In the present paper, a comprehensive and simple in application design methodology to obtain a gas turbine working on recuperated, intercooled, and reheat cycle utilizing existing gas turbines is presented. Applications of the proposed design steps have been implemented on the three existing gas turbines with wide ranging design complexities. The results of evaluated aerothermodynamic performance for these existing gas turbines with the proposed modifications are presented and compared in this paper. Sample calculations of the analysis procedures discussed, including stage-by-stage analysis of the compressor and turbine sections of the modified gas turbines, have been also included. All the three modified gas turbines were found to have higher performance, with cycle efficiency increase of 9% to 26%, in comparison to their original values.
A Feasibility Study of Existing Gas Turbines for Recuperated, Intercooled, and Reheat Cycle
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Amsterdam, The Netherlands, June 3–6, 2002; Paper No. 2002-GT-30558. Manuscript received by IGTI, Dec. 2001, final revision, Mar. 2002. Associate Editor: E. Benvenuti.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Bhargava, R., Bianchi , M., Peretto , A., and Spina, P. R. (August 11, 2004). "A Feasibility Study of Existing Gas Turbines for Recuperated, Intercooled, and Reheat Cycle ." ASME. J. Eng. Gas Turbines Power. July 2004; 126(3): 531–544. https://doi.org/10.1115/1.1707033
Download citation file:
- Ris (Zotero)
- Reference Manager