Established high temperature operation of gas foil bearings (GFB) is of great interest for gas turbine applications. The effects of (high) shaft temperature on the structural stiffness and mechanical energy dissipation parameters of a foil bearing (FB) must be assessed experimentally. Presently, a hollow shaft warmed by an electric heater holds a floating second generation FB that is loaded dynamically by an electromagnetic shaker. In tests with the shaft temperature up to , the measurements of dynamic load and ensuing FB deflection render the bearing structural parameters, stiffness and damping, as a function of excitation frequency and amplitude of motion. The identified FB stiffness and viscous damping coefficients increase with shaft temperature due to an increase in the FB assembly interference or preload. The bearing material structural loss factor best representing mechanical energy dissipation decreases slightly with shaft temperature while increasing with excitation frequency. Separate static load measurements on the bearing also make evident the preload of the test bearing-shaft system at room temperature. The loss factor obtained from the area inside the hysteresis loop of the static load versus the deflection curve agrees remarkably with the loss factor obtained from the dynamic load measurements. The static procedure offers substantial savings in cost and time to determine the energy dissipation characteristics of foil bearings. Post-test inspection of the FB reveals sustained wear at the locations, where the bumps contact the top foil and the bearing sleeve inner surface, thus, evidences the bearing energy dissipation by dry friction.
Skip Nav Destination
e-mail: lsanandres@tamu.edu
Article navigation
March 2011
Research Papers
Identification of Structural Stiffness and Energy Dissipation Parameters in a Second Generation Foil Bearing: Effect of Shaft Temperature
Luis San Andrés,
Luis San Andrés
Mast-Childs Professor
Fellow ASME
Department of Mechanical Engineering,
e-mail: lsanandres@tamu.edu
Texas A&M University
, College Station, TX 77843
Search for other works by this author on:
Keun Ryu,
Keun Ryu
Research Assistant
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843
Search for other works by this author on:
Tae Ho Kim
Tae Ho Kim
Senior Research Scientist
Energy Mechanics Research Center,
Korea Institute of Science and Technology
, 39-1 Hawolgok-dong, Songbuk-gu, Seoul 136-791, Korea
Search for other works by this author on:
Luis San Andrés
Mast-Childs Professor
Fellow ASME
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843e-mail: lsanandres@tamu.edu
Keun Ryu
Research Assistant
Department of Mechanical Engineering,
Texas A&M University
, College Station, TX 77843
Tae Ho Kim
Senior Research Scientist
Energy Mechanics Research Center,
Korea Institute of Science and Technology
, 39-1 Hawolgok-dong, Songbuk-gu, Seoul 136-791, Korea
J. Eng. Gas Turbines Power. Mar 2011, 133(3): 032501 (9 pages)
Published Online: November 11, 2010
Article history
Received:
April 6, 2010
Revised:
July 8, 2010
Online:
November 11, 2010
Published:
November 11, 2010
Citation
San Andrés, L., Ryu, K., and Kim, T. H. (November 11, 2010). "Identification of Structural Stiffness and Energy Dissipation Parameters in a Second Generation Foil Bearing: Effect of Shaft Temperature." ASME. J. Eng. Gas Turbines Power. March 2011; 133(3): 032501. https://doi.org/10.1115/1.4002317
Download citation file:
Get Email Alerts
Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability
J. Eng. Gas Turbines Power
Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions
J. Eng. Gas Turbines Power
Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials
J. Eng. Gas Turbines Power
Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling
J. Eng. Gas Turbines Power
Related Articles
Structural Stiffness, Dry Friction Coefficient, and Equivalent Viscous Damping in a Bump-Type Foil Gas Bearing
J. Eng. Gas Turbines Power (April,2007)
Characterization of a Foil Bearing Structure at Increasing Temperatures: Static Load and Dynamic Force Performance
J. Tribol (October,2009)
Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data
J. Eng. Gas Turbines Power (January,2008)
Identification of Rotordynamic Force Coefficients of a Metal Mesh Foil Bearing Using Impact Load Excitations
J. Eng. Gas Turbines Power (November,2011)
Related Proceedings Papers
Related Chapters
Summary and Conclusions
Bearing Dynamic Coefficients in Rotordynamics: Computation Methods and Practical Applications
Supporting Systems/Foundations
Handbook on Stiffness & Damping in Mechanical Design
Fundamentals of Structural Dynamics
Flow Induced Vibration of Power and Process Plant Components: A Practical Workbook