At the high operating temperatures experienced within a gas turbine, creep damage is a major life-limiting factor. This is especially true for components which are highly stressed and closest to the hot gas inlet end of the machine, such as the rotating blades in this area. The ability to recover the creep properties of used gas turbine components might enable their service lives to be increased considerably. Thereby, maintenance costs could be reduced. Previous research into the feasibility of reconditioning crept superalloys by heat treatment will be reviewed and perceived limitations identified. The current work will add to knowledge on the effects of conventional recovery techniques and will explore potential new heat treatment regimes. The experimental and analytical methods to be used will be both described and supported by preliminary results.
Reconditioning of Gas Turbine Components by Heat Treatment
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Indianapolis, IN, June 7–10, 1999; ASME Paper 99-GT-444. Manuscript received by IGTI March 9, 1999; final revision received by the ASME Headquarters May 15, 2000. Associate Technical Editor: D. Wisler.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Brown, J. A., Freer, R., and Rowley, A. T. (May 15, 2000). "Reconditioning of Gas Turbine Components by Heat Treatment ." ASME. J. Eng. Gas Turbines Power. January 2001; 123(1): 57–61. https://doi.org/10.1115/1.1287593
Download citation file:
- Ris (Zotero)
- Reference Manager