Several schemes have recently been proposed for achieving either fault tolerance or self-sensing in magnetic bearings. The present work describes the fundamental connection between ability to actuate and ability to sense in a partially failed magnetic bearing system. This relationship is then exploited to construct a self-sensing scheme which operates in the presence of detectable actuator or amplifier faults. Such an approach is advantageous in fault tolerant systems because it reduces or eliminates the need to address potential independent failure mechanisms in sensors and actuators. Based on a model reference parameter estimation mechanism, the self-sensing scheme is shown to provide acceptable position measurement accuracy and bandwidth under various actuator/amplifier faults which are actuator tolerable. Estimates of increase in noise floor and loss of bandwidth under fault conditions are provided. The issue of estimator convergence under fault conditions is examined in detail with comments on implementation complexity arising from scheduling convergence control on fault state.
Self-Sensing in Fault Tolerant Magnetic Bearings
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, June 7–10, 1999; ASME Paper 99-GT-178. Manuscript received by IGTI, Oct. 1998; final revision received by the ASME Headquarters, Mar. 1999. Associate Editor: D. Wisler.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Montie , D., and Maslen, E. (March 1, 1999). "Self-Sensing in Fault Tolerant Magnetic Bearings ." ASME. J. Eng. Gas Turbines Power. October 2001; 123(4): 864–870. https://doi.org/10.1115/1.1383257
Download citation file:
- Ris (Zotero)
- Reference Manager