Diesel particulate filters (DPFs) have seen widespread use in on- and off-road applications as an effective means for meeting increasingly stringent particle emission regulations. Over time, incombustible material or ash, primarily derived from metallic additives in the engine lubricant, accumulates in the DPF. Ash accumulation leads to increased flow restriction and an associated increase in pressure-drop across the particulate filter, negatively impacting engine performance and fuel economy and eventually requiring periodic filter service or replacement. While the adverse effects of ash accumulation on DPF performance are well known, the underlying mechanisms controlling these effects are not. The results of this work show ash accumulation and distribution in the DPF as a dynamic process with each stage of ash accumulation altering the filter’s pressure-drop response. Through a combined approach employing targeted experiments and comparison with the existing knowledge base, this work further demonstrates the significant effect ash deposits have on DPF pressure-drop sensitivity to soot accumulation. Ash deposits reduce the available filtration area, resulting in locally elevated soot loads and higher exhaust gas velocities through the filter, altering the conditions under which the soot is deposited and ultimately controlling the filter’s pressure-drop characteristics. In this study, a novel accelerated ash loading system was employed to generate the ash and load the DPFs under carefully controlled exhaust conditions. The ash loading system was coupled to the exhaust of a Cummins ISB diesel engine, allowing for accelerated ash loading and DPF performance evaluation with realistic exhaust conditions. Following DPF performance evaluation, the filters were subjected to a detailed post-mortem analysis in which key ash properties were measured and quantified. The experimental results, coupled with the ash property measurements, provide additional insight into the underlying physical mechanisms controlling ash properties, ash/soot interactions, and their effects on DPF performance.
Skip Nav Destination
Article navigation
March 2011
Research Papers
Lubricant-Derived Ash Properties and Their Effects on Diesel Particulate Filter Pressure-Drop Performance
Alexander Sappok,
Alexander Sappok
Sloan Automotive Laboratory,
Massachusetts Institute of Technology
, 77 Massachusetts Avenue, Cambridge, MA 02139
Search for other works by this author on:
Victor W. Wong
Victor W. Wong
Sloan Automotive Laboratory,
Massachusetts Institute of Technology
, 77 Massachusetts Avenue, Cambridge, MA 02139
Search for other works by this author on:
Alexander Sappok
Sloan Automotive Laboratory,
Massachusetts Institute of Technology
, 77 Massachusetts Avenue, Cambridge, MA 02139
Victor W. Wong
Sloan Automotive Laboratory,
Massachusetts Institute of Technology
, 77 Massachusetts Avenue, Cambridge, MA 02139J. Eng. Gas Turbines Power. Mar 2011, 133(3): 032805 (12 pages)
Published Online: November 9, 2010
Article history
Received:
December 15, 2009
Revised:
February 5, 2010
Online:
November 9, 2010
Published:
November 9, 2010
Citation
Sappok, A., and Wong, V. W. (November 9, 2010). "Lubricant-Derived Ash Properties and Their Effects on Diesel Particulate Filter Pressure-Drop Performance." ASME. J. Eng. Gas Turbines Power. March 2011; 133(3): 032805. https://doi.org/10.1115/1.4001944
Download citation file:
Get Email Alerts
Blade Excitation Alleviation of a Nozzleless Radial Turbine by Casing Treatment Based on Reduced Order Mode
J. Eng. Gas Turbines Power
Design And Testing of a Compact, Reverse Brayton Cycle, Air (R729) Cooling Machine
J. Eng. Gas Turbines Power
Experimental Study on Liquid Jet Trajectory in Cross Flow of Swirling Air at Elevated Pressure Condition
J. Eng. Gas Turbines Power
Related Articles
Comparison of Filter Smoke Number and Elemental Carbon Mass From Partially Premixed Low Temperature Combustion in a Direct-Injection Diesel Engine
J. Eng. Gas Turbines Power (October,2011)
Soot Modeling for Advanced Control of Diesel Engine Aftertreatment
J. Eng. Gas Turbines Power (December,2011)
Endothermic Phenomena in Diesel Particulate Filters During Regeneration
J. Eng. Gas Turbines Power (July,2003)
Exhaust-Stream and In-Cylinder Measurements and Analysis of the Soot Emissions From a Common Rail Diesel Engine Using Two Fuels
J. Eng. Gas Turbines Power (November,2010)
Related Proceedings Papers
Related Chapters
Control and Operational Performance
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Natural Gas Transmission
Pipeline Design & Construction: A Practical Approach, Third Edition
Application Analysis and Experimental Study on Performance of Energy-Saving Electret Fiber
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)