Combustion using silicon carbide coated, carbon–carbon composite porous inert media (PIM) was investigated. Two combustion modes, surface and interior, depending upon the location of flame stabilization, were considered. Combustion performance was evaluated by measurements of pressure drop across the PIM, emissions of NOx and CO, and the lean blow-off limit. Data were obtained for the two combustion modes at identical conditions for a range of reactant flowrates, equivalence ratios, and pore sizes of the PIM. Results affirm PIM combustion as an effective method to extend the blow-off limit in lean premixed combustion.

1.
Lefebvre
,
A. H.
,
1995
, “
The Role of Fuel Preparation in Low-Emissions Combustion
,”
ASME J. Eng. Gas Turbines Power
,
177
, pp.
617
654
.
2.
Dalla Betta
,
R. A.
,
Schlatter
,
J. C.
,
Nickolas
,
S. G.
,
Cutrone
,
M. B.
,
Beebe
,
K. W.
,
Furuse
,
Y.
, and
Tsuchiya
,
T.
,
1997
, “
Development of a Catalytic Combustor for a Heavy-Duty Utility Gas Turbine
,”
ASME J. Eng. Gas Turbines Power
,
119
, pp.
844
851
.
3.
Sullivan, J. D., Kendall, R. M., and McDougald, N. K., 2000, “Development of a Low Emission Gas Turbine Combustor,” AFRC International Symposium, Newport Beach, CA.
4.
Ontko, J. S., 2000, National Energy Technology Laboratory (private communication).
5.
Hardesy
,
D. R.
, and
Weinberg
,
F. J.
,
1976
, “
Converter Efficiency in Burner Systems Producing Large Excess E˙nthalpies
,”
Combust. Sci. Technol.
,
12
, pp.
153
157
.
6.
Howell
,
J. R.
,
Hall
,
M. J.
, and
Ellzey
,
J. L.
,
1996
, “
Radiation Enhanced/Controlled Phenomena of Heat and Mass Transfer in Porous Media
,”
Prog. Energy Combust. Sci.
,
22
, pp.
121
145
.
7.
Viskanta, R., 1995, “Interaction of Combustion and Heat Transfer in Porous Inert Media,” in Transport Phenomena in Combustion, edited by S. H. Chan, pp. 64–87, Taylor and Francis.
8.
Trimis
,
D.
, and
Durst
,
F.
,
1996
, “
Combustion in a Porous Medium-Advances and Applications
,”
Combust. Sci. Technol.
,
121
, p.
153
153
.
9.
Kotani
,
Y.
, and
Takeno
,
T.
,
1982
, “
An Experimental Study on Stability and Combustion Characteristics of an Excess Enthalpy Flame
,”
Proc. Combust. Institute
,
19
, pp.
1503
1509
.
10.
Hsu
,
P. F.
,
Evans
,
W. D.
, and
Howell
,
J. R.
,
1993
, “
Experimental and Numerical Study of Premixed Combustion Within Nonhomogeneous Porous Ceramics
,”
Combust. Sci. Technol.
,
90
, pp.
149
172
.
11.
Rumminger
,
M. D.
, and
Dibble
,
R. W.
,
1996
, “
Gas Temperature above a Porous Radiant Burner: Comparison of Measurements and Model Predictions
,”
Proc. Combustion Institute
,
26
, pp.
1755
1762
.
12.
Pickenaker
,
O.
,
Pickenacker
,
K.
,
Wawrzinek
,
K.
,
Trimis
,
D.
,
Pritzkow
,
W. E. C.
,
Muller
,
C.
,
Goedtke
,
P.
,
Papenburg
,
U.
,
Adler
,
J.
,
Standke
,
G.
,
Heymer
,
H.
,
Tauscher
,
W.
, and
Jansen
,
F.
,
1999
, “
Innovative Ceramic Materials for Porous-Medium Burners
,”
Interceram
,
48
, pp.
1
12
.
13.
Sherman, A. J., Tuffias, R. H., and Kaplan, R. B., “Refractory Ceramic Foams: A Novel New High Temperature Structure,” http://www.ultramet.com/foamtech.htm.
14.
Khanna
,
V.
,
Goel
,
R.
, and
Ellzey
,
J. L.
,
1994
, “
Measurements of Emissions and Radiation for Methane Combustion Within a Porous Medium Burner
,”
Combust. Sci. Technol.
,
99
, pp.
133
142
.
15.
Bhargava, A., Kendrick, D. W., Colket, M. B., and Sowa, W. A., 2000, “Pressure Effect on NOx and CO Emissions in Industrial Gas Turbines,” ASME 2000-GT-0097.
16.
Mital
,
R.
,
Gore
,
J. P.
, and
Viskanta
,
R.
,
1997
, “
A Study of the Structure of Submerged Reaction Zone in Porous Ceramic Radiant Burners
,”
Combust. Flame
,
111
, pp.
175
184
.
You do not currently have access to this content.