In Part I of the paper a thermodynamic optimization methodology was presented for the “basic” configuration of a humid air turbine cycle plant in which the heat exchange section is viewed as a black-box separated from the rest of the plant (basic components), having a fixed structure. The results of the optimization apply to all the heat exchanger networks that fulfill the optimal boundary conditions between the black-box and the rest of the plant. The aim of this part is to define these heat exchanger networks using a combination of Pinch Technology and Second Law insights. The possibility of a further reduction in the number of heat exchangers is then investigated in order to achieve the best compromise between high performances and structural simplicity.
Thermodynamic Optimization of the HAT Cycle Plant Structure—Part II: Structure of the Heat Exchanger Network
Contributed by the Advanced Energy Systems Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Manuscript received by the AES Division, June 29, 1999; final revision received by the ASME Headquarters Jan. 23, 2000. Editor: H. D. Nelson.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Lazzaretto, A., and Segato, F. (January 23, 2000). "Thermodynamic Optimization of the HAT Cycle Plant Structure—Part II: Structure of the Heat Exchanger Network ." ASME. J. Eng. Gas Turbines Power. January 2001; 123(1): 8–16. https://doi.org/10.1115/1.1339000
Download citation file:
- Ris (Zotero)
- Reference Manager