A theory is developed to describe low-frequency acoustic waves in the complicated diffuser/combustor geometry of a typical industrial gas turbine. This is applied to the RB211-DLE geometry to give predictions for the frequencies of the acoustic resonances at a range of operating conditions. The main resonant frequencies are to be found around 605 Hz (associated with the plenum) and around 461 Hz and 823 Hz (associated with the combustion chamber), as well as one at around 22 Hz (a bulk mode associated with the system as a whole). The stabilizing effects of a Helmholtz resonator, which models damping through nonlinear effects, are included, together with effects of coupled pressure waves in the fuel supply system.
Acoustic Resonances of an Industrial Gas Turbine Combustion System
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Munich, Germany, May 8–11, 2000; Paper 00-GT-094. Manuscript received by IGTI October 1999; final revision received by ASME Headquarters October 2000. Associate Editor: D. Wisler.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Hubbard, S., and Dowling, A. P. (October 1, 2000). "Acoustic Resonances of an Industrial Gas Turbine Combustion System ." ASME. J. Eng. Gas Turbines Power. October 2001; 123(4): 766–773. https://doi.org/10.1115/1.1370975
Download citation file:
- Ris (Zotero)
- Reference Manager