Since the first nonlinear forced response validation of frictionally coupled bladed disks, more than 20 years have passed, and numerous incremental modeling and simulation refinements were proposed. With the present work, we intend to assess how much we have improved since then. To this end, we present findings of an exhaustive validation campaign designed to systematically validate the nonlinear vibration prediction for the different friction joints at blade roots, interlocked shrouds and under-platform dampers. An original approach for the identification of crucial contact properties is developed. By using the dynamic Lagrangian contact formulation and a refined spatial contact discretization, it is demonstrated that the delicate identification of contact stiffness properties can be circumvented. The friction coefficient is measured in a separate test, and determined as unique function of temperature, preload, wear state. Rotating rig and engine measurements are compared against simulations with the tool OrAgL, developed jointly by the Leibniz Universität Hannover and the University of Stuttgart, in which state-of-the-art component mode synthesis (CMS) and harmonic balance methods (HBMs) are implemented.

References

References
1.
Waite
,
J. J.
, and
Kielb
,
R. E.
,
2016
, “
Shock Structure, Mode Shape, and Geometric Considerations for Low-Pressure Turbine Flutter Suppression
,”
ASME
Paper No. GT2016-56706.
2.
Griffin
,
J. H.
, and
Labelle
,
R. F.
,
1996
, “
A Rational Method for Optimizing Shroud Damping
,”
ASME
Paper No. 96-GT-402.
3.
Szwedowicz
,
J.
,
Sextro
,
W.
,
Visser
,
R.
, and
Masserey
,
P. A.
,
2003
, “
On Forced Vibration of Shrouded Turbine Blades
,”
ASME
Paper No. GT2003-38808.
4.
Zucca
,
S.
,
Gola
,
M. M.
, and
Piraccini
,
F.
,
2012
, “
Non-Linear Dynamics Od Steam Turbine Blades With Shroud: Numerical Analysis and Experiments
,”
ASME
Paper No. GT2012-69691.
5.
Panning
,
L.
,
Popp, K.
,
Sextro, W.
,
Goetting, F.
,
Kayser, A.
, and
Wolter, I.
,
2004
, “
Asymmetrical Underplatform Dampers in Gas Turbine Bladings: Theory and Application
,”
ASME
Paper No. GT2004-53316.
6.
Sever
,
I. A.
,
Petrov
,
E. P.
, and
Ewins
,
D. J.
,
2007
, “
Experimental and Numerical Investigation of Rotating Bladed Disk Forced Response Using Under-Platform Friction Dampers
,”
ASME
Paper No. GT2007-27307.
7.
Szwedowcz
,
J.
,
Gibert
,
C.
,
Sommer
,
T. P.
, and
Kellerer
,
R.
,
2008
, “
Numerical and Experimental Damping Assessment of a Thin-Walled Friction Damper in the Rotating Setup With High Pressure Turbine Blades
,”
ASME J. Eng. Gas Turbines Power.
,
130
(
1
), p.
012502
.
8.
Charleux
,
D.
,
Gibert
,
C.
,
Thouverez
,
F.
, and
Dupeux
,
J.
,
2006
, “
Numerical and Experimental Study of Friction Damping in Blade Attachments of Rotating Bladed Disks”. Hindawi Publishing Corporation
,”
Int. J. Rotating Mach.
,
2006
, pp.
1
13
.
9.
Jean
,
P.
,
Gibert
,
C.
,
Dupont
,
C.
, and
Lombard
,
J.-P.
,
2008
, “
Test-Model Correlation of Dry-Friction Damping Phenomena in Aero-Engines
,”
ASME
Paper No. GT2008-50891.
10.
Hartung
,
A.
, and
Hackenberg
,
H.-P.
,
2016
, “
A Practical Approach for Evaluation of Equivalent Linear Damping From Measurements of Mistuned and/or Nonlinear Stages and Forced Response Validation
,”
ASME
Paper No. GT2016-56435.
11.
Hartung
,
A.
,
Retze
,
U.
, and
Hackenberg
,
H.-P.
,
2016
, “
Impulse Mistuning of Blades and Vanes
,”
ASME
Paper No. GT2016-56433.
12.
Zielinski
,
M.
, and
Ziller
,
G.
,
2017
, “
BSSMT Data Sheet
,” MTU Aero Engines AG, Munich, Germany.
13.
Heinze
,
T.
,
Panning-von Scheidt
,
L.
,
Wallaschek
,
J.
, and
Hartung
,
A.
,
2017
, “
A Taylor Series Expansion Approach for Nonlinear Blade Forced Response Prediction Considering Variable Rotational Speed
,”
ASME J. Eng. Gas Turbines Power
,
139
(
6
), p.
62503
.
14.
Krack
,
M.
,
Salles
,
L.
, and
Thouverez
,
F.
,
2016
, “
Vibration Prediction of Bladed Disks Coupled by Friction Joints
,”
Arch. Comput. Methods Eng.
,
24
(
3
), pp.
589
636
.
15.
Nacivet
,
S.
,
Pierre
,
C.
,
Thouverez
,
F.
, and
Jezequel
,
L.
,
2003
, “
A Dynamic Lagrangian Frequency–Time Method for the Vibration of Dry Friction-Damped Systems
,”
J. Sound Vib.
,
265
(
1
), pp.
201
219
.
16.
Krack
,
M.
,
Herzog
,
A.
,
Panning-von Scheid
,
L.
,
Wallaschek
,
J.
,
Siewert
,
C.
, and
Hartung
,
A.
,
2012
, “
Multiharmonic Analysis and Design of Shroud Friction Joints of Bladed Disks Subject to Mircroslip
,” Proc. ASME IDETC/CIE, Chicago, IL, Aug. 12–15, p. 8.
17.
Zucca
,
S.
, and
Firrone
,
C. M.
,
2014
, “
Nonlinear Dynamics of Mechanical Systems With Friction Contacts: Coupled Static and Dynamic Multi-Harmonic Balance Method and Multiple Solutions
,”
J. Sound Vib.
,
333
(
3
), pp.
916
926
.
You do not currently have access to this content.