A prototype preliminary design task for gas turbines is set up to outline the four major requirements a preliminary design program must typically meet: assessment of all major engine components and their interrelations; inclusion of all relevant disciplines; designing over several operating points; and model fidelity zooming at least for individual components. It is described how the “MOdular Performance and Engine Design System” (MOPEDS)—MTU Aero Engines’ software package for the preliminary design of airborne and stationary gas turbines—fulfills these requirements. The program structure, the graphical user interface, and the physical models are briefly presented. A typical design example is carried out emphasizing the necessity for a numerical procedure to find a solution to the many variables and constraints that the design problem comprises. Finally, some dominating multidisciplinary effects are discussed.
Preliminary Gas Turbine Design Using the Multidisciplinary Design System MOPEDS
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Amsterdam, The Netherlands, June 3–6, 2002; Paper No. 2002-GT-30496. Manuscript received by IGTI, December 2001, final revision, March 2002. Associate Editor: E. Benvenuti.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Jeschke, P., Kurzke , J., Schaber , R., and Riegler, C. (June 7, 2004). "Preliminary Gas Turbine Design Using the Multidisciplinary Design System MOPEDS ." ASME. J. Eng. Gas Turbines Power. April 2004; 126(2): 258–264. https://doi.org/10.1115/1.1639009
Download citation file:
- Ris (Zotero)
- Reference Manager