Hydrodynamic cavitation downstream a range of micropillar geometries entrenched in a microchannel were studied experimentally. Pressurized helium gas at the inlet tank and vacuum pressure at the outlet propelled distilled water through the device and trigger cavitation. The entire process from cavitation inception to the development of elongated attached cavity was recorded. Three modes of cavitation inception were observed and key parameters of cavitation processes, such as cavity length and angle of attachment, were compared among various micropillar geometries. Cavitation downstream of a triangular micropillar was found to have a distinct inception mode with relatively high cavitation inception numbers. After reaching its full elongated form, it prevailed through a larger system pressures and possessed the longest attached cavity. Cavity angle of attachments was predominantly related to the shape of the micropillar. Micropillars with sharp vertex led to lower cavity attachment angles close to the flow separation point, while circular micropillars resulted in higher angles. Twin circular micropillars have a unique cavitation pattern that was affected by vortex shedding. Fast Fourier transformation (FFT) analysis of the cavity image intensity revealed transverse cavity shedding frequencies in various geometries and provided an estimation for vortex shedding frequencies.
Skip Nav Destination
Article navigation
January 2019
Research-Article
Hydrodynamic Cavitation Downstream a Micropillar Entrained Inside a Microchannel—A Parametric Study
Arash Nayebzadeh,
Arash Nayebzadeh
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: arash.nayebzadeh@knights.ucf.edu
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: arash.nayebzadeh@knights.ucf.edu
Search for other works by this author on:
Hanieh Tabkhi,
Hanieh Tabkhi
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: hanieh.tabkhi@knights.ucf.edu
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: hanieh.tabkhi@knights.ucf.edu
Search for other works by this author on:
Yoav Peles
Yoav Peles
Fellow ASME
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: yoav.peles@ucf.edu
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: yoav.peles@ucf.edu
Search for other works by this author on:
Arash Nayebzadeh
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: arash.nayebzadeh@knights.ucf.edu
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: arash.nayebzadeh@knights.ucf.edu
Hanieh Tabkhi
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: hanieh.tabkhi@knights.ucf.edu
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: hanieh.tabkhi@knights.ucf.edu
Yoav Peles
Fellow ASME
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: yoav.peles@ucf.edu
Department of Mechanical and
Aerospace Engineering,
University of Central Florida,
Orlando, FL 32816
e-mail: yoav.peles@ucf.edu
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received January 5, 2018; final manuscript received May 18, 2018; published online June 27, 2018. Assoc. Editor: Shizhi Qian.
J. Fluids Eng. Jan 2019, 141(1): 011101 (13 pages)
Published Online: June 27, 2018
Article history
Received:
January 5, 2018
Revised:
May 18, 2018
Citation
Nayebzadeh, A., Tabkhi, H., and Peles, Y. (June 27, 2018). "Hydrodynamic Cavitation Downstream a Micropillar Entrained Inside a Microchannel—A Parametric Study." ASME. J. Fluids Eng. January 2019; 141(1): 011101. https://doi.org/10.1115/1.4040374
Download citation file:
Get Email Alerts
Cited By
Related Articles
Large Eddy Simulation of Unsteady Cavitating Flow Around a Highly Skewed Propeller in Nonuniform Wake
J. Fluids Eng (April,2017)
Scaling of Gas Diffusion Into Limited Partial Cavities
J. Fluids Eng (May,2016)
Shear Cavitation in an Annular Jet Pump Under Recirculation Conditions
J. Fluids Eng (June,2016)
Measurement and Modeling of Propeller Cavitation in Uniform Inflow
J. Fluids Eng (July,2004)
Related Proceedings Papers
Related Chapters
Experiment Investigation of Flow Boiling Process Including Cavitation in Micro-Channel
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Cavitating Structures at Inception in Turbulent Shear Flow
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Numerical Simulations of Tip Leakage Vortex Cavitation Flows Around a NACA0009 Hydrofoil
Proceedings of the 10th International Symposium on Cavitation (CAV2018)