The ground-effect diffuser has become a major aerodynamic device on open-wheel racing and sports cars. Accordingly, it is widely considered to be indispensable to their aerodynamic performance, largely due to its significant downforce contribution. However, the physics and characteristics that determine how it generates downforce and its application in the auto racing industry require an in-depth analysis to develop an understanding. Furthermore, research that could generate further performance improvement of the diffuser has not been defined and presented. For these reasons, this review attempts to create a systematic understanding of the physics that influence the performance of the ground-effect diffuser. As a means of doing this, the review introduces research data and observations from various relevant studies on this subject. It then investigates advanced diffuser concepts mainly drawn from the race car industry and also proposes a further research direction that would advance the aerodynamic performance of the diffuser. It is concluded that although the diffuser will continue to be paramount in the aerodynamic performance of racing cars, research is needed to identify means to further enhance its performance.
Issue Section:
Review Article
References
1.
Asselin
, M.
, 1997
, “An Introduction to Aircraft Performance
,” AIAA Educational Series, American Institute of Aeronautics and Astronautics, Reston, VA, pp. 141
–149
.2.
Ranzenbach
, R.
, and Barlow
, J.
, 1996
, “Cambered Airfoil in Ground Effect - an Experimental and Computational Study
,” SAE Paper No. 960909
.3.
Zerihan
, J.
, and Zhang
, X.
, 2000
, “Aerodynamics of a Single-Element Wing-in-Ground Effect
,” J. Aircr.
, 37
(6
), pp. 1058
–1064
.4.
Hucho
, W.-H.
, 1998
, Aerodynamics of Road Vehicles
, 4th Rev. ed., SAE International, Society of Automotive Engineers
, Washington, DC
, pp. 392
–395
.5.
Massey
, B.
, and Ward-Smith
, J.
, 2012
, Mechanics of Fluids
, 9th Rev. ed., Taylor & Francis Publishers
, Oxford, UK
, pp. 264
–265
.6.
ESDU
, 2007
, 76027 – Introduction to Design and Performance Data for Diffusers
, ESDU International Ltd, Engineering Sciences Data Unit
, London
.7.
Kline
, S. J.
, Abbott
, D. E.
, and Fox
, R. W.
, 1959
, “Optimum Design of Straight-Walled Diffusers
,” ASME J. Basic Eng.
, 81
, pp. 321
–331
.8.
Sovran
, G.
, and Klomp
, E.
, D.
, 1967
, “Experimentally Determined Optimum Geometries for Rectilinear Diffusers With Rectangular Conical or Annular Cross-Section
,” Fluid Mechanics of Internal Flow
, G.
Sovran
, ed., Elsevier
, Amsterdam
, The Netherlands, pp. 270
–319
.9.
Tipler
, J.
, 2009
, Lotus 78 and 79: The Ground-Effect Cars
, The Crowood Press
, Wiltshire, UK
.10.
Knowles
, K.
, Donahue
, D. T.
, and Finnis
, M. V.
, 1994
, “A Study of Wings in Ground Effect
,” RAeS Conference on Vehicle Aerodynamics
, Loughborough, UK, pp. 1
–13
.11.
Wright
, P.
, G.
, 1982
, “The Influence of Aerodynamics on the Design of Formula One Racing Cars
,” Int. J. Veh. Des.
, 3
(4
), pp. 383
–397
.12.
Zhang
, X.
, Toet
, W.
, and Zerihan
, J.
, 2006
, “Ground Effect Aerodynamics of Race Cars
,” ASME J. Appl. Mech. Rev.
, 59
(1
), pp. 33
–49
.13.
Barnard
, R. H.
, 2001
, Road Vehicle Aerodynamic Design: An Introduction
, MechAero Publishing
, St. Albans, UK
, p. 140
.14.
Rendle
, S.
, 2011
, Redbull Racing F1 Car 2010 (RB6) – Owner's Workshop Manual
, Haynes Publishing
, Somerset, UK
, pp. 47
–49
.15.
Toet
, W.
, 2013
, “Aerodynamics and Aerodynamic Research in Formula 1
,” Aeronaut. J.
, 117
(1187
), pp. 1
–25
.16.
Cooper
, K.
, R.
, Bertenyi
, T.
, Dutil
, G.
, Syms
, J.
, and Sovran
, G.
, 1998
, “The Aerodynamic Performance of Automotive Underbody Diffusers
,” SAE Paper No. 98–0030
.17.
Ahmed
, S.
, Ramm
, G.
, and Faltin
, G.
, 1984
, “Some Salient Features of the Time-Averaged Ground Vehicle Wake
,” SAE Paper No. 840300
, pp. 1
–34
.18.
Cooper
, K.
, R.
, Sovran
, G.
, and Syms
, J.
, 2000
, “Selecting Automotive Diffusers to Maximise Underbody Downforce
,” SAE Paper No. 2000–01–0354
.19.
Pegrum
, J.
, M.
, 2006
, “Experimental Study of the Vortex System Generated by a Formula 1 Front Wing
,” Ph.D. thesis, Imperial College London, UK.20.
Green
, S.
, I.
, 1995
, Fluid Vortices
, Kluwer Academic Publishers
, Dordrecht, Netherlands
, pp. 1
–34
.21.
Hall
, M. G.
, 1972
, “Vortex Breakdown
,” Annu. Rev. Fluid Mech.
, 4
(1
), pp. 195
–218
.22.
Leibovich
, S.
, 1978
, “The Structure of Vortex Breakdown
,” Annu. Rev. Fluid Mech.
, 10
(1
), pp. 221
–246
.23.
Lambourne
, N. C.
, and Bryer
, D. W.
, 1962
, “The Bursting of Leading-Edge Vortices–Some Observations and Discussions of the Phenomenon
,” Ministry of Aviation Aeronautical Research Council Reports and Memoranda
, Her Majesty's Stationery Office, London, UK, Report No. 3282
.http://naca.central.cranfield.ac.uk/reports/arc/rm/3282.pdf24.
VanDyke
, M.
, 1982
, An Album of Fluid Motion
, The Parabolic Press
, Stanford, CA
, p. 74
.25.
Ehirim
, O.
, H.
, 2017
, “Aerodynamics and Performance Enhancement of a Ground-Effect Diffuser
,” Ph.D. thesis, Cranfield University, Bedford, UK.26.
George
, A. R.
, 1981
, “Aerodynamic Effects of Shape, Camber, Pitch on Ground-Vehicle Bodies
,” ASME J. Fluids Eng.
, 103
(4
), pp. 631
–637
.27.
George
, A.
, R.
, and Donis
, J.
, 1983
, “Flow Patterns, Pressures and Forces in the Underside of Idealised Ground Effect Vehicles
,” Proceedings of the ASME Fluids Engineering Division Symposium on Aerodynamics of Transportation II, 7, pp. 69–79.28.
Breslouer
, O.
, and George
, A.
, 2008
, “Exploratory Experimental Studies of Forces and Flow Structure on a Bluff Body With Variable Diffuser and Wheel Configurations
,” SAE Paper No. 2008–01–0326
.29.
Senior
, A.
, E.
, and Zhang
, X.
, 2000
, “An Experimental Study of a Diffuser in Ground Effect
,” AIAA
Paper No. 2000-0118.30.
Senior
, A. E.
, and Zhang
, X.
, 2000
, “The Force and Pressure of a Diffuser-Equipped Bluff Body in Ground Effect
,” ASME J. Fluids Eng.
, 123
(1
), pp. 105
–111
.31.
Senior
, A.
, 2002
, “The Aerodynamics of a Diffuser Equipped Bluff Body in Ground Effect
,” Ph.D. thesis, University of Southampton, Southampton, UK.32.
Zhang
, X.
, Senior
, A.
, and Ruhrmann
, A.
, 2004
, “Vortices behind a Bluff Body With an Upswept Aft Section in Ground Effect
,” Int. J. Heat Fluid Flow
, 25
(1
), pp. 1
–9
.33.
Ruhrmann
, A.
, and Zhang
, X.
, 2003
, “Influence of Diffuser Angle on a Bluff Body in Ground Effect
,” ASME J. Fluids Eng.
, 125
(2
), pp. 332
–338
.34.
Jowsey
, L.
, and Passmore
, M.
, 2010
, “Experimental Study of Multiple-Channel Automotive Underbody Diffusers
,” Proc. Inst. Mech. Eng., Part D: J. Automobile
, 224
(7
), pp. 865
–879
.35.
Jowsey
, L.
, 2013
, “An Experimental Study of Automotive Underbody Diffusers
,” Ph.D. thesis, Loughborough University, Loughborough, UK.36.
Marklund
, J.
, and Lofdahl
, L.
, 2009
, “Drag Reduction of a Simple Bluff Body by Changing the Rear End and Use the Ground Effect
,” ASME
Paper No. FEDSM2009-78502. 37.
Marklund
, J.
, 2013
, “Under-body and Diffuser Flows of Passenger Vehicles
,” Ph.D. thesis, Chalmers University of Technology, Göteborg, Sweden.38.
Shih
, T.
, H.
, Liou
, W.
, W.
, Shabbir
, A.
, Yang
, Z.
, and Zhu
, J.
, 1994
, “New k-ε Eddy Viscosity Model for High Reynolds Number Turbulent Flows-Model Development and Validation
,” NASA
Technical Memorandum, Cleveland, OH, Report No. 106721.39.
Menter
, F. R.
, 1994
, “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications
,” AIAA J.
, 32
(8
), pp. 1598
–1605
.40.
Puglisevich
, L. S.
, and Page
, G.
, 2011
, “Large Eddy Simulation of the Flow Around a Diffuser-Equipped Bluff Body in Ground Effect
,” ASME
Paper No. IMECE2011-62673. 41.
Puglisevich
, L.
, S.
, 2013
, “Large Eddy Simulation for Automotive Vortical Flows in Ground Effect
,” Ph.D. thesis, Loughborough University, Loughborough, UK.42.
Smagorinsky
, J.
, 1963
, “General Circulation Experiments With the Primitive Equations—Part I: The Basic Experiment
,” Mon. Weather Rev.
, 91
(3
), pp. 99
–164
.43.
Piomelli
, U.
, 1999
, “Large-Eddy Simulation: Achievements and Challenges
,” Prog. Aerosp. Sci.
, 35
(4
), pp. 335
–362
.44.
Lévêque
, E.
, Toschi
, F.
, and Bertoglio
, J. P.
, 2007
, “Shear-Improved Smagorinsky Model for Large-Eddy Simulation of Wall-Bounded Turbulent Flows
,” J. Fluid Mech.
, 570
, pp. 491
–502
.45.
Layton
, W. J.
, 2016
, “Energy Dissipation in the Smagorinsky Model of Turbulence
,” Appl. Math. Lett.
, 59
, pp. 56
–59
.46.
Krajnovic
, S.
, and Davidson
, L.
, 2001
, “Large-Eddy Simulation of the Flow Around a Ground Vehicle Body
,” SAE Paper No. 2001-01-0702
.47.
Howell
, J. P.
, 1994
, “The Influence of Ground Simulation on the Aerodynamics of Simple Car Shapes With an Underfloor Diffuser
,” Road Vehicle Aerodynamics Conference
, Loughborough, UK.48.
Soso
, M. D.
, and Wilson
, P. A.
, 2008
, “The Influence of an Upstream Diffuser on a Downstream Wing in Ground Effect
,” Proc. Inst. Mech. Eng., Part D: J. Automobile
, 222
(4
), pp. 551
–563
.49.
Shur
, M. L.
, Spalart
, P. R.
, Strelets
, M.
, Kh
., and Travin
, A.
, 2008
, “A Hybrid RANS-LES Model With Delayed DES and Wall-Modelled LES Capabilities
,” Int. J. Heat Fluid Flow
, 29
(6
), pp. 1638
–1649
.50.
Spalart
, P. R.
, 2009
, “Detached-Eddy Simulation
,” Annu. Rev. Fluid Mech.
, 41
(1
), pp. 181
–202
.51.
Mockett
, C.
, 2009
, “A Comprehensive Study of Detached-Eddy Simulation
,” Ph.D. thesis, Technische Universität Berlin, Germany.52.
Crowther
, W. J.
, Jabbal
, M.
, and Liddle
, S. C.
, 2011
, “Flow Control Fallacies: A Review of Common Pitfalls in Flow Control Research
,” Proc. Inst. Mech. Eng., Part G: J. Aerosp. Eng.
, 225
(1
), pp. 1
–11
.53.
Gad-el-Hak
, M.
, 2000
, Flow Control: Passive, Active, and Reactive Flow Management
, Cambridge University Press
, Cambridge, UK
.54.
Gad-el-Hak
, M.
, and Bushnell
, D.
, M.
, 1991
, “Status and Outlook of Flow Separation Control
,” AIAA
Paper No. AIAA-91-0037.55.
Gad-el-Hak
, M.
, and Bushnell
, D. M.
, 1991
, “Separation Control: Review
,” ASME J. Fluids Eng.
, 113
(1
), pp. 5
–30
.56.
Gad-el-Hak
, M.
, Pollard
, A.
, Bonnet
, J.-P. B.
, eds., 1998
, “Flow Control Fundamentals and Practices
,” Lecture Notes in Physics Monographs
, Springer-Verlag
, Berlin Heidelberg
, Chap. 1–7.57.
Englar
, R.
, 2005
, “Improved Pneumatic Aerodynamics for Drag Reduction, Fuel Economy, Safety and Stability Increase for Heavy Vehicles
,” SAE Paper No. 2005–01–3627
.58.
El-Alti
, M.
, Chernoray
, V.
, Kjellgren
, P.
, Hjelm
, L.
, and Davidson
, L.
, 2010
, “Computations and Full-Scale Tests of Active Flow Control Applied on a Volvo Truck-Trailer, Aerodynamics of Heavy Vehicles—III: Trucks, Buses and Trains
,” Lecture Notes Appl. Comput. Mech.
, 79
, pp. 253
–267
.http://www.tfd.chalmers.se/~lada/postscript_files/el-alti_etal_potsdam.pdf59.
Modi
, V. J.
, Mokhtarian
, F.
, Fernando
, M.
, and Yokomizo
, T.
, 1988
, “Fluid Dynamics of Airfoils With Moving Surface Boundary Layer Control
,” AIAA J. Aircr.
, 25
(2
), pp. 163
–169
.60.
Modi
, V. J.
, Mokhtarian
, F.
, Fernando
, M.
, and Yokomizo
, T.
, 1990
, “Drag Reduction of Bluff Bodies Through Moving Surface Boundary Layer Control
,” AIAA
Paper No. AIAA-90-0298. 61.
Ringleb
, F. O.
, 1961
, “Separation Control by Trapped Vortices
,” Boundary Layer and Flow Control
, Vol. 1
, G. V.
Lachmann
, ed., Pergamon
, Oxford, UK
, pp. 265
–294
.62.
Donelli
, R.
, S.
, D.
, Gregorio
, F.
, and Iannelli
, P.
, 2010
, “Flow Separation Control by Trapped Vortex
,” AIAA
Paper No. 2010-1409. 63.
Rossow
, V. J.
, 1992
, “Two-Fence Concept for Efficient Trapping of Vortices on Airfoils
,” AIAA J. Aircr.
, 29
(5
), pp. 516
–522
.64.
Rossow
, V. J.
, 1994
, “Aerodynamics of Airfoils With Vortex Trapped by Two Spanwise Fences
,” AIAA J. Aircr.
, 31
(1
), pp. 847
–855
.65.
Garcia
, D. L.
, and Katz
, J.
, 2003
, “Trapped Vortex in Ground Effect
,” AIAA J.
, 41
(4
), pp. 674
–678
.66.
Katz
, J.
, and Morey
, F.
, 2008
, “Aerodynamics of Large-Scale Vortex Generator in Ground Effect
,” ASME J. Fluids Eng.
, 130
(7
), p. 071101
.67.
Kuya
, Y.
, Takeda
, K.
, Zhang
, X.
, Beeton
, S.
, and Pandaleon
, T.
, 2009
, “Flow Separation Control on a Race Car Wing With Vortex Generators in Ground Effect
,” ASME J. Fluids Eng.
, 131
(12
), p. 121102
.68.
Prince
, S. A.
, Khodagolian
, V.
, Singh
, C.
, and Kokkalis
, T.
, 2009
, “Aerodynamic Stall Suppression on Airfoil Sections Using Passive Air-Jet Vortex Generators
,” AIAA J.
, 47
(9
), pp. 2232
–2242
.69.
Johnston
, J.
, and Nishi
, M.
, 1989
, “Vortex Generator Jets–a Means for Passive and Active Control of Boundary Layer Separation
,” AIAA
Paper No. AIAA-89-0564.70.
Johari
, H.
, and Rixon
, G. S.
, 2003
, “Effects of Pulsing on a Vortex Generator Jet
,” AIAA J.
, 41
(12
), pp. 2309
–2315
.71.
Scholz
, P.
, Casper
, M.
, Ortmanns
, J.
, Kähler
, C. J.
, and Radespiel
, R.
, 2008
, “Leading-Edge separation control by Means of Pulsed Vortex Generator Jets
,” AIAA J.
, 46
(4
), pp. 837
–846
.72.
Howard
, F. G.
, and Goodman
, L. W.
, 1985
, “Axisymmetric Bluff-Body Drag Reduction Through Geometrical Modification
,” AIAA J. Aircr.
, 22
(6
), pp. 516
–522
.73.
Trancossi
, M.
, 2011
, “An Overview of Scientific and Technical Literature on Coandă Effect Applied to Nozzles
,” SAE Paper No. 2011–01–2591
.74.
Bradshaw
, P.
, 1973
, “Effects of Streamline Curvature on Turbulent Flow
,” AGARDograph AG-169.75.
Newman
, B.
, G.
, 1961
, “The Deflexion of Plane Jets by Adjacent Boundaries-Coandă Effect
,” Boundary Layer and Flow Control
, Vol.1
, G. V.
Lachmann
, Pergamon Press
, Oxford
, pp. 232
–264
.76.
Houghton
, E.
, L.
, and Carpenter
, P.
, W.
, 2003
, Aerodynamics for Engineering Students
, 5th ed., uterworth-Heinemann Publishers
, Oxford, UK
, pp. 507
–512
.77.
Newey
, A.
, 2017
, How to Build a Car
, Harper Collins
, London
.78.
Gibson
, M. M.
, Verriopoulos
, C. A.
, and Vlachos
, N. S.
, 1984
, “Turbulent Boundary Layer on a Mildly Curved Convex Surface—Part 1: Mean Flow and Turbulence Measurements
,” Exp. Fluids
, 2
(1
), pp. 17
–24
.79.
Muck
, K. C.
, Hoffmann
, P. H.
, and Bradshaw
, P.
, 1985
, “The Effect of Convex Surface Curvature on Turbulent Boundary Layers
,” J. Fluid Mech.
, 161
(1
), pp. 347
–369
.80.
So
, R. M. C.
, and Mellor
, G. L.
, 1973
, “Experiment on Convex Curvature Effects in Turbulent Boundary Layers
,” J. Fluid Mech.
, 60
(1
), pp. 43
–62
.Copyright © 2019 by ASME
You do not currently have access to this content.
