Skip Nav Destination
Issues
December 1959
This article was originally published in
Journal of Basic Engineering
ISSN 0021-9223
In this Issue
Research Papers
Applications of Computer and Model Studies to Problems Involving Hydraulic Transients
J. Basic Eng. December 1959, 81(4): 433–441.
doi: https://doi.org/10.1115/1.4008496
Topics:
Computers
,
Hydraulic transients
,
Surges
,
Water hammer
Large Water-Level Displacements in the Simple Surge Tank
J. Basic Eng. December 1959, 81(4): 446–452.
doi: https://doi.org/10.1115/1.4008505
Topics:
Surges
,
Water
,
Drainage
,
Flow (Dynamics)
,
Turbines
,
Displacement
,
Oscillations
,
Stress
Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines
J. Basic Eng. December 1959, 81(4): 455–470.
doi: https://doi.org/10.1115/1.4008510
Topics:
Hydraulic turbines
,
Water
,
Computation
,
Flow (Dynamics)
,
Power stations
,
Pressure
,
Turbines
Free Discharge Through a Turbine Distributor, Case, and Draft Tube
J. Basic Eng. December 1959, 81(4): 488–490.
doi: https://doi.org/10.1115/1.4008531
Topics:
Turbines
,
Discharge coefficient
,
Water
Symposium on Welded Spiral Cases From the Manufacturer’s Viewpoint: A Five-Part Symposium
J. Basic Eng. December 1959, 81(4): 493–502.
doi: https://doi.org/10.1115/1.4008535
Topics:
Condensation
,
Construction
,
Hydraulic turbines
,
Hydropower
,
Mechanical engineers
,
Steel
,
Water
,
Welding
Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project
J. Basic Eng. December 1959, 81(4): 505–515.
doi: https://doi.org/10.1115/1.4008540
Topics:
Pump turbines
,
Storage
,
Turbines
,
Blades
,
Cycles
,
Design engineering
,
Reservoirs
,
Rivers
,
Water
Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station
J. Basic Eng. December 1959, 81(4): 521–529.
doi: https://doi.org/10.1115/1.4008546
Topics:
Pump turbines
,
Design engineering
,
Machinery
,
Storage
Some Hydraulic Features of Puntledge Generating Plant
J. Basic Eng. December 1959, 81(4): 534–541.
doi: https://doi.org/10.1115/1.4008552
Topics:
Power stations
,
Pressure
,
Design
,
Construction
,
Fluctuations (Physics)
,
Testing
Application of Boundary-Layer Theory in Turbomachinery
J. Basic Eng. December 1959, 81(4): 543–551.
doi: https://doi.org/10.1115/1.4008555
Topics:
Boundary layers
,
Flow (Dynamics)
,
Turbomachinery
Radial Equilibrium in Supersonic Compressors
J. Basic Eng. December 1959, 81(4): 552–557.
doi: https://doi.org/10.1115/1.4008556
Topics:
Compressors
,
Equilibrium (Physics)
,
Shock (Mechanics)
,
Stators
,
Flow (Dynamics)
,
Rotors
,
Shock waves
Résumé of the Supersonic-Compressor Research at NACA Lewis Laboratory
J. Basic Eng. December 1959, 81(4): 559–568.
doi: https://doi.org/10.1115/1.4008560
Topics:
Compressors
,
Résumés
Application and Analysis of a Computer Control System
J. Basic Eng. December 1959, 81(4): 569–577.
doi: https://doi.org/10.1115/1.4008562
Topics:
Computer control
,
Computers
,
Dynamic analysis
,
Approximation
,
Chemical processes
,
Signals
The Response of Pneumatic Transmission Lines to Step Inputs
J. Basic Eng. December 1959, 81(4): 578–583.
doi: https://doi.org/10.1115/1.4008563
Topics:
Transmission lines
,
Pressure
,
Transients (Dynamics)
,
Electric current
,
Fluid dynamics
,
Laminar flow
,
Leakage
,
Partial differential equations
,
Pipes
,
Tubing
A General Approach to the Practical Solution of Creep Problems
J. Basic Eng. December 1959, 81(4): 585–594.
doi: https://doi.org/10.1115/1.4008566
Topics:
Creep
,
Approximation
,
Disks
,
Flat plates
,
Hardening
,
Rotating disks
,
Steady state
,
Stress concentration
,
Temperature gradient
,
Transients (Dynamics)
Multiaxial Creep Studies on Inconel at 1500 F
J. Basic Eng. December 1959, 81(4): 599–607.
doi: https://doi.org/10.1115/1.4008570
Creep-Rupture Strength of Austenitic Cr-Ni-Mo Steels in Sheet and Bar Form
J. Basic Eng. December 1959, 81(4): 610–616.
doi: https://doi.org/10.1115/1.4008573
Topics:
Creep
,
Rupture
,
Steel
,
Steel sheet
,
Testing
Correlation of High Temperature Creep and Rupture Data
J. Basic Eng. December 1959, 81(4): 617–626.
doi: https://doi.org/10.1115/1.4008574
Topics:
High temperature creep
,
Rupture
,
Creep
,
Aluminum alloys
,
Stress
,
Superalloys
,
Temperature
Comparison of Parameter Methods for Extrapolating High-Temperature Data
J. Basic Eng. December 1959, 81(4): 629–643.
doi: https://doi.org/10.1115/1.4008577
Topics:
High temperature
,
Stress
,
Alloys
,
Heat
,
Rupture
,
Steel
,
Temperature
Tests on Deflection of Flat Oval Bourdon Tubes
J. Basic Eng. December 1959, 81(4): 645–650.
doi: https://doi.org/10.1115/1.4008580
Topics:
Deflection
,
Design
Bending and Stretching of Corrugated Diaphragms
J. Basic Eng. December 1959, 81(4): 651–659.
doi: https://doi.org/10.1115/1.4008583
Topics:
Diaphragms (Mechanical devices)
,
Diaphragms (Structural)
,
Stress
,
Computers
,
Design
,
Membranes
,
Shapes
,
Shells
Electromagnetic Flowmeter Primary Elements
J. Basic Eng. December 1959, 81(4): 660–666.
doi: https://doi.org/10.1115/1.4008585
Topics:
Flowmeters
,
Electrical conductivity
,
Thermal conductivity
,
Design
,
Flow (Dynamics)
,
Inspection
,
Pipelines
,
Reynolds number
The Distribution of Contact Pressures in the Rolling of Metals
J. Basic Eng. December 1959, 81(4): 669–679.
doi: https://doi.org/10.1115/1.4008589
Topics:
Deformation
,
Metals
,
Pressure
,
Stress
,
Strips
The Effects of Friction in the Rolling of Metals
J. Basic Eng. December 1959, 81(4): 681–686.
doi: https://doi.org/10.1115/1.4008592
Discussions and Closures
Discussion: “Applications of Computer and Model Studies to Problems Involving Hydraulic Transients” (McCaig, I. W., and Jonker, F. H., 1959, ASME J. Basic Eng., 81, pp. 433–441)
J. Basic Eng. December 1959, 81(4): 441–442.
doi: https://doi.org/10.1115/1.4008497
Topics:
Computers
,
Hydraulic transients
Discussion: “Applications of Computer and Model Studies to Problems Involving Hydraulic Transients” (McCaig, I. W., and Jonker, F. H., 1959, ASME J. Basic Eng., 81, pp. 433–441)
J. Basic Eng. December 1959, 81(4): 442–443.
doi: https://doi.org/10.1115/1.4008500
Topics:
Computers
,
Hydraulic transients
Discussion: “Applications of Computer and Model Studies to Problems Involving Hydraulic Transients” (McCaig, I. W., and Jonker, F. H., 1959, ASME J. Basic Eng., 81, pp. 433–441)
J. Basic Eng. December 1959, 81(4): 443–444.
doi: https://doi.org/10.1115/1.4008502
Topics:
Computers
,
Hydraulic transients
Closure to “Discussions of ‘Applications of Computer and Model Studies to Problems Involving Hydraulic Transients’” (1959, ASME J. Basic Eng., 81, pp. 441–444)
J. Basic Eng. December 1959, 81(4): 444–445.
doi: https://doi.org/10.1115/1.4008504
Topics:
Computers
Discussion: “Large Water-Level Displacements in the Simple Surge Tank” (Marris, A. W., 1959, ASME J. Basic Eng., 81, pp. 446–452)
J. Basic Eng. December 1959, 81(4): 452.
doi: https://doi.org/10.1115/1.4008506
Discussion: “Large Water-Level Displacements in the Simple Surge Tank” (Marris, A. W., 1959, ASME J. Basic Eng., 81, pp. 446–452)
J. Basic Eng. December 1959, 81(4): 452–453.
doi: https://doi.org/10.1115/1.4008507
Discussion: “Large Water-Level Displacements in the Simple Surge Tank” (Marris, A. W., 1959, ASME J. Basic Eng., 81, pp. 446–452)
J. Basic Eng. December 1959, 81(4): 453.
doi: https://doi.org/10.1115/1.4008508
Closure to “Discussions of ‘Large Water-Level Displacements in the Simple Surge Tank’” (1959, ASME J. Basic Eng., 81, pp. 452–453)
J. Basic Eng. December 1959, 81(4): 453–454.
doi: https://doi.org/10.1115/1.4008509
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 470–471.
doi: https://doi.org/10.1115/1.4008512
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 471–472.
doi: https://doi.org/10.1115/1.4008515
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 472–473.
doi: https://doi.org/10.1115/1.4008517
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 473–475.
doi: https://doi.org/10.1115/1.4008519
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 475–476.
doi: https://doi.org/10.1115/1.4008520
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 476–477.
doi: https://doi.org/10.1115/1.4008521
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 477–480.
doi: https://doi.org/10.1115/1.4008522
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 480–481.
doi: https://doi.org/10.1115/1.4008524
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 481–482.
doi: https://doi.org/10.1115/1.4008525
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 482–483.
doi: https://doi.org/10.1115/1.4008527
Topics:
Hydraulic turbines
,
Water
Discussion: “Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines” (Gibson, Norman R., 1959, ASME J. Basic Eng., 81, pp. 455–470)
J. Basic Eng. December 1959, 81(4): 483–484.
doi: https://doi.org/10.1115/1.4008529
Topics:
Hydraulic turbines
,
Water
Closure to “Discussions of ‘Experience in the Use of the Gibson Method of Water Measurement for Efficiency Tests of Hydraulic Turbines’” (1959, ASME J. Basic Eng., 81, pp. 470–484)
J. Basic Eng. December 1959, 81(4): 484–487.
doi: https://doi.org/10.1115/1.4008530
Topics:
Water
Discussion: “Free Discharge Through a Turbine Distributor, Case, and Draft Tube” (Sutherland, R. A., 1959, ASME J. Basic Eng., 81, pp. 488–490)
J. Basic Eng. December 1959, 81(4): 490–491.
doi: https://doi.org/10.1115/1.4008532
Topics:
Turbines
Discussion: “Free Discharge Through a Turbine Distributor, Case, and Draft Tube” (Sutherland, R. A., 1959, ASME J. Basic Eng., 81, pp. 488–490)
J. Basic Eng. December 1959, 81(4): 491–492.
doi: https://doi.org/10.1115/1.4008533
Topics:
Turbines
Closure to “Discussions of ‘Free Discharge Through a Turbine Distributor, Case, and Draft Tube’” (1959, ASME J. Basic Eng., 81, pp. 490–491)
J. Basic Eng. December 1959, 81(4): 492.
doi: https://doi.org/10.1115/1.4008534
Topics:
Turbines
Discussion: “Symposium on Welded Spiral Cases From the Manufacturer’s Viewpoint: A Five-Part Symposium” (Fisch, J., Rheingans, W. J., Woodall, W. N., McDonald, C. A., Arnold, P. C., and Litzinger, Jr., L. P., 1959, ASME J. Basic Eng., 81, pp. 493–502)
J. Basic Eng. December 1959, 81(4): 502.
doi: https://doi.org/10.1115/1.4008536
Discussion: “Symposium on Welded Spiral Cases From the Manufacturer’s Viewpoint: A Five-Part Symposium” (Fisch, J., Rheingans, W. J., Woodall, W. N., McDonald, C. A., Arnold, P. C., and Litzinger, Jr., L. P., 1959, ASME J. Basic Eng., 81, pp. 493–502)
J. Basic Eng. December 1959, 81(4): 503.
doi: https://doi.org/10.1115/1.4008537
Closure to “Discussions of ‘Symposium on Welded Spiral Cases From the Manufacturer’s Viewpoint: A Five-Part Symposium’” (1959, ASME J. Basic Eng., 81, pp. 502–503)
J. Basic Eng. December 1959, 81(4): 503–504.
doi: https://doi.org/10.1115/1.4008539
Discussion: “Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project” (Aeberli, A. E., 1959, ASME J. Basic Eng., 81, pp. 505–515)
J. Basic Eng. December 1959, 81(4): 516.
doi: https://doi.org/10.1115/1.4008541
Topics:
Pump turbines
,
Storage
Discussion: “Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project” (Aeberli, A. E., 1959, ASME J. Basic Eng., 81, pp. 505–515)
J. Basic Eng. December 1959, 81(4): 516–517.
doi: https://doi.org/10.1115/1.4008542
Topics:
Pump turbines
,
Storage
Discussion: “Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project” (Aeberli, A. E., 1959, ASME J. Basic Eng., 81, pp. 505–515)
J. Basic Eng. December 1959, 81(4): 517.
doi: https://doi.org/10.1115/1.4008543
Topics:
Pump turbines
,
Storage
Discussion: “Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project” (Aeberli, A. E., 1959, ASME J. Basic Eng., 81, pp. 505–515)
J. Basic Eng. December 1959, 81(4): 517.
doi: https://doi.org/10.1115/1.4008544
Topics:
Pump turbines
,
Storage
Closure to “Discussions of ‘Deriaz Type Reversible Pump-Turbine Installation at Sir Adam Beck-Niagara Forebay Pumped Storage Project’” (1959, ASME J. Basic Eng., 81, pp. 516–518)
J. Basic Eng. December 1959, 81(4): 518–520.
doi: https://doi.org/10.1115/1.4008545
Topics:
Pump turbines
,
Storage
Discussion: “Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station” (Deriaz, P., and Warnock, J. G., 1959, ASME J. Basic Eng., 81, pp. 521–529)
J. Basic Eng. December 1959, 81(4): 529–530.
doi: https://doi.org/10.1115/1.4008547
Topics:
Pump turbines
Discussion: “Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station” (Deriaz, P., and Warnock, J. G., 1959, ASME J. Basic Eng., 81, pp. 521–529)
J. Basic Eng. December 1959, 81(4): 530–531.
doi: https://doi.org/10.1115/1.4008548
Topics:
Pump turbines
Discussion: “Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station” (Deriaz, P., and Warnock, J. G., 1959, ASME J. Basic Eng., 81, pp. 521–529)
J. Basic Eng. December 1959, 81(4): 531.
doi: https://doi.org/10.1115/1.4008549
Topics:
Pump turbines
Discussion: “Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station” (Deriaz, P., and Warnock, J. G., 1959, ASME J. Basic Eng., 81, pp. 521–529)
J. Basic Eng. December 1959, 81(4): 531.
doi: https://doi.org/10.1115/1.4008550
Topics:
Pump turbines
Closure to “Discussions of ‘Reversible Pump-Turbines for Sir Adam Beck-Niagara Pumping-Generating Station’” (1959, ASME J. Basic Eng., 81, pp. 529–531)
J. Basic Eng. December 1959, 81(4): 531–533.
doi: https://doi.org/10.1115/1.4008551
Topics:
Pump turbines
Discussion: “Some Hydraulic Features of Puntledge Generating Plant” (Lash, A. W., and Passmore, R. E., 1959, ASME J. Basic Eng., 81, pp. 534–541)
J. Basic Eng. December 1959, 81(4): 541–542.
doi: https://doi.org/10.1115/1.4008553
Topics:
Power stations
Closure to “Discussion of ‘Some Hydraulic Features of Puntledge Generating Plant’” (1959, ASME J. Basic Eng., 81, pp. 541–542)
J. Basic Eng. December 1959, 81(4): 542.
doi: https://doi.org/10.1115/1.4008554
Discussion: “Radial Equilibrium in Supersonic Compressors” (Hammitt, A. G., and Bogdonoff, S. M., 1959, ASME J. Basic Eng., 81, pp. 552–557)
J. Basic Eng. December 1959, 81(4): 557–558.
doi: https://doi.org/10.1115/1.4008557
Topics:
Compressors
,
Equilibrium (Physics)
Discussion: “Radial Equilibrium in Supersonic Compressors” (Hammitt, A. G., and Bogdonoff, S. M., 1959, ASME J. Basic Eng., 81, pp. 552–557)
J. Basic Eng. December 1959, 81(4): 558.
doi: https://doi.org/10.1115/1.4008558
Topics:
Compressors
,
Equilibrium (Physics)
Closure to “Discussions of ‘Radial Equilibrium in Supersonic Compressors’” (1959, ASME J. Basic Eng., 81, pp. 557–558)
J. Basic Eng. December 1959, 81(4): 558.
doi: https://doi.org/10.1115/1.4008559
Topics:
Equilibrium (Physics)
Discussion: “The Response of Pneumatic Transmission Lines to Step Inputs” (Schuder, C. B., and Binder, R. C., 1959, ASME J. Basic Eng., 81, pp. 578–583)
J. Basic Eng. December 1959, 81(4): 583–584.
doi: https://doi.org/10.1115/1.4008564
Topics:
Binders (Materials)
,
Transmission lines
Closure to “Discussion of ‘The Response of Pneumatic Transmission Lines to Step Inputs’” (1959, ASME J. Basic Eng., 81, pp. 583–584)
J. Basic Eng. December 1959, 81(4): 584.
doi: https://doi.org/10.1115/1.4008565
Topics:
Transmission lines
Discussion: “A General Approach to the Practical Solution of Creep Problems” (Mendelson, A., Hirschberg, M. H., and Manson, S. S., 1959, ASME J. Basic Eng., 81, pp. 585–594)
J. Basic Eng. December 1959, 81(4): 595.
doi: https://doi.org/10.1115/1.4008567
Topics:
Creep
Discussion: “A General Approach to the Practical Solution of Creep Problems” (Mendelson, A., Hirschberg, M. H., and Manson, S. S., 1959, ASME J. Basic Eng., 81, pp. 585–594)
J. Basic Eng. December 1959, 81(4): 595–597.
doi: https://doi.org/10.1115/1.4008568
Topics:
Creep
Closure to “Discussions of ‘A General Approach to the Practical Solution of Creep Problems’” (1959, ASME J. Basic Eng., 81, pp. 595–597)
J. Basic Eng. December 1959, 81(4): 597–598.
doi: https://doi.org/10.1115/1.4008569
Topics:
Creep
Discussion: “Multiaxial Creep Studies on Inconel at 1500 F” (Kennedy, C. R., Harms, W. O., and Douglas, D. A., 1959, ASME J. Basic Eng., 81, pp. 599–607)
J. Basic Eng. December 1959, 81(4): 607–608.
doi: https://doi.org/10.1115/1.4008571
Topics:
Creep
Closure to “Discussion of ‘Multiaxial Creep Studies on Inconel at 1500 F’” (1959, ASME J. Basic Eng., 81, pp. 607–608)
J. Basic Eng. December 1959, 81(4): 608–609.
doi: https://doi.org/10.1115/1.4008572
Topics:
Creep
Discussion: “Correlation of High Temperature Creep and Rupture Data” (Conrad, Hans, 1959, ASME J. Basic Eng., 81, pp. 617–626)
J. Basic Eng. December 1959, 81(4): 626–627.
doi: https://doi.org/10.1115/1.4008575
Topics:
High temperature creep
,
Rupture
Closure to “Discussion of ‘Correlation of High Temperature Creep and Rupture Data’” (1959, ASME J. Basic Eng., 81, pp. 626–627)
J. Basic Eng. December 1959, 81(4): 627–628.
doi: https://doi.org/10.1115/1.4008576
Topics:
High temperature creep
,
Rupture
Discussion: “Comparison of Parameter Methods for Extrapolating High-Temperature Data” (Goldhoff, R. M., 1959, ASME J. Basic Eng., 81, pp. 629–643)
J. Basic Eng. December 1959, 81(4): 643–644.
doi: https://doi.org/10.1115/1.4008578
Topics:
High temperature
Closure to “Discussion of ‘Comparison of Parameter Methods for Extrapolating High-Temperature Data’” (1959, ASME J. Basic Eng., 81, pp. 643–644)
J. Basic Eng. December 1959, 81(4): 644.
doi: https://doi.org/10.1115/1.4008579
Topics:
High temperature
Discussion: “Tests on Deflection of Flat Oval Bourdon Tubes” (Kardos, G., 1959, ASME J. Basic Eng., 81, pp. 645–650)
J. Basic Eng. December 1959, 81(4): 650.
doi: https://doi.org/10.1115/1.4008581
Topics:
Deflection
Closure to “Discussion of ‘Tests on Deflection of Flat Oval Bourdon Tubes’” (1959, ASME J. Basic Eng., 81, p. 650)
J. Basic Eng. December 1959, 81(4): 650.
doi: https://doi.org/10.1115/1.4008582
Topics:
Deflection
Discussion: “Bending and Stretching of Corrugated Diaphragms” (Dressler, Robert F., 1959, ASME J. Basic Eng., 81, pp. 651–659)
J. Basic Eng. December 1959, 81(4): 659.
doi: https://doi.org/10.1115/1.4008584
Discussion: “Electromagnetic Flowmeter Primary Elements” (Head, V. P., 1959, ASME J. Basic Eng., 81, pp. 660–666)
J. Basic Eng. December 1959, 81(4): 666–667.
doi: https://doi.org/10.1115/1.4008586
Topics:
Flowmeters
Discussion: “Electromagnetic Flowmeter Primary Elements” (Head, V. P., 1959, ASME J. Basic Eng., 81, pp. 660–666)
J. Basic Eng. December 1959, 81(4): 667.
doi: https://doi.org/10.1115/1.4008587
Topics:
Flowmeters
Closure to “Discussions of ‘Electromagnetic Flowmeter Primary Elements’” (1959, ASME J. Basic Eng., 81, pp. 666–667)
J. Basic Eng. December 1959, 81(4): 667–668.
doi: https://doi.org/10.1115/1.4008588
Topics:
Flowmeters
Discussion: “The Distribution of Contact Pressures in the Rolling of Metals” (MacGregor, C. W., and Palme, R. B., 1959, ASME J. Basic Eng., 81, pp. 669–679)
J. Basic Eng. December 1959, 81(4): 679–680.
doi: https://doi.org/10.1115/1.4008590
Topics:
Metals
Closure to “Discussion of ‘The Distribution of Contact Pressures in the Rolling of Metals’” (1959, ASME J. Basic Eng., 81, pp. 679–680)
J. Basic Eng. December 1959, 81(4): 680.
doi: https://doi.org/10.1115/1.4008591