Abstract
This paper documents the customization of a direct shear apparatus to accommodate heat injection into a polymer-bonded sand (PBS) specimen while in the shear box (i.e., before, during, or after shearing). The system is controlled with an electronic microcontroller that is coded to enable tailored heat treatment protocols and data logging in the temperature range between 110°C and 160°C. The use of the system is exemplified with experiments aimed to characterize the strength of PBS specimens subjected to multiple heating—and thus multiple healing—cycles.
Issue Section:
Technical Notes
References
1.
Amatya
, B. L.
, Soga
, K.
, Bourne-Webb
, P. J.
, Amis
, T.
, and Laloui
, L.
, 2012
, “Thermo-Mechanical Behaviour of Energy Piles
,” Géotechnique
, Vol. 62
, No. 6
, pp. 503
–519
, https://doi.org/10.1680/geot.10.P.1162.
Brandl
, H.
, 2006
, “Energy Foundations and Other Thermo-Active Ground Structures
,” Géotechnique
, Vol. 56
, No. 2
, pp. 81
–122
, https://doi.org/10.1680/geot.2006.56.2.813.
Burghignoli
, A.
, Desideri
, A.
, and Miliziano
, S.
, 2000
, “A Laboratory Study on the Thermomechanical Behaviour of Clayey Soils
,” Can. Geotech. J.
, Vol. 37
, No. 4
, pp. 764
–780
, https://doi.org/10.1139/t00-0104.
Cekerevac
, C.
, Laloui
, L.
, and Vulliet
, L.
, 2005
, “A Novel Triaxial Apparatus for Thermo-Mechanical Testing of Soils
,” Geotech. Test. J.
, Vol. 28
, No. 2
, pp. 161
–170
, https://doi.org/10.1520/GTJ123115.
Cestari
, S. P.
, Mendes
, L. C.
, França de Silva
, D.
, Chimanowsky
, J. P.
, Jr., Altstädt
, V.
, Demchuk
, V.
, Lang
, A.
, Leonhardt
, R. G.
, and Keller
, J.-H.
, 2013
, “Properties of Recycled High Density Polyethylene and Coffee Dregs Composites
,” Polímeros
, Vol. 23
, No. 6
, pp. 733
–737
.6.
Cui
, Y.-J.
, Le
, T. T.
, Tang
, A. M.
, Delage
, P.
, and Li
, X. L.
, 2009
, “Investigating the Time-Dependent Behaviour of Boom Clay under Thermomechanical Loading
,” Géotechnique
, Vol. 59
, No. 4
, pp. 319
–329
, https://doi.org/10.1680/geot.2009.59.4.3197.
Delage
, P.
, Sultan
, N.
, and Cui
, Y.-J.
, 2000
, “On the Thermal Consolidation of Boom Clay
,” Can. Geotech. J.
, Vol. 37
, No. 2
, pp. 343
–354
, https://doi.org/10.1139/t99-1058.
Fragaszy
, R. J.
, Santamarina
, J. C.
, Amekudzi
, A.
, Assimaki
, D.
, Bachus
, R.
, Burns
, S. E.
, Cha
, M.
, Cho
, G. C.
, Cortes
, D. D.
, Dai
, S.
, Espinoza
, D. N.
, Garrow
, L.
, Huang
, H.
, Jang
, J.
, Jung
, J. W.
, Kim
, S.
, Kurtis
, K.
, Lee
, C.
, Pasten
, C.
, Phadnis
, H.
, Rix
, G.
, Shin
, H. S.
, Torres
, M. C.
, and Tsouris
, C.
, 2011
, “Sustainable Development and Energy Geotechnology—Potential Roles for Geotechnical Engineering
,” KSCE J. Civ. Eng.
, Vol. 15
, No. 4
, pp. 611
–621
, https://doi.org/10.1007/s12205-011-0102-79.
Garcia
, N. F.
, Valdes
, J. R.
, and Cortes
, D. D.
, 2015
, “Strength Characteristics of Polymer-Bonded Sands
,” Géotechnique Lett.
, Vol. 5
, No. 3
, pp. 212
–216
, https://doi.org/10.1680/jgele.15.0008910.
Goodship
, V.
, 2007
, Introduction to Plastics Recycling
, Smithers Rapra
, Shawbury, UK
, pp. 11
–18
.11.
Graham
, J.
, Tanaka
, N.
, Crilly
, T.
, and Alfaro
, M.
, 2001
, “Modified Cam-Clay Modelling of Temperature Effects in Clays
,” Can. Geotech. J.
, Vol. 38
, No. 3
, pp. 608
–621
, https://doi.org/10.1139/t00-12512.
Hough
, B. K.
, 1957
, Basic Soils Engineering
, Ronald Press Co.
, New York, NY
, pp. 20
–30
.13.
Hueckel
, T.
and Baldi
, G.
, 1990
, “Thermoplasticity of Saturated Clays: Experimental Constitutive Study
,” J. Geotech. Eng.
, Vol. 116
, No. 12
, pp. 1778
–1796
, https://doi.org/10.1061/(ASCE)0733-9410(1990)116:12(1778)14.
Jacobson
, D. E.
, Valdes
, J. R.
, and Evans
, T. M.
, “A Numerical View into Direct Shear Specimen Size Effects
,” Geotech. Test. J.
, Vol. 30
, No. 6
, 2007
, pp. 512
–516
, https://doi.org/10.1520/GTJ10092315.
Kaye
, G. W. C.
and Laby
, T. H.
, 2008
, “Tables of Physical and Chemical Constants
,” National Physical Laboratory, https://web.archive.org/web/20140704061930/https://www.kayelaby.npl.co.uk/16.
Kuntiwattanakul
, P.
, Towhata
, I.
, Ohishi
, K.
, and Seko
, I.
, 1995
, “Temperature Effects on Undrained Shear Characteristics of Clay
,” Soils Foundations
, Vol. 35
, No. 1
, pp. 147
–162
, https://doi.org/10.3208/sandf1972.35.14717.
Mitchell
, J. K.
and Soga
, K.
, 2005
, Fundamentals of Soil Behavior
, John Wiley and Sons, Inc.
, Hoboken, NJ
, pp. 369
–462
.18.
Nicholson
, J. W.
, 2006
, The Chemistry of Polymers
, Royal Society of Chemistry
, Cambridge, UK
, pp. 6
–7
.19.
Rascon De Lira
, R.
, Cortes
, D. D.
, and Pasten
, C.
, “Reclaimed Asphalt Binder Aging and Its Implications in the Management of RAP Stockpiles
,” Constr. Build. Mater.
, Vol. 101
, 2015
, pp. 611
–616
, https://doi.org/10.1016/j.conbuildmat.2015.10.12520.
Romero
, E.
, Lloret
, A.
, and Gens
, A.
, 1995
, “Development of a New Suction and Temperature Controlled Oedometer Cell
,” presented at the First International Conference on Unsaturated Soils
, Paris, France, A. A. Balkema
, Rotterdam, The Netherlands
, pp. 553
–559
.21.
Romero
, L.
, 2016
, “Mechanical Characterization of Polymer Bonded Sands
,” M.S. thesis, New Mexico State University
, Las Cruces, NM.22.
Santamarina
, J. C.
, Klein
, K. A.
, and Fam
, M. A.
, 2001
, Soils and Waves: Particulate Materials Behavior, Characterization and Process Monitoring
, John Wiley and Sons, Inc.
, Hoboken, NJ
, pp. 103
–158
.23.
Satapathy
, S.
, Nag
, A.
, and Nando
, G. B.
, 2012
, “Effect of Electron Beam Irradiation on the Mechanical, Thermal and Dynamic Mechanical Behaviour of Waste Polyethylene-Short PET Fibre Composites
,” Polym. Polym. Compos.
, Vol. 20
, No. 7
, pp. 647
–657
.24.
Savvidou
, C.
and Britto
, A. M.
, 1995
, “Numerical and Experimental Investigation of Thermally Induced Effects in Saturated Clay
,” Soils Foundations
, Vol. 35
, No. 1
, pp. 37
–44
, https://doi.org/10.3208/sandf1972.35.3725.
Towhata
, I.
, Kuntiwattanaku
, P.
, Seko
, I.
, and Ohishi
, K.
, 1993
, “Volume Change of Clays Induced by Heating As Observed in Consolidation Tests
,” Soils Foundations
, Vol. 33
, No. 4
, pp. 170
–183
, https://doi.org/10.3208/sandf1972.33.4_17026.
Valdes
, J. R.
and Cortes
, D. D.
, 2014
, “Heat-Induced Bonding of Sands
,” presented at Geo-Congress 2014
, Atlanta, GA, ASCE
, Reston, VA
, pp. 3721
–3733
.27.
Vasile
, C.
and Pascu
, M.
, 2005
, Practical Guide to Polyethylene
, Smithers Rapra
, Shawbury, UK
, pp. 31
–84
.28.
Yasufuku
, N.
, Springman
, S. M.
, Arenson
, L. U.
, and Ramholt
, T.
, 2003
, “Stress-Dilatancy Behaviour of Frozen Sand in Direct Shear
,” presented at the Eighth International Conference on Permafrost
, Zurich, Switzerland
, International Permafrost Association
, Svalbard, Norway
, pp. 1253
–1258
.29.
Yavari
, N.
, Tang
, A. M.
, Pereira
, J.-M.
, and Hassen, G., 2016
, “Effect of Temperature on the Shear Strength of Soils and the Soil–Structure Interface
,” Can. Geotech. J.
, Vol. 53
, No. 7
, pp. 1186
–1194
.
This content is only available via PDF.
All rights reserved. This material may not be reproduced or copied, in whole or part, in any printed, mechanical, electronic, film, or other distribution and storage media, without the written consent of ASTM International.
You do not currently have access to this content.