In this paper, the component-mode-based methods formulated in the companion paper (Part I: Theoretical Models) are applied to the dynamic analysis of two example finite element models of bladed disks. Free and forced responses for both tuned and mistuned rotors are considered. Comprehensive comparisons are made among the techniques using full system finite element solutions as a benchmark. The accurate capture of eigenfrequency veering regions is of critical importance for obtaining high-fidelity predictions of the rotor’s sensitivity to mistuning. Therefore, particular attention is devoted to this subject. It is shown that the Craig–Bampton component mode synthesis (CMS) technique is robust and yields highly reliable results. However, this is achieved at considerable computational cost due to the retained component interface degrees of freedom. It is demonstrated that this problem is alleviated by a secondary modal analysis reduction technique (SMART). In addition, a non-CMS mistuning projection method is considered. Although this method is elegant and accurate, it is seen that it lacks the versatility and efficiency of the CMS-based SMART. Overall, this work shows that significant improvements on the accuracy and efficiency of current reduced order modeling methods are possible.
Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part II: Application
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Munich, Germany, May 8–11, 2000; Paper 00-GT-361. Manuscript received by IGTI January 14, 2000; final revision received by ASME Headquarters April 2, 2000. Associate Editor: M. Mignolet.
- Views Icon Views
- Share Icon Share
- Cite Icon Cite
- Search Site
Bladh, R., Castanier, M. P., and Pierre, C. (April 2, 2000). "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks—Part II: Application ." ASME. J. Eng. Gas Turbines Power. January 2001; 123(1): 100–108. https://doi.org/10.1115/1.1338948
Download citation file:
- Ris (Zotero)
- Reference Manager