In order to study the two-phase flow behaviors of a horizontal bubble plume in a tank, experimental tests along with computational fluid dynamics (CFD) simulations were carried out in this paper. An experimental facility was designed and constructed which allows air–water bubble jet being injected horizontally into a water tank by three-parallel injector nozzles with different gas and liquid superficial velocities (〈jg〉in = 2.7–5.7 m/s and 〈jf〉in = 1.8–3.4 m/s). Two sizes of injector nozzles (D = 0.053 m and 0.035 m) were tested to examine the injector size effect. Important parameters including void fraction, fluid velocity, bubble Sauter mean diameter, and their distributions in the tank were measured and analyzed. In addition to the experimental work, selected flow conditions were simulated with ANSYS CFX 13.0. Compared with the experimental data, the present CFD simulation can predict the general trends of void and flow distributions and the recirculation fluid velocity with an accuracy of ±30%. The present CFD simulation methodology has been validated by the experimental results and can be applied to bubble plume analyses and design.
Skip Nav Destination
Article navigation
November 2016
Research-Article
Experimental Study of Horizontal Bubble Plume With Computational Fluid Dynamics Benchmarking
Shao-Wen Chen,
Shao-Wen Chen
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017;
Purdue University,
West Lafayette, IN 47907-2017;
Institute of Nuclear Engineering and Science,
National Tsing Hua University,
Hsinchu 30013, Taiwan
e-mail: chensw@mx.nthu.edu.tw
National Tsing Hua University,
Hsinchu 30013, Taiwan
e-mail: chensw@mx.nthu.edu.tw
Search for other works by this author on:
Christopher Macke,
Christopher Macke
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Search for other works by this author on:
Takashi Hibiki,
Takashi Hibiki
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Search for other works by this author on:
Mamoru Ishii,
Mamoru Ishii
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Search for other works by this author on:
Yang Liu,
Yang Liu
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017;
Purdue University,
West Lafayette, IN 47907-2017;
Nuclear Engineering Program,
Department of Mechanical Engineering,
Virginia Tech,
Blacksburg, VA 24061
Department of Mechanical Engineering,
Virginia Tech,
Blacksburg, VA 24061
Search for other works by this author on:
Peng Ju,
Peng Ju
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Search for other works by this author on:
Subash Sharma,
Subash Sharma
School of Nuclear engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Search for other works by this author on:
Yoshiyuki Kondo,
Yoshiyuki Kondo
Takasago Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Search for other works by this author on:
Tsutomu Kawamizu,
Tsutomu Kawamizu
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Search for other works by this author on:
Takashi Yoshimoto,
Takashi Yoshimoto
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Search for other works by this author on:
Seiji Kagawa,
Seiji Kagawa
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Search for other works by this author on:
Koichi Tanimoto
Koichi Tanimoto
Takasago Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Search for other works by this author on:
Shao-Wen Chen
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017;
Purdue University,
West Lafayette, IN 47907-2017;
Institute of Nuclear Engineering and Science,
National Tsing Hua University,
Hsinchu 30013, Taiwan
e-mail: chensw@mx.nthu.edu.tw
National Tsing Hua University,
Hsinchu 30013, Taiwan
e-mail: chensw@mx.nthu.edu.tw
Christopher Macke
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Takashi Hibiki
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Mamoru Ishii
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Yang Liu
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017;
Purdue University,
West Lafayette, IN 47907-2017;
Nuclear Engineering Program,
Department of Mechanical Engineering,
Virginia Tech,
Blacksburg, VA 24061
Department of Mechanical Engineering,
Virginia Tech,
Blacksburg, VA 24061
Peng Ju
School of Nuclear Engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Subash Sharma
School of Nuclear engineering,
Purdue University,
West Lafayette, IN 47907-2017
Purdue University,
West Lafayette, IN 47907-2017
Yoshiyuki Kondo
Takasago Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Tsutomu Kawamizu
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Takashi Yoshimoto
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Seiji Kagawa
Hiroshima Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Mitsubishi Heavy Industries, Ltd.,
Kan-on-Shin-Machi4-Chome,
Nishi-ku, Hiroshima City,
Hiroshima 733-8553, Japan
Koichi Tanimoto
Takasago Research and Development Center,
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
Mitsubishi Heavy Industries, Ltd.,
2-1-1 Shinhama Arai-Cho Takasago,
Hyogo 676-8686, Japan
1Corresponding author.
Contributed by the Fluids Engineering Division of ASME for publication in the JOURNAL OF FLUIDS ENGINEERING. Manuscript received June 10, 2015; final manuscript received April 11, 2016; published online July 15, 2016. Assoc. Editor: Mark R. Duignan.
J. Fluids Eng. Nov 2016, 138(11): 111301 (14 pages)
Published Online: July 15, 2016
Article history
Received:
June 10, 2015
Revised:
April 11, 2016
Citation
Chen, S., Macke, C., Hibiki, T., Ishii, M., Liu, Y., Ju, P., Sharma, S., Kondo, Y., Kawamizu, T., Yoshimoto, T., Kagawa, S., and Tanimoto, K. (July 15, 2016). "Experimental Study of Horizontal Bubble Plume With Computational Fluid Dynamics Benchmarking." ASME. J. Fluids Eng. November 2016; 138(11): 111301. https://doi.org/10.1115/1.4033560
Download citation file:
Get Email Alerts
Cited By
Related Articles
Computational Fluid Dynamics Modeling of the Pressure Drop of an Iso-Thermal and Turbulent Upward Bubbly Flow Through a Vertical Pipeline Using Population Balance Modeling Approach
J. Energy Resour. Technol (October,2022)
Annular Gap Bubble Column: Experimental Investigation and Computational Fluid Dynamics Modeling
J. Fluids Eng (January,2016)
Shared-Memory Parallelization for Two-Way Coupled Euler–Lagrange Modeling of Cavitating Bubbly Flows
J. Fluids Eng (December,2015)
New Two-Fluid Model Near-Wall Averaging and Consistent Matching for Turbulent Bubbly Flows
J. Fluids Eng (January,2017)
Related Chapters
Experimental Characterization of a Cavitating Orifice
Proceedings of the 10th International Symposium on Cavitation (CAV2018)
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine
Antilock-Braking System Using Fuzzy Logic
International Conference on Mechanical and Electrical Technology, 3rd, (ICMET-China 2011), Volumes 1–3