Vapor explosions are believed to be triggered by the rapid collapse of film boiling of coolant in contact with molten fuel, probably due to local pressure waves from an initially small interaction. In Part I of this work the heat transfer during the first two ms after passage of a shock past a hot nickel tube surrounded by subcooled Freon-113 or ethanol was studied. The following important results were obtained: (1) The peak heat flux exhibits a maximum of a heater surface temperature of 280–350° C, depending upon the strength of the shock. This is well above the critical temperature, so that nucleation considerations are irrelevant. (2) The maximum of the peak heat flux envelope depends upon the shock ΔP, indicating that only partial contact is made upon collapse of the vapor film. (3) The collapse is rapid (1–2 frame at 5000 f/s), and is produced by relatively weak shocks (ΔP = 2–3 atm.). In the present work, the vapor film collapse is studied analytically, in order to obtain additional insight into the mechanism. A Lagrangian transformation due to Hamill and Bankoff is introduced to immobilize the moving boundary, and a polynomial temperature distribution in the transformed mass variable is assumed in the vapor region, as well as in the liquid region. This leads to a set of coupled nonlinear ordinary differential equations in the three regions, which are solved numerically. Two models were developed: (1) A detailed model, taking into account the Knudsen layers at the vapor-liquid and vapor-solid interfaces, and (2) a simplified model, in which these layers were neglected, and a linear temperature profile in the Lagrangian vapor phase variable was assumed. It is found that the initial vapor mass is a key variable determining whether collapse is achieved. In practice, this is a stochastic variable due to bubble departure, which explains the observed heat flux data scatter. The analytical results are in general agreement with the experimental data.
Skip Nav Destination
Article navigation
Research Papers
Destabilization of Film Boiling Due to Arrival of a Pressure Shock: Part II—Analytical
A. Inoue,
A. Inoue
Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, O-okayama, Meguro-ku, Japan
Search for other works by this author on:
A. Ganguli,
A. Ganguli
Chemical Engineering Department, Northwestern University, Evanston, Ill. 60201
Search for other works by this author on:
S. G. Bankoff
S. G. Bankoff
Chemical Engineering Department, Northwestern University, Evanston, Ill. 60201
Search for other works by this author on:
A. Inoue
Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, O-okayama, Meguro-ku, Japan
A. Ganguli
Chemical Engineering Department, Northwestern University, Evanston, Ill. 60201
S. G. Bankoff
Chemical Engineering Department, Northwestern University, Evanston, Ill. 60201
J. Heat Transfer. Aug 1981, 103(3): 465-471 (7 pages)
Published Online: August 1, 1981
Article history
Received:
November 7, 1980
Online:
October 20, 2009
Citation
Inoue, A., Ganguli, A., and Bankoff, S. G. (August 1, 1981). "Destabilization of Film Boiling Due to Arrival of a Pressure Shock: Part II—Analytical." ASME. J. Heat Transfer. August 1981; 103(3): 465–471. https://doi.org/10.1115/1.3244487
Download citation file:
Get Email Alerts
Cited By
Thermal Anisotropy and Heat Flux Deviation Degree of Composites
J. Heat Mass Transfer (May 2025)
Associate Editor's Recognition
J. Heat Mass Transfer (May 2025)
Related Articles
Destabilization of Film Boiling Due to Arrival of a Pressure Shock—Part I: Experimental
J. Heat Transfer (August,1981)
Study of Subcooled Film Boiling on a Horizontal Disc: Part 2—Experiments
J. Heat Transfer (April,2001)
Modeling Subcooled Flow Film Boiling in a Vertical Tube
J. Thermal Sci. Eng. Appl (June,2010)
A Leidenfrost Point Model for Impinging Droplets and Sprays
J. Heat Transfer (April,2004)
Related Proceedings Papers
Related Chapters
Experimental Investigation on Destructive Potential of Shock-Induced Bubble Collapse
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Natural Gas Transmission
Pipeline Design & Construction: A Practical Approach, Third Edition
Dynamic Behavior of Pumping Systems
Pipeline Pumping and Compression Systems: A Practical Approach