Skip Nav Destination
Issues
January 1980
This article was originally published in
Journal of Engineering for Power
ISSN 0022-0825
In this Issue
Research Papers
A System Approach to the Evaluation of a Gas Turbine Driven Compressor
J. Eng. Power. January 1980, 102(1): 1–4.
doi: https://doi.org/10.1115/1.3230223
Topics:
Compressors
,
Gas turbines
Experimental and Analytical Investigation of the Effects of Reynolds Number and Blade Surface Roughness on Multistage Axial Flow Compressors
J. Eng. Power. January 1980, 102(1): 5–12.
doi: https://doi.org/10.1115/1.3230232
Measured Effects of Flow Leakage on the Performance of the GT-225 Automotive Gas Turbine Engine
J. Eng. Power. January 1980, 102(1): 14–18.
doi: https://doi.org/10.1115/1.3230214
Topics:
Automotive gas turbines
,
Engines
,
Flow (Dynamics)
,
Leakage
,
Turbines
,
Temperature
,
Fuel consumption
,
Nozzles
,
Compressors
,
Design
Acoustics and Performance of High-Speed, Unequally Spaced Fan Rotors
J. Eng. Power. January 1980, 102(1): 19–27.
doi: https://doi.org/10.1115/1.3230222
Topics:
Acoustics
,
Rotors
,
Blades
,
Sound pressure
,
Computational methods
,
Decibels
,
Inlet guide vanes
,
Pressure
Axial-Flow Compressor Turning Angle and Loss by Inviscid-Viscous Interaction Blade-to-Blade Computation
J. Eng. Power. January 1980, 102(1): 28–34.
doi: https://doi.org/10.1115/1.3230228
The Combined Reheat Gas Turbine/Steam Turbine Cycle: Part I—A Critical Analysis of the Combined Reheat Gas Turbine/Steam Turbine Cycle
J. Eng. Power. January 1980, 102(1): 35–41.
doi: https://doi.org/10.1115/1.3230229
Topics:
Cycles
,
Gas turbines
,
Steam turbines
,
Firing
,
Power stations
,
Temperature
,
Boilers
,
Generators
,
Heat recovery
,
Industrial research
The Combined Reheat Gas Turbine/Steam Turbine Cycle: Part II—The LM 5000 Gas Generator Applied to the Combined Reheat Gas Turbine/Steam Turbine Cycle
J. Eng. Power. January 1980, 102(1): 42–49.
doi: https://doi.org/10.1115/1.3230230
Topics:
Cycles
,
Gas turbines
,
Generators
,
Steam turbines
,
Steam
,
Boilers
,
Combined cycles
,
Combustion
,
Fuels
,
Heat
Mean Velocity and Decay Characteristics of the Guidevane and Stator Blade Wake of an Axial Flow Compressor
J. Eng. Power. January 1980, 102(1): 50–60.
doi: https://doi.org/10.1115/1.3230231
Topics:
Axial flow
,
Blades
,
Stators
,
Wakes
,
Inlet guide vanes
,
Compressors
,
Centrifugal force
,
Flow (Dynamics)
,
Noise (Sound)
,
Pressure gradient
Augmented Vectored Thrust Engines and the Problem of Avoiding Hot Gas Recirculation
J. Eng. Power. January 1980, 102(1): 61–67.
doi: https://doi.org/10.1115/1.3230235
Topics:
Engines
,
Thrust
,
Aircraft
,
Propulsion systems
,
Exhaust gas recirculation
,
Power stations
,
Test facilities
,
Warfare
Computation of Supercritical Compressor and Turbine Cascades with a Design Method for Transonic Flows
J. Eng. Power. January 1980, 102(1): 68–74.
doi: https://doi.org/10.1115/1.3230236
Topics:
Compressors
,
Computation
,
Design methodology
,
Transonic flow
,
Turbines
,
Blades
,
Boundary-value problems
,
Cascades (Fluid dynamics)
,
Deflection
,
Density
Influence of Freely Rotating Inlet Guide Vanes on the Return Flows and Stable Operating Range of an Axial Flow Fan
J. Eng. Power. January 1980, 102(1): 75–80.
doi: https://doi.org/10.1115/1.3230237
Topics:
Axial flow
,
Flow (Dynamics)
,
Inlet guide vanes
,
Rotors
,
Guide vanes
,
Performance characterization
,
Shapes
,
Vortices
An Experimental Investigation of Film Cooling on a Turbine Rotor Blade
J. Eng. Power. January 1980, 102(1): 81–87.
doi: https://doi.org/10.1115/1.3230238
Topics:
Blades
,
Film cooling
,
Rotors
,
Turbines
,
Coolants
,
Flat plates
,
Pressure
,
Suction
,
Trajectories (Physics)
,
Airfoils
Study of Mean- and Turbulent-Velocity Fields in a Large-Scale Turbine-Vane Passage
J. Eng. Power. January 1980, 102(1): 88–95.
doi: https://doi.org/10.1115/1.3230239
Topics:
Turbines
,
Turbulence
,
Boundary layers
,
Vortices
,
Blades
,
Flow (Dynamics)
,
Inlet guide vanes
,
Lasers
,
Stress
Use of the Characteristic Method for the Prediction of the Three-Dimensional Flow Field in High Transonic Compressors
J. Eng. Power. January 1980, 102(1): 96–103.
doi: https://doi.org/10.1115/1.3230240
Topics:
Compressors
,
Flow (Dynamics)
,
Blades
,
Cascades (Fluid dynamics)
,
Axial flow
,
Pressure gradient
Gas Turbine Bucket Corrosion Protection Developments
J. Eng. Power. January 1980, 102(1): 104–112.
doi: https://doi.org/10.1115/1.3230203
Application of Abrasive Coatings to Clearance Control in the Gas Turbine
J. Eng. Power. January 1980, 102(1): 113–119.
doi: https://doi.org/10.1115/1.3230204
Topics:
Clearances (Engineering)
,
Coatings
,
Gas turbines
,
Compressors
,
Rotors
,
Abrasives
,
Damage
,
Engines
,
Failure
,
Flames
Design and Application of a Single Gas Turbine Matched with Two Tandem Driven Centrifugal Compressors
J. Eng. Power. January 1980, 102(1): 120–123.
doi: https://doi.org/10.1115/1.3230205
Topics:
Compressors
,
Design
,
Gas turbines
,
High pressure (Physics)
,
Pressure
,
Storage
,
Turbines
Field Testing and Modifications of Pipeline Compression Equipment
J. Eng. Power. January 1980, 102(1): 124–127.
doi: https://doi.org/10.1115/1.3230206
Topics:
Compression
,
Pipelines
,
Testing
Fatigue Strength of Silicon Nitride for High-Speed Rolling Bearings
J. Eng. Power. January 1980, 102(1): 128–131.
doi: https://doi.org/10.1115/1.3230207
Topics:
Fatigue strength
,
Rolling bearings
,
Silicon nitride ceramics
Application of Gas Turbine/Compressors in LNG Plants
J. Eng. Power. January 1980, 102(1): 132–135.
doi: https://doi.org/10.1115/1.3230209
Topics:
Compressors
,
Gas turbines
,
Liquefied natural gas
,
Refrigeration
,
Turbochargers
Design and Closed Loop Testing of High-Pressure Centrifugal Gas Compressors for the Suppression of Subsynchronous Vibration
J. Eng. Power. January 1980, 102(1): 136–140.
doi: https://doi.org/10.1115/1.3230210
Topics:
Design
,
Gas compressors
,
High pressure (Physics)
,
Testing
,
Vibration
,
Rotors
,
Bearings
,
Dampers
,
Excitation
,
Geometry
Aerodynamic Design of Fixed and Variable Geometry Nozzleless Turbine Casings
J. Eng. Power. January 1980, 102(1): 141–147.
doi: https://doi.org/10.1115/1.3230212
Topics:
Design
,
Geometry
,
Turbines
,
Wheels
,
Blades
,
Design methodology
,
Excitation
,
Flow (Dynamics)
,
Friction
,
Pressure
Study of Metals Erosion in High Temperature Coal Gas Streams
J. Eng. Power. January 1980, 102(1): 148–152.
doi: https://doi.org/10.1115/1.3230213
Topics:
Coal
,
Erosion
,
High temperature
,
Metals
,
Alloys
,
Turbines
,
Stainless steel
,
Temperature
,
Temperature effects
,
Testing
Application of Recuperative Gas Cycles with a Bypass Heat Generator to Solar Energy Power Plants
J. Eng. Power. January 1980, 102(1): 153–159.
doi: https://doi.org/10.1115/1.3230215
Topics:
Cycles
,
Generators
,
Heat
,
Power stations
,
Solar energy
,
Combined cycles
,
Combined heat and power
,
Energy conversion
,
Energy storage
,
Gas turbines
A Simple Solar Gas Turbine Plant
J. Eng. Power. January 1980, 102(1): 160–161.
doi: https://doi.org/10.1115/1.3230216
Topics:
Gas turbines
,
Solar energy
,
Heat
,
Pressure
,
Solar power
,
Storage
,
Storage tanks
,
Sunlight
Surge-Induced Structural Loads in Gas Turbines
J. Eng. Power. January 1980, 102(1): 162–168.
doi: https://doi.org/10.1115/1.3230217
Topics:
Gas turbines
,
Stress
,
Surges
,
Engines
,
Pressure
,
Compression
,
Air flow
,
Axial flow
,
Cycles
,
Engine design
Blade-Row Interaction in an Axial-Flow Subsonic Compressor Stage
J. Eng. Power. January 1980, 102(1): 169–177.
doi: https://doi.org/10.1115/1.3230218
Topics:
Axial flow
,
Blades
,
Compressors
,
Rotors
,
Wakes
,
Flow (Dynamics)
,
Guide vanes
,
Mach number
,
Pressure
,
Probes
The Effects of Some Design Parameters of an Isolated Rotor on Inlet Flow Distortions
J. Eng. Power. January 1980, 102(1): 178–186.
doi: https://doi.org/10.1115/1.3230219
Topics:
Design
,
Flow (Dynamics)
,
Rotors
,
Blades
,
Wavelength
,
Geometry
Conceptual Design of an 80,000-shp Fossil-Fired Closed-Cycle Helium Turbine Propulsion System for Naval Ship Applications
J. Eng. Power. January 1980, 102(1): 187–192.
doi: https://doi.org/10.1115/1.3230220
Topics:
Conceptual design
,
Cycles
,
Helium
,
Propulsion systems
,
Ships
,
Turbines
,
Propulsion
,
Engines
,
Computer software
,
Design
Viscous Flow Analysis in Mixed Flow Rotors
J. Eng. Power. January 1980, 102(1): 193–201.
doi: https://doi.org/10.1115/1.3230221
Topics:
Flow (Dynamics)
,
Rotors
,
Viscous flow
,
Blades
,
Turbomachinery
,
Channels (Hydraulic engineering)
,
Compressors
,
Inflow
,
Laminar flow
,
Navier-Stokes equations
Nonlinear Dynamic Model of a Fluidized-Bed Steam Generation System
J. Eng. Power. January 1980, 102(1): 202–208.
doi: https://doi.org/10.1115/1.3230224
Topics:
Dynamic models
,
Fluidized beds
,
Steam
,
Design
,
Transients (Dynamics)
,
Air flow
,
Atmospheric pressure
,
Coal
,
Computer simulation
,
Control equipment
On Flame Stabilization by Bluff-Bodies
J. Eng. Power. January 1980, 102(1): 209–214.
doi: https://doi.org/10.1115/1.3230225
Generalized Parameters for Selection of Turbines and Working Fluids for OTEC Power Systems
J. Eng. Power. January 1980, 102(1): 215–222.
doi: https://doi.org/10.1115/1.3230226
Topics:
Fluids
,
Ocean thermal energy conversion
,
Power systems (Machinery)
,
Turbines
,
Design
,
Blades
,
Cycles
,
Economics
,
Exhaust systems
,
Generators
Discussions
Discussion: “Experimental and Analytical Investigation of the Effects of Reynolds Number and Blade Surface Roughness on Multistage Axial Flow Compressors” (Scha¨ffler, A., 1980, ASME J. Eng. Power, 102, pp. 5–12)
J. Eng. Power. January 1980, 102(1): 12.
doi: https://doi.org/10.1115/1.3230208
Topics:
Axial flow
,
Blades
,
Compressors
,
Reynolds number
,
Surface roughness
Closure to “Discussion of ‘Experimental and Analytical Investigation of the Effects of Reynolds Number and Blade Surface Roughness on Multistage Axial Flow Compressors’” (1980, ASME J. Eng. Power, 102, p. 12)
J. Eng. Power. January 1980, 102(1): 13.
doi: https://doi.org/10.1115/1.3230211
Topics:
Axial flow
,
Blades
,
Reynolds number
,
Surface roughness
Discussion: “Mean Velocity and Decay Characteristics of the Guidevane and Stator Blade Wake of an Axial Flow Compressor” (Lakshminarayana, B., and Davino, R., 1980, ASME J. Eng. Power, 102, pp. 50–60)
J. Eng. Power. January 1980, 102(1): 60.
doi: https://doi.org/10.1115/1.3230233
Topics:
Axial flow
,
Blades
,
Stators
,
Wakes
Closure to “Discussion of ‘Mean Velocity and Decay Characteristics of the Guidevane and Stator Blade Wake of an Axial Flow Compressor’” (1980, ASME J. Eng. Power, 102, p. 60)
J. Eng. Power. January 1980, 102(1): 60.
doi: https://doi.org/10.1115/1.3230234
Topics:
Axial flow
,
Blades
,
Stators
,
Wakes
Technical Briefs
Some Dynamic and Time-Averaged Flow Measurements in a Turbine Rig
J. Eng. Power. January 1980, 102(1): 223–224.
doi: https://doi.org/10.1115/1.3230227
Email alerts
RSS Feeds
An Investigation of a Multi-Injector, Premix/Micromix Burner Burning Pure Methane to Pure Hydrogen
J. Eng. Gas Turbines Power (July 2025)
Operation of a Compression Ignition Engine at Idling Load Under Simulated Cold Weather Conditions
J. Eng. Gas Turbines Power (August 2025)
In-Cylinder Imaging and Emissions Measurements of Cold-Start Split Injection Strategies
J. Eng. Gas Turbines Power (August 2025)
Effects of Lattice Orientation Angle on TPMS-Based Transpiration Cooling
J. Eng. Gas Turbines Power (September 2025)
Compressor Development for CO2-Based Pumped Thermal Energy Storage Systems
J. Eng. Gas Turbines Power (September 2025)