Abstract

A polyaxial loading system was designed and developed at Indian Institute of Technology Delhi, India for laboratory testing of mechanical behavior of rock mass. The large-scale rock mass models of different joint geometry can be tested under polyaxial stress state simulating in situ stress conditions using this true-triaxial system. The system consists of a 1000 kN capacity vertical frame, a biaxial frame of 300 kN capacity fitted with two pairs of hydraulic jacks and platens, constant confining pressure unit for applying, monitoring, and maintaining horizontal stresses (σ2 and σ3) on specimen faces, eight-channel data acquisition system, and a personal computer to record all load and deformation data. Its working was verified by conducting true-triaxial testing on several models specimens of sand-lime blocks having three sets of orthogonal joints.

References

1.
Alsayed
,
M. I.
,
2002
, “
Utilising the Hoek Triaxial Cell for Multiaxial Testing of Hollow Rock Cylinders
,”
Int. J. Rock Mech. Min. Sci.
 1365-1609, Vol.
39
, pp.
355
366
.
2.
Bobet
,
A.
, and
Einstein
,
H. H.
,
1998
, “
Fracture Coalescence in Rock-Type Materials Under Uniaxial and Biaxial Compression
,”
Int. J. Rock Mech. Min. Sci.
 1365-1609, Vol.
35
, No.
7
, pp.
863
883
.
3.
Deere
,
D. U.
, and
Miller
,
R. P.
,
1966
, “
Engineering Classification and Index Properties for Intact Rock
,” Technical Report No. AFNL-TR-65-116, Air Force Weapons Laboratory, New Mexico.
4.
Haimson
,
B.
, and
Chang
,
C.
,
2000
, “
A New True Triaxial Cell for Testing Mechanical Properties of Rock and Its Use to Determine Rock Strength and Deformability of Westerly Granite
,”
Int. J. Rock Mech. Min. Sci.
 1365-1609, Vol.
37
, pp.
285
296
.
5.
Hoek
,
E.
,
2002
,
Practical Rock Engineering
, 2002 Ed.,
Rocscience, Inc.
,
Toronto, ON, Canada
http://www.rockscience.com/Hoek/Hoek.asp.
6.
ISRM
,
1981
,
Rock Characterization, Testing and Monitoring
, ISRM Suggested Methods,
Brown
E. T.
, Ed.,
Pergamon Press
,
New York
.
7.
Nag
,
C. P. N.
,
1982
, “
Soil Cement Characterisation Under Cyclic Loading in General Stress System
,” Ph.D. Thesis,
IIT Delhi
.
8.
Natau
,
O.
,
Fliege
,
O.
,
Mutschler
,
TH.
, and
Stech
,
H. J.
,
1995
, “
True Triaxial Test of Prismatic Large Scale Samples of Jointed Rock Masses in Laboratory
,”
Proc. 8th Int. Cong. ISRM
,
Tokyo
, pp.
353
358
.
9.
Ramamurthy
,
T.
,
1970
, “
A Universal Triaxial Apparatus
,”
J. Indian Nat. Soc. SMFE
, Vol.
9
, No.
3
, pp.
251
269
.
10.
Rao
,
K. S.
,
Tiwari
,
R. P.
,
Kapoor
,
N.
,
Reddy
,
V.
, and
Kamlakar
,
M.
,
2002
, “
Strength Response of Jointed Model Materials under Biaxial Stress Condition
,”
Proc. IGC 2002
, 19–21 December 2002, Allahabad, India, Vol.
1
, pp.
451
454
.
11.
Singh
,
B.
,
Goel
,
R. K.
,
Meherotra
,
V. K.
,
Garg
,
S. K.
, and
Allu
,
M. R.
,
1998
, “
Effect of Intermediate Principal Stress on Strength of Anisotropic Rock Mass
,”
Tunneling and Underground Space Technology
, Vol.
13
, No.
1
, pp.
71
79
.
12.
Singh
,
M.
,
Rao
,
K. S.
, and
Ramamurthy
,
T.
,
2002
, “
Strength and Deformational Behaviour of a Jointed Rock Mass
,”
Rock Mech. Rock Eng.
 0723-2632 https://doi.org/10.1007/s006030200008, Vol.
35
, No.
1
, pp.
45
64
.
13.
Tiwari
,
R. P.
, and
Rao
,
K. S.
,
2004
, “
Physical Modeling of a Rock Mass Under a True-Triaxial Stress State
,”
Int. J. Rock Mech. Min. Sci.
 1365-1609, Vol.
41
, Supple. 1, pp.
396
401
.
14.
Tiwari
,
R. P.
, and
Rao
,
K. S.
,
2006
, “
Deformability Characteristic of a Rock Mass Under True Triaxial Stress Compression
,”
Geotech. Geologic. Eng.
 0960-3182, Vol.
24
, No.
4
, pp.
1039
1063
.
15.
Tiwari
,
R. P.
, and
Rao
,
K. S.
,
2006
, “
Post Failure Behaviour of a Rock Mass Under the Influence of Triaxial and True Triaxial Confinements
,”
Int. Jl. Engineering Geology
, Vol.
84
, No.
3–4
, pp.
112
129
.
16.
Tiwari
,
R. P.
, and
Rao
,
K. S.
,
2007
, “
Response of an Anisotropic Rock Mass Under Polyaxial Stress State
,”
J. Mater. Civ. Eng.
 0899-1561 https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(393), Vol.
19
, No.
5
, 2007, pp.
393
403
.
17.
Tyagi
,
A. K.
,
Rao
,
K. S.
, and
Gupta
,
A. S.
,
1999
, “
Behaviour of Jointed Model Material Under Biaxial Compression
,”
Proc. Int. Symp. on Slope Stability Engineering
, 8–11 Nov. 1999,
Japan
, Vol.
1
, pp.
805
808
.
This content is only available via PDF.
You do not currently have access to this content.