Skip Nav Destination
Issues
June 1959
This article was originally published in
Journal of Basic Engineering
ISSN 0021-9223
In this Issue
Research Papers
Elastic and Damping Properties of Cylindrical Journal Bearings
J. Basic Eng. June 1959, 81(2): 101–107.
doi: https://doi.org/10.1115/1.4008379
Topics:
Damping
,
Journal bearings
Axial, Relative Motion of a Circular Step Bearing
J. Basic Eng. June 1959, 81(2): 109–115.
doi: https://doi.org/10.1115/1.4008382
Topics:
Bearings
,
Computers
,
Damping
,
Displacement
,
Dynamic response
,
Equations of motion
,
Flow (Dynamics)
,
Fluids
,
Lubricants
,
Stiffness
Friction and Wear of Metals to 1000 C
J. Basic Eng. June 1959, 81(2): 118–121.
doi: https://doi.org/10.1115/1.4008386
Topics:
Friction
,
Metals
,
Wear
,
Steel
,
Temperature
,
Copper
,
Disks
,
Furnaces
,
High temperature
,
Surface energy
Friction Factors for Turbulent Flow in Curved Pipes
J. Basic Eng. June 1959, 81(2): 123–132.
doi: https://doi.org/10.1115/1.4008390
Topics:
Friction
,
Pipes
,
Turbulence
,
Engineers
,
Pressure
Characteristics of a Self-Lubricated Stepped Thrust Pad of Infinite Width With Compressible Lubricant
J. Basic Eng. June 1959, 81(2): 135–145.
doi: https://doi.org/10.1115/1.4008394
Direct Measurement of Net Positive Suction Head
J. Basic Eng. June 1959, 81(2): 147–150.
doi: https://doi.org/10.1115/1.4008397
Topics:
Suction
,
Pressure
,
Vapor pressure
,
Pressure gages
,
Reliability
Transitional Phenomena in Ultrasonic Shock Waves Emitted by Cavitation on Hydrofoils
J. Basic Eng. June 1959, 81(2): 153–162.
doi: https://doi.org/10.1115/1.4008401
Topics:
Cavitation
,
Hydrofoil
,
Shock waves
,
Bubbles
,
Circuits
,
Flow (Dynamics)
,
Pressure
,
Tunnels
Cavitation and NPSH Requirements of Various Liquids
J. Basic Eng. June 1959, 81(2): 167–174.
doi: https://doi.org/10.1115/1.4008404
Topics:
Cavitation
,
Pumps
,
Suction
,
Water
,
Centrifugal pumps
The Unsteady Wake Interaction in Turbomachinery and Its Effect on Cavitation
J. Basic Eng. June 1959, 81(2): 181–188.
doi: https://doi.org/10.1115/1.4008412
Topics:
Cavitation
,
Turbomachinery
,
Wakes
,
Blades
,
Pressure
,
Water tunnels
,
Weapons
Thermal-Stress Ratchet Mechanism in Pressure Vessels
J. Basic Eng. June 1959, 81(2): 190–194.
doi: https://doi.org/10.1115/1.4008415
Topics:
Pressure vessels
,
Thermal stresses
,
Stress
,
Vessels
,
Cycles
,
Metals
,
Pressure
,
Work hardening
Refractory Metal Facings for Protection of Metal Surfaces Subjected to Repeated High-Temperature Pulses
J. Basic Eng. June 1959, 81(2): 197–202.
doi: https://doi.org/10.1115/1.4008418
Topics:
Foundry coatings
,
High temperature
,
Metal surfaces
,
Refractory metals
,
Resonance
,
Temperature
,
Coating processes
,
Coatings
,
Electrons
,
Heat
The Failure of Structural Metals Subjected to Strain-Cycling Conditions
J. Basic Eng. June 1959, 81(2): 203–208.
doi: https://doi.org/10.1115/1.4008419
Topics:
Failure
,
Structural metals
,
Cycles
,
Temperature
,
Grain size
,
Metals
,
Geometry
,
Rupture
Evaluation of Material Wear and Self-Welding in Sodium-Cooled Reactor Systems
J. Basic Eng. June 1959, 81(2): 213–225.
doi: https://doi.org/10.1115/1.4008424
Topics:
Nuclear reactors
,
Sodium
,
Wear
,
Welding
,
Bearings
,
Stress
,
Temperature
,
Adhesion
,
Engineering prototypes
,
Nitrogen
Irradiation of Haynes-25 and Inconel-X Compression Springs in High-Temperature High-Pressure Water
J. Basic Eng. June 1959, 81(2): 226–232.
doi: https://doi.org/10.1115/1.4008425
Energy Losses of Balls Rolling on Plates
J. Basic Eng. June 1959, 81(2): 233–238.
doi: https://doi.org/10.1115/1.4008426
Topics:
Energy dissipation
,
Plates (structures)
,
Stress
,
Surface roughness
,
Damping
On the Effect of Lubricant Inertia in the Theory of Hydrodynamic Lubrication
J. Basic Eng. June 1959, 81(2): 239–244.
doi: https://doi.org/10.1115/1.4008427
Topics:
Inertia (Mechanics)
,
Lubricants
,
Lubrication
,
Bearings
,
Drag (Fluid dynamics)
,
Pressure gradient
,
Stress
,
Viscous flow
,
Wedges
Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction
J. Basic Eng. June 1959, 81(2): 245–252.
doi: https://doi.org/10.1115/1.4008428
Topics:
Clearances (Engineering)
,
Finishes
,
Friction
,
Journal bearings
,
Stress
,
Bearings
Statistical Optimization of Regulators Employing a Binary Error Criterion
J. Basic Eng. June 1959, 81(2): 254–261.
doi: https://doi.org/10.1115/1.4008432
Topics:
Errors
,
Optimization
,
Computers
,
Density
,
Linearization techniques
,
Probability
,
Stress
An Introduction to the Time-Modulated Acceleration Switching Electrohydraulic Servomechanism
J. Basic Eng. June 1959, 81(2): 263–268.
doi: https://doi.org/10.1115/1.4008436
Topics:
Servomechanisms
,
Valves
,
Stress
,
Design
,
Errors
,
Flow control
,
Hydraulic flow
,
Hydraulic servomechanisms
,
Pressure
,
Reliability
Discussions and Closures
Discussion: “Elastic and Damping Properties of Cylindrical Journal Bearings” (Sternlicht, B., 1959, ASME J. Basic Eng., 81, pp. 101–107)
J. Basic Eng. June 1959, 81(2): 107.
doi: https://doi.org/10.1115/1.4008380
Topics:
Damping
,
Journal bearings
Closure to “Discussion of ‘Elastic and Damping Properties of Cylindrical Journal Bearings’” (1959, ASME J. Basic Eng., 81, p. 107)
J. Basic Eng. June 1959, 81(2): 107–108.
doi: https://doi.org/10.1115/1.4008381
Topics:
Damping
Discussion: “Axial, Relative Motion of a Circular Step Bearing” (Licht, L., 1959, ASME J. Basic Eng., 81, pp. 109–115)
J. Basic Eng. June 1959, 81(2): 116.
doi: https://doi.org/10.1115/1.4008383
Topics:
Bearings
Discussion: “Axial, Relative Motion of a Circular Step Bearing” (Licht, L., 1959, ASME J. Basic Eng., 81, pp. 109–115)
J. Basic Eng. June 1959, 81(2): 116–117.
doi: https://doi.org/10.1115/1.4008384
Topics:
Bearings
Closure to “Discussions of ‘Axial, Relative Motion of a Circular Step Bearing’” (1959, ASME J. Basic Eng., 81, pp. 116–117)
J. Basic Eng. June 1959, 81(2): 117.
doi: https://doi.org/10.1115/1.4008385
Discussion: “Friction and Wear of Metals to 1000 C” (Kingsbury, E. P., and Rabinowicz, E., 1959, ASME J. Basic Eng., 81, pp. 118–121)
J. Basic Eng. June 1959, 81(2): 121–122.
doi: https://doi.org/10.1115/1.4008387
Discussion: “Friction and Wear of Metals to 1000 C” (Kingsbury, E. P., and Rabinowicz, E., 1959, ASME J. Basic Eng., 81, pp. 118–121)
J. Basic Eng. June 1959, 81(2): 122.
doi: https://doi.org/10.1115/1.4008388
Closure to “Discussions of ‘Friction and Wear of Metals to 1000 C’” (1959, ASME J. Basic Eng., 81, pp. 121–122)
J. Basic Eng. June 1959, 81(2): 122.
doi: https://doi.org/10.1115/1.4008389
Discussion: “Friction Factors for Turbulent Flow in Curved Pipes” (Itō, H., 1959, ASME J. Basic Eng., 81, pp. 123–132)
J. Basic Eng. June 1959, 81(2): 132.
doi: https://doi.org/10.1115/1.4008391
Topics:
Friction
,
Pipes
,
Turbulence
Discussion: “Friction Factors for Turbulent Flow in Curved Pipes” (Itō, H., 1959, ASME J. Basic Eng., 81, pp. 123–132)
J. Basic Eng. June 1959, 81(2): 132–133.
doi: https://doi.org/10.1115/1.4008392
Topics:
Friction
,
Pipes
,
Turbulence
Closure to “Discussions of ‘Friction Factors for Turbulent Flow in Curved Pipes’” (1959, ASME J. Basic Eng., 81, pp. 132–133)
J. Basic Eng. June 1959, 81(2): 133–134.
doi: https://doi.org/10.1115/1.4008393
Topics:
Friction
,
Turbulence
Discussion: “Characteristics of a Self-Lubricated Stepped Thrust Pad of Infinite Width With Compressible Lubricant” (Kochi, Kikuo C., 1959, ASME J. Basic Eng., 81, pp. 135–145)
J. Basic Eng. June 1959, 81(2): 145–146.
doi: https://doi.org/10.1115/1.4008395
Topics:
Lubricants
,
Thrust
Discussion: “Direct Measurement of Net Positive Suction Head” (Jacobs, Robert B., Martin, Kenneth B., and Hardy, Richard J., 1959, ASME J. Basic Eng., 81, pp. 147–150)
J. Basic Eng. June 1959, 81(2): 150–151.
doi: https://doi.org/10.1115/1.4008398
Topics:
Suction
Closure to “Discussions of ‘Direct Measurement of Net Positive Suction Head’” (1959, ASME J. Basic Eng., 81, pp. 150–151)
J. Basic Eng. June 1959, 81(2): 151–152.
doi: https://doi.org/10.1115/1.4008400
Topics:
Suction
Discussion: “Transitional Phenomena in Ultrasonic Shock Waves Emitted by Cavitation on Hydrofoils” (Numachi, F., 1959, ASME J. Basic Eng., 81, pp. 153–162)
J. Basic Eng. June 1959, 81(2): 162–163.
doi: https://doi.org/10.1115/1.4008402
Topics:
Cavitation
,
Hydrofoil
,
Shock waves
Closure to “Discussion of ‘Transitional Phenomena in Ultrasonic Shock Waves Emitted by Cavitation on Hydrofoils’” (1959, ASME J. Basic Eng., 81, pp. 162–163)
J. Basic Eng. June 1959, 81(2): 163–166.
doi: https://doi.org/10.1115/1.4008403
Topics:
Cavitation
,
Shock waves
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 174.
doi: https://doi.org/10.1115/1.4008405
Topics:
Cavitation
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 174–175.
doi: https://doi.org/10.1115/1.4008406
Topics:
Cavitation
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 175–176.
doi: https://doi.org/10.1115/1.4008407
Topics:
Cavitation
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 176–177.
doi: https://doi.org/10.1115/1.4008408
Topics:
Cavitation
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 177.
doi: https://doi.org/10.1115/1.4008409
Topics:
Cavitation
Discussion: “Cavitation and NPSH Requirements of Various Liquids” (Salemann, Victor, 1959, ASME J. Basic Eng., 81, pp. 167–174)
J. Basic Eng. June 1959, 81(2): 177–179.
doi: https://doi.org/10.1115/1.4008410
Topics:
Cavitation
Closure to “Discussions of ‘Cavitation and NPSH Requirements of Various Liquids’” (1959, ASME J. Basic Eng., 81, pp. 174–179)
J. Basic Eng. June 1959, 81(2): 179–180.
doi: https://doi.org/10.1115/1.4008411
Topics:
Cavitation
Discussion: “The Unsteady Wake Interaction in Turbomachinery and Its Effect on Cavitation” (Yeh, Hsuan, and Eisenhuth, J. J., 1959, ASME J. Basic Eng., 81, pp. 181–188)
J. Basic Eng. June 1959, 81(2): 189.
doi: https://doi.org/10.1115/1.4008413
Topics:
Cavitation
,
Turbomachinery
,
Wakes
Closure to “Discussion of ‘The Unsteady Wake Interaction in Turbomachinery and Its Effect on Cavitation’” (1959, ASME J. Basic Eng., 81, p. 189)
J. Basic Eng. June 1959, 81(2): 189.
doi: https://doi.org/10.1115/1.4008414
Topics:
Turbomachinery
,
Wakes
Discussion: “Thermal-Stress Ratchet Mechanism in Pressure Vessels” (Miller, D. R., 1959, ASME J. Basic Eng., 81, pp. 190–194)
J. Basic Eng. June 1959, 81(2): 194–196.
doi: https://doi.org/10.1115/1.4008416
Topics:
Pressure vessels
,
Thermal stresses
Closure to “Discussion of ‘Thermal-Stress Ratchet Mechanism in Pressure Vessels’” (1959, ASME J. Basic Eng., 81, pp. 194–196)
J. Basic Eng. June 1959, 81(2): 196.
doi: https://doi.org/10.1115/1.4008417
Topics:
Pressure
,
Thermal stresses
Discussion: “The Failure of Structural Metals Subjected to Strain-Cycling Conditions” (Swindeman, R. W., and Douglas, D. A., 1959, ASME J. Basic Eng., 81, pp. 203–208)
J. Basic Eng. June 1959, 81(2): 208–209.
doi: https://doi.org/10.1115/1.4008420
Topics:
Failure
,
Structural metals
Discussion: “The Failure of Structural Metals Subjected to Strain-Cycling Conditions” (Swindeman, R. W., and Douglas, D. A., 1959, ASME J. Basic Eng., 81, pp. 203–208)
J. Basic Eng. June 1959, 81(2): 209–210.
doi: https://doi.org/10.1115/1.4008421
Topics:
Failure
,
Structural metals
Closure to “Discussions of ‘The Failure of Structural Metals Subjected to Strain-Cycling Conditions’” (1959, ASME J. Basic Eng., 81, pp. 208–210)
J. Basic Eng. June 1959, 81(2): 211–212.
doi: https://doi.org/10.1115/1.4008423
Topics:
Failure
,
Structural metals
Discussion: “Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction” (Ocvirk, F. W., and DuBois, G. B., 1959, ASME J. Basic Eng., 81, pp. 245–252)
J. Basic Eng. June 1959, 81(2): 252.
doi: https://doi.org/10.1115/1.4008429
Topics:
Clearances (Engineering)
,
Finishes
,
Friction
,
Journal bearings
,
Stress
Discussion: “Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction” (Ocvirk, F. W., and DuBois, G. B., 1959, ASME J. Basic Eng., 81, pp. 245–252)
J. Basic Eng. June 1959, 81(2): 252–253.
doi: https://doi.org/10.1115/1.4008430
Topics:
Clearances (Engineering)
,
Finishes
,
Friction
,
Journal bearings
,
Stress
Closure to “Discussions of ‘Surface Finish and Clearance Effects on Journal-Bearing Load Capacity and Friction’” (1959, ASME J. Basic Eng., 81, pp. 252–253)
J. Basic Eng. June 1959, 81(2): 253.
doi: https://doi.org/10.1115/1.4008431
Topics:
Clearances (Engineering)
,
Finishes
,
Journal bearings
,
Stress
Discussion: “Statistical Optimization of Regulators Employing a Binary Error Criterion” (Milsum, J. H., 1959, ASME J. Basic Eng., 81, pp. 254–261)
J. Basic Eng. June 1959, 81(2): 261.
doi: https://doi.org/10.1115/1.4008433
Topics:
Errors
,
Optimization
Discussion: “Statistical Optimization of Regulators Employing a Binary Error Criterion” (Milsum, J. H., 1959, ASME J. Basic Eng., 81, pp. 254–261)
J. Basic Eng. June 1959, 81(2): 261.
doi: https://doi.org/10.1115/1.4008434
Topics:
Errors
,
Optimization
Closure to “Discussions of ‘Statistical Optimization of Regulators Employing a Binary Error Criterion’” (1959, ASME J. Basic Eng., 81, p. 261)
J. Basic Eng. June 1959, 81(2): 261–262.
doi: https://doi.org/10.1115/1.4008435
Topics:
Errors
,
Optimization
Closure to “Discussion of ‘Theoretical and Experimental Analysis of Hydrodynamic Gas-Lubricated Journal Bearings’” (1959, ASME J. Basic Eng., 81, p. 272)
J. Basic Eng. June 1959, 81(2): 272–273.
doi: https://doi.org/10.1115/1.4008443
Topics:
Experimental analysis
Email alerts
RSS Feeds
Characterization of Two-Phase Wakes in an Upward Adiabatic Liquid-Gas Flow Around a Cylinder
J. Fluids Eng (August 2023)
Experimental Study of Turbulent Wake Flow Around Trapezoidal Cylinders With Varying Streamwise Aspect Ratios
J. Fluids Eng (August 2023)
Unsteady Simulation and Analysis of Energy Loss Mechanism of a Vertical Volute Pump Under Stall Conditions
J. Fluids Eng (August 2023)
