J. Heat Transfer (May,1992)
Nucleate Pool Boiling Heat Transfer Coefficients of Distilled Water (H 2 O) and R-134a/Oil Mixtures From Rib-Roughened Surfaces
J. Heat Transfer (February,1997)
Photographic Study of Nucleate Pool Boiling on a Horizontal Surface
J. Heat Transfer (February,1965)
Inverse Determination of the Local Heat Transfer Coefficients for
Nucleate Boiling on a Horizontal Cylinder
J. Heat Transfer (December,2003)
Related Proceedings Papers
Related Chapters
Fire Safety Test Furnace Characterization Unit
Thermal Measurements: The Foundation of Fire Standards
Threshold Functions
Closed-Cycle Gas Turbines: Operating Experience and Future Potential