Advances on the modeling of nonlinear rotor-bearing models for prediction of the dynamic shaft response of automotive turbochargers (TCs) supported on floating ring bearings (FRBs) are presented. Comprehensive test data for a TC unit operating at a top speed of $65krpm$ serves to validate the model predictions. The static forced performance of the support FRBs considers lubricant thermal effects, thermal expansion of the shaft and bearings, and entrance pressure losses due to centrifugal flow effects. The bearing analysis also yields linearized rotordynamic force coefficients for the inner and outer lubricant films. These coefficients are used with the rotor model to predict the synchronous response to imbalance and the system natural frequencies and stability. A method renders an accurate estimation of the test rotor imbalance by using the actual vibration measurements and influence coefficients derived from predictions using linearized bearing force coefficients. Predicted ring rotational speeds, operating radial clearances, and lubricant viscosities for the inner and outer films are the main input to the nonlinear time transient analysis. The nonlinear response model predicts the total shaft motion, with fast Fourier transforms showing the synchronous response, and amplitudes and whirl frequencies of subsynchronous motions. The predicted synchronous amplitudes are in good agreement with the measurements, in particular at high shaft speeds. The nonlinear analysis predicts multiple frequency subsynchronous motions for speeds ranging from $10krpmto55krpm$ (maximum speed $70krpm$), with amplitudes and frequencies that correlate well with the test data. The comparisons validate the comprehensive rotor-bearings model whose ultimate aim is to save TC design time and accelerate product development.

1.
Shaw
,
C.
, and
Nussdorfer
,
T.
, 1947, “
An Analysis of the Full-Floating Journal Bearing
,” NACA Report No. 866, pp.
95
107
.
2.
Born
,
H.
, 1987, “
Analytical and Experimental Investigation of the Stability of the Rotor-Bearing System of a New Small Turbocharger
,” ASME Paper No. 87-GT-110.
3.
Orcutt
,
F.
, and
Ng
,
C.
, 1968, “
Steady-State and Dynamic Properties of the Floating-Ring Journal Bearing
,”
ASME J. Lubr. Technol.
0022-2305
90
, pp.
243
253
.
4.
Tanaka
,
M.
, 1996, “
A Theoretical Analysis of Stability Characteristics of High Speed Floating Bush Bearings
,”
Proceedings of the 6th International Conference on Vibrations in Rotating Machinery, IMechE Conference Transaction 1996–6
,
Oxford
,
UK
, September, Paper C500/087/96, pp.
133
142
.
5.
Tatara
,
A.
, 1970, “
An Experimental Study on the Stabilizing Effect of Floating Bush Journal Bearings
,”
Bull. JSME
0021-3764
13
, pp.
859
863
.
6.
Tanaka
,
M.
, and
Hori
,
Y.
, 1972, “
Stability Characteristics of Floating Bush Bearings
,”
ASME J. Lubr. Technol.
0022-2305
94
, pp.
248
259
.
7.
Li
,
C.
, 1982, “
Dynamics of Rotor Bearing Systems Supported by Floating Ring Bearings
,”
ASME J. Lubr. Technol.
0022-2305
104
, pp.
469
477
.
8.
Trippett
,
R.
, and
Li
,
D.
, 1983, “
High-Speed Floating-Ring Bearing Test and Analysis
,”
ASLE Trans.
0569-8197
27
(
1
), pp.
73
81
.
9.
San Andrés
,
L.
, and
Kerth
,
J.
, 2004, “
Thermal Effects on the Performance of Floating Ring Bearings for Turbochargers
,”
Proc. Inst. Mech. Eng., Part J: J. Eng. Tribol.
1350-6501
218
, pp.
1
14
.
10.
Holt
,
C.
,
San Andrés
,
L.
,
Sahay
,
S.
,
Tang
,
P.
,
LaRue
,
G.
, and
Gjika
,
K.
, 2005, “
Test Response and Nonlinear Analysis of a Turbocharger Supported on Floating Ring Bearings
,”
ASME J. Vibr. Acoust.
0739-3717
127
(
2
), pp.
107
212
.
11.
Kerth
,
J.
, 2003, “
Prediction and Measurement of the Rotordynamic Response of an Automotive Turbocharger with Floating Ring Bearings
,” M.S. thesis, Texas A&M University, College Station, TX.
12.
San Andrés
,
L.
,
,
J.
,
Chinta
,
M.
,
LaRue
,
G.
, and
Gjika
,
K.
, 2005, “
Nonlinear Rotordynamics of Automotive Turbochargers—Predictions and Comparisons to Test Data
,”
ASME J. Eng. Gas Turbines Power
0742-4795,
129
, pp.
488
493
.
13.
San Andrés
,
L.
,
,
J. C.
,
Gjika
,
K.
,
Chinta
,
M.
, and
LaRue
,
G.
, 2005, “
Advances in Nonlinear Rotordynamics of Passenger Vehicle Turbochargers: A Virtual Laboratory Anchored to Test Data
,”
Proceedings of the 3rd World Tribology Conference
,
Washington DC
, September, Paper WTC 2005–64155.
14.