Previous studies have indicated some differences between steady computational fluid dynamics (CFD) predictions of flow in a rotor–stator disk cavity with rotating bolts compared to measurements. Recently, time-dependent CFD simulations have revealed the unsteadiness present in the flow and have given improved agreement with measurements. In this paper, unsteady Reynolds averaged Navier–Stokes (URANS) 360 deg model CFD calculations of a rotor–stator cavity with rotor bolts were performed in order to better understand the flow and heat transfer within a disk cavity previously studied experimentally by other workers. It is shown that the rotating bolts generate unsteadiness due to wake shedding which creates time-dependent flow patterns within the cavity. At low throughflow conditions, the unsteady flow significantly increases the average disk temperature. A systematic parametric study is presented giving insight into the influence of number of bolts, mass flow rate, cavity gap ratio, and the bolts-to-shroud gap ratio on the time-dependent flow within the cavity.
Effect of Bolts on Flow and Heat Transfer in a Rotor–Stator Disk Cavity
Contributed by the Heat Transfer Committee of ASME for publication in the JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received July 12, 2016; final manuscript received August 25, 2016; published online January 4, 2017. Editor: David Wisler.
- Views Icon Views
- Share Icon Share
- Search Site
Mohamed, S. N., Chew, J. W., and Hills, N. J. (January 4, 2017). "Effect of Bolts on Flow and Heat Transfer in a Rotor–Stator Disk Cavity." ASME. J. Eng. Gas Turbines Power. May 2017; 139(5): 051901. https://doi.org/10.1115/1.4035144
Download citation file:
- Ris (Zotero)
- Reference Manager