A combined computational fluid dynamics (CFD) and experimental study of interaction of main gas path and rim sealing flow is reported. The experiments were conducted on a two stage axial turbine and included pressure measurements for the cavity formed between the stage 2 rotor disk and the upstream diaphragm for two values of the diaphragm-to-rotor axial clearance. The pressure measurements indicate that ingestion of the highly swirling annulus flow leads to increased vortex strength within the cavity. This effect is particularly strong for the larger axial clearance. Results from a number of steady and unsteady CFD models have been compared to the measured results. Good agreement between measurement and calculation for time-averaged pressures was obtained using unsteady CFD models, which predicted previously unknown unsteady flow features. This led to fast response pressure transducer measurements being made on the rig, and these confirmed the CFD prediction.
Interaction of Rim Seal and Annulus Flows in an Axial Flow Turbine
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Atlanta, GA, June 16–19, 2003, Paper No. 2003-GT-38368. Manuscript received by IGTI, October 2002, final revision, March 2003. Associate Editor: H. R. Simmons.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Cao , C., Chew, J. W., Millington , P. R., and Hogg, S. I. (November 24, 2004). "Interaction of Rim Seal and Annulus Flows in an Axial Flow Turbine ." ASME. J. Eng. Gas Turbines Power. October 2004; 126(4): 786–793. https://doi.org/10.1115/1.1772408
Download citation file:
- Ris (Zotero)
- Reference Manager